3-Series® Control Processor for Crestron Pyng®

Provides a secure, high-performance, rack-mountable control processor and interface for use with Crestron Pyng®. Includes a full complement of onboard control ports to handle larger home automation, home theater, multiroom video, and MDU applications.

Retail: $2,900.00
Price: $2,300.00
You Save: $600.00 (20.7%)
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: CP3-R

    Description

    The 3-Series® Control Processor for Crestron Pyng® (CP3-R) provides a secure, high-performance, rack-mountable control processor with embedded Crestron Pyng OS 2 operating system. It is designed exclusively to function as the core of a Crestron Pyng home automation system, and features enhanced processing power to handle larger home automation, home theater, multiroom video, and MDU applications.

    Through a full complement of onboard control ports, the CP3-R allows Crestron Pyng to integrate with a wide variety of audio, video, lighting, motorized shades, thermostats, door locks, sensors, and other equipment. Integration with a security system is supported using the optional Crestron Pyng COM Port Expander (PYNG-CONNECT-COM sold separately).

    A complete Crestron Pyng home automation system can be controlled and monitored using the Crestron Pyng App (CRESTRON-PYNG), as well as Crestron® touch screens, keypads, handheld remotes, and lighting controls installed in each room of the home.

    Crestron Pyng affords quick custom setup and deployment by a Crestron authorized installer using the Crestron Pyng App or a web browser. Configuration settings are stored onboard the CP3-R and backed up in the cloud to ensure reliable operation and enable secure remote support capability.

    Refer to https://www.crestron.com/crestronpyng for more information about Crestron Pyng, and a list of supported Crestron and third-party equipment.

    Note: Support for infiNET EX® wireless devices is enabled by adding an infiNET EX wireless gateway (CEN-GWEXER or CENI-GWEXER sold separately).

    Key Features
    • Advanced 3-Series® control processor designed exclusively for Crestron Pyng®
    • Enhanced performance to handle larger home automation, home theater, multiroom video, and MDU applications
    • Integrates control and monitoring of audio, video, lighting, shades, thermostats, door locks, sensors, and other equipment
    • Includes built-in IR, COM, I/O, relay, Cresnet®, and high-speed Ethernet control ports [1]
    • Supports infiNET EX® wireless devices via an optional external wireless gateway
    • Communicates with the Crestron Pyng App via an internet connection
    • Enables use of Crestron® touch screens, keypads, lighting controls, and handheld remotes
    • Setup via the Crestron Pyng App or a web browser
    • Dynamic Drivers download automatically from the cloud
    • Reports to the MyCrestron Residential Monitoring Service
    • Backs up all settings in the cloud for reliability and serviceability
    • Supports Crestron Sonnex®, DigitalMedia™, and DM® NVX AV signal routing solutions
    • Supports third-party AVRs, DVRs, TVs, and other equipment
    • Integrates with Sonos® wireless speakers and streaming devices
    • Controls projection screens, lifts, garage doors, gates, and fountains
    • Interfaces with a security system via optional COM port expander
    • Enterprise-class network security
    • Single-space 19” rack mountable
    • External 100-240V power pack included

    Specifications

    Communications
    Ethernet10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, IPv4 or IPv6, Active Directory® authentication, HTTPS web server, SMTP e-mail client
    CresnetCresnet master mode [1]
    USBSupports USB mass storage class devices via rear panel USB 2.0 host port, supports computer console via front panel USB 2.0 device port
    RS-232/422/485For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, one port also supports RS-422 or RS-485 and hardware handshaking
    IRSupports 1-way device control via infrared up to 1.2 MHz
    Memory
    SDRAM1 GB
    Flash4 GB
    Memory CardSupports SD and SDHC cards up to 32 GB (4 GB included)
    External StorageSupports USB mass storage devices up to 1 TB
    Connectors & Card Slots
    RELAY OUTPUT 1 – 8(2) 8-pin 3.5 mm detachable terminal blocks;
    Comprises (8) normally open, isolated relays;
    Rated 1 Amp, 30 Volts AC/DC;
    MOV arc suppression across contacts
    I/O 1 – 8(1) 9-pin 3.5 mm detachable terminal block;
    Comprises (8) “Versiport” digital input/output or analog input ports (referenced to GND);
    Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1;
    Digital Output: 250 mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads;
    Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k Ohms with pull-up resistor disabled;
    Programmable 5 Volts, 2k Ohms pull-up resistor per pin
    IR - SERIAL OUTPUT 1 – 8(2) 8-pin 3.5 mm detachable terminal blocks;
    Comprises (8) IR output ports;
    IR output up to 1.2 MHz;
    Qty. 4 IRP2 IR emitters included, additional emitters sold separately
    COM 1(1) 5-pin 3.5 mm detachable terminal block;
    Bidirectional RS-232/422/485 port;
    Up to 115.2k baud; hardware and software handshaking support
    COM 2 – 3(2) 3-pin 3.5 mm detachable terminal blocks;
    Bidirectional RS-232 ports;
    Up to 115.2k baud; software handshaking support
    MEMORY(1) SD memory card slot;
    Accepts one SD or SDHC card up to 32 GB for storage of log files;
    4 GB SDHC card included
    USB(1) USB Type A connector, female;
    USB 2.0 port for storage devices
    LAN(1) 8-pin RJ45 connector, female;
    10Base-T/100Base-TX Ethernet port
    NET(1) 4-pin 3.5 mm detachable terminal block;
    Cresnet master port [1];
    Outputs power to Cresnet devices if the included power pack is connected to the 24VDC power input jack;
    Alternately functions as a Cresnet power input to power the unit from a Cresnet power supply;
    See “Power” section for additional specifications
    24VDC 2.0A(1) 2.1 x 5.5 mm DC power connector;
    24 Volt DC power input;
    PW-2420RU power pack included;
    Passes through to the NET port to power Cresnet devices;
    See “Power” section for additional specifications
    G(1) 6-32 screw;
    Chassis ground lug
    COMPUTER (front)(1) USB Type B connector, female;
    USB 2.0 computer console port (6 ft / 1.8 m cable included);
    For setup only
    Controls & Indicators
    PWR(1) Green LED, indicates operating power is supplied from the power pack or Cresnet power supply
    NET(1) Amber LED, indicates communication with Cresnet devices
    MSG(1) Red LED, indicates control processor has generated an error message
    HW-R(1) Recessed pushbutton for hardware reset
    SW-R(1) Recessed pushbutton for software reset
    LAN (rear)(2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
    Power
    Power Source OptionsPower pack or Cresnet (connect only one)
    Power Pack (included)Input: 100-240 Volts AC, 50/60 Hz;
    Output: 2.5 Amps @ 24 Volts DC;
    Model: PW-2420RU
    Cresnet Power Usage15 Watts (0.625 Amp @ 24 Volts DC) when powered by a Cresnet power supply
    Available Cresnet Power24 Watts (1 Amp @ 24 Volts DC) when powered by the included power pack
    Power Consumption15 Watts (not including any connected Cresnet devices)
    Environmental
    Temperature41° to 113° F (5° to 45° C)
    Humidity10% to 90% RH (non-condensing)
    Heat Dissipation50 BTU/hr
    Enclosure
    ChassisMetal housing, black finish
    FaceplateExtruded metal, black finish, polycarbonate label overlay
    MountingFreestanding or 1 RU 19-inch rack-mountable (adhesive feet and rack ears included)
    Dimensions
    Height1.70 in (44 mm) without feet
    Width17.28 in (439 mm);
    19.00 in (483 mm) with rack ears
    Depth6.56 in (167 mm)
    Weight
    3.12 lb (1.42 kg)
    Compliance
    UL Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device