1-to-4 4K HDMI Distribution Amplifier

Discontinued

This product has been discontinued.

For a substitute, refer to HD-DA4-4KZ-E.

Price: $575.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: HD-DA4-4K-E

    Description

    The Crestron® HD-DA4-4K-E is a simple to use, high-performance distribution amplifier designed to split a single HDMI® signal to feed up to four separate displays, switchers, AV receivers, and other devices. It handles Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP, 3D, Deep Color, and high-bitrate 7.1 audio. No programming or control system is required for operation.

    For smaller or larger applications, please see the two-output HD-DA2-4K-E and the eight-output HD-DA8-4K-E.

    Key Features
    • Splits one HDMI® source to four outputs
    • Handles video resolutions up to 4K and Ultra HD
    • Handles 3D video and Deep Color
    • Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio
    • HDCP compliant
    • Includes input and output sync indicators
    • No programming or control system required
    • Thin profile – less than one inch deep
    • Surface, shelf, or single rack rail mountable

    Specifications

    Video
    Input Signal TypesHDMI® w/Deep Color, 3D, & 4K (DVI & Dual-Mode DisplayPort compatible [1])
    Output Signal TypesHDMI w/Deep Color, 3D, & 4K (DVI compatible [1])

    Maximum Resolutions
    Scan TypeResolutionFrame
    Rate
    Color
    Sampling
    Color
    Depth
    Progressive4096x2160 4K DCI
    or
    3840x2160 Ultra HD
    24 Hz4:4:430 bit
    30 Hz4:4:424 bit
    30 Hz4:2:236 bit
    60 Hz4:2:024 bit
    2560x1600 WQXGA60 Hz4:4:436 bit
    1920x1080 HD 1080p60 Hz4:4:436 bit
    Interlaced1920x1080 HD 1080i30 Hz4:4:436 bit
    NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
    Audio
    Input Signal TypesHDMI (Dual-Mode DisplayPort compatible [1])
    Output Signal TypeHDMI
    FormatsDolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels
    Communications
    HDMIHDCP & EDID (does not pass CEC)
    EDIDMode selectable for COPY 1ST or DEFAULT:
    • COPY IST copies the EDID from the device connected to OUTPUT 1 and sends it to the source connected to the INPUT [2]
    • DEFAULT = 720x480@60Hz, 1280x720@60Hz, 1920x1080@30Hz, 1920x1080@60Hz (preferred), and 2-channel linear PCM audio)
    Connectors
    INPUT(1) 19-pin Type A HDMI female;
    HDMI digital video/audio input;
    Also supports DVI and Dual-Mode DisplayPort [1]
    OUTPUT 1 – 4(4) 19-pin Type A HDMI female;
    HDMI digital video/audio outputs;
    Also supports DVI [1]
    SERVICE(1) USB Type Mini-B jack;
    For factory use only
    24VDC 0.75A(1) 2.1 x 5.5 mm DC power connector;
    24 Volt DC power input;
    PW-2407WU power pack included
    Controls & Indicators
    PWR(1) Green LED, indicates operating power supplied via power pack
    INPUT(1) Green LED, indicates a video signal at the HDMI input
    OUTPUT 1 – 4(4) Green LEDs, indicate video signals at each corresponding HDMI output
    EDID(1) 2-position slide switch, selects EDID mode
    Power Requirements
    Power Pack0.75 Amps @ 24 Volts DC;
    100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included
    Power Consumption5 Watts typical
    Environmental
    Temperature32° to 104° F (0° to 40° C)
    Humidity10% to 90% RH (non-condensing)
    Heat Dissipation17.1 BTU/hr
    Enclosure
    ChassisMetal, black finish, with (2) integral mounting flanges
    MountingFreestanding, surface mount, or attach to a single rack rail
    Dimensions
    Height4.06 in (104 mm)
    Width8.06 in (205 mm)
    Depth0.87 in (23 mm)
    Weight
    1.11 lb (0.50 kg)