Audio & Video

Sixteen channels of AES-3 digital audio input on dual RJ45 connectorsCIAES16 is a 16-channel AES/EBU (AES3) 24-bit digital input Q-SYS peripheral card that can be used in any Q-SYS Core or I/O Frame. Utilizes IT industry standard RJ45 connectors. It provides a simple and cost-effective way to interface Q-SYS into an existing or new installation

Four channels of microphone / line-level analog audio input with 48V phantom powerFour channels of switchable microphone and/or line-level analog audio input with 48 V phantom power as well as high-quality preamplification and A/D conversion. This card provides inputs for microphones, mixers and CD/DVD players.

Four channels of microphone / line-level analog audio input with high performance preamplifiers and 48V phantom powerFour channels of switchable microphone and/or line-level analog audio input with 48 V phantom power. Features broadcast quality preamplification and A/D conversion. This card provides inputs for microphones, mixers and CD/DVD players.

Contractor power amplifier/ 2 channel, 1100 watts/ch at 8Ω, 2000 watts/ch at 4Ω, 70V/mono at 1000 Watts

Contractor power amplifier/ 2 channel, 200 watts/ch at 8Ω, 300 watts/ch at 4Ω, 70V/mono at 600 Watts

Contractor power amplifier/ 2 channel, 300 watts/ch at 8Ω, 500 watts/ch at 4Ω, 70V/mono at 1200 Watts

Contractor power amplifier/ 2 channel, 500 watts/ch at 8Ω, 800 watts/ch at 4Ω, 70V/mono at 2000 Watts

Four channels (2 DataPorts) for connection to DataPort equipped QSC amplifiersFour audio output channels (2 DataPort connectors) for connection to DataPort equipped QSC amplifiers. The DataPort interface allows audio, status monitoring, and control between Q-SYS and QSC DataPort power amplifiers.

Four channels of balanced, line-level analog outputFour channels of balanced, line-level analog output for interfacing between Q-SYS™ and outboard equipment such as non-DataPort amplifiers, recording devices and teleconference systems.

64 x 64 networked audio channels (Q-LAN / AES67)8x on-board Flex channels and GPIO8x AEC processorsup to 32 x 32 Dante audio channels (8 x 8 included)USB AV bridging (8 x 8 audio + Q-SYS camera support) Full-featured Q-SYS Control engine (with optional feature license)External USB audio device hostUp to 2x VoIP instances1U half-width, includes mounting hardware Network plus on-board I/OIn addition to its 64 x 64 network I/O capacity, the Core 8 Flex offers eight on-board Flex channels and...

1000W active portable loudspeaker system; 12-inch woofer; 1.0-inch compression driver; 75 degree conical waveguide; pole socket; selectable user contours. For use as main or stage monitor. High performance, superior quality and lasting reliability. These are the hallmarks of the QSC brand and the reason why millions of professionals the world-over have come to trust QSC to help them confidently deliver superior experiences and memorable performances. The CP Series follows in that same...

Nylon fabric and mesh cover for temporary outdoor use of CP12 in adverse weather. Removable amplifier panel allows access to connectors and controls. Vented panel maintains airflow for proper heat management. Not intended for permanent outdoor install.

Soft, padded tote made with weather resistant, heavy-duty Nylon/Cordura® material.

Powder coated steel yoke for mounting the CP12 vertically or horizontally to structures. Includes hand-tighten knobs for quick deployment, and hex head bolts for installation. Hand-tighten knobs can be stored in threaded standoffs attached to the yoke.

1000W active, portable loudspeaker system; 8-inch woofer; 1.0-inch compression driver; 90 degree conical waveguide; pole socket; selectable user contours. For use as main or stage monitor.

Nylon fabric and mesh cover for temporary outdoor use of CP8 in adverse weather. Removable amplifier panel allows access to connectors and controls. Vented panel maintains airflow for proper heat management. Not intended for permanent outdoor install.

Soft, padded tote made with weather resistant, heavy-duty Nylon/Cordura® material.

Powder coated steel yoke for mounting the CP8 vertically or horizontally to structures.Powder coated steel yoke for mounting the CP8 vertically or horizontally to walls, beams, or other structures. Includes hand-tighten knobs for quick deployment, and hex head bolts for installation. Hand-tighten knobs can be stored in threaded standoffs attached to the yoke.

Four RJ-11 connectors to interface Q-SYS Cores and I/O Frames to analog telephony (POTS) systemsProvides four RJ-11 interfaces to connect Q-SYS Core to analog telephony environments

Padded soft cover for transport for 2x WL212-sw or GP212-sw

Cover for four (4) WL-3082. For use with CRT3082 caster pallet

CX-Q Series network amplifiers combine a legacy of robust power amplifiers, advancements in high-efficiency output devices and native network transport, control and monitoring capabilities of the Q-SYS Ecosystem. CX-Q 2K4 features four channels, capable of delivering customized power output loading and a total maximum power of up to 2000 W. Low-Z, 70 V or 100 V direct drive are available on all channels.

CX-Q Series network amplifiers combine a legacy of robust power amplifiers, advancements in high-efficiency output devices and native network transport, control and monitoring capabilities of the Q-SYS Ecosystem. CX-Q 4K4 features four channels, capable of delivering customized power output loading and a total maximum power of up to 4000 W. Low-Z, 70 V or 100 V direct drive are available on all channels

8-Channel 500W/CH Q-SYS network Amplifier, Lo-Z, 70V, 100V direct drive, FlexAmp™, with Mic/line Inputs, 100-240v