Crestron AV3

The Crestron AV3 is an enterprise-class control system with an enhanced feature set including built-in control card expansion slots and a dedicated Control Subnet port. Featuring the 3-Series control engine, the AV3 forms the core of any modern networked home or commercial building, managing and integrating all the disparate technologies throughout your facility to make life easier, greener, more productive, and more enjoyable.

Control Engine

• Crestron 3-Series real-time, preemptive multi-threaded/multit'sking kernel; Transaction-Safe EX ended FAT file system; supports up to 10 simultaneously running programs

Memory

• SDRAM 1 GB
• Flash 4 GB
• Memory Card supports SD and SDHC cards up to 32 GB
• EX ernal Storage supports USB mass storage devices up to 1 TB

Communications

• Ethernet 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplEX industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, Bacnet IP, IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client
• Control Subnet10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplEX DH CP server, DNS Server, port forwarding, Isolation Mode
• Cresnet Cresnet master mode
• USB Supports USB mass storage class devices via rear panel USB 2.0 host port, supports computer console via front panel USB 2.0 device port
• RS-232/422/485 For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, two ports also support hardware handshaking, RS-422, and RS-485
• IR/Serial Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud

Connectors & Card Slots

• S1 – S3 3-Series control card EX ansion slots (optional)
• COM 1 – 2 5-pin 3.5mm detachable terminal blocks; Bidirectional RS-232/422/485 ports; Up to 115.2k baud; hardware and software handshaking support
• COM 3 – 6 3-pin 3.5mm detachable terminal blocks; Bidirectional RS-232 ports; Up to 115.2k baud; software handshaking support
• IR - SERIAL OUTPUT 1 – 8 8-pin 3.5mm detachable terminal block comprising (8) IR/Serial output ports;
• IR - SERIAL OUTPUT 1 – 8 IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
• RELAY OUTPUT 1 – 8 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts
• LAN 8-wire RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port; Connects to the customer's LAN

CONTROL SUBNET

• 8-wire RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port, Provides a dedicated local network for Crestron devices
• USB USB Type A female; USB 2.0 port for storage devices
• MEMORY SD memory card slot; Accepts one SD or SDHC card up to 32 GB for memory EX ansion
• I/O 1 – 8 9-pin 3.5mm detachable terminal block comprising (8) "Versiport" digital input/output or analog input ports (referenced to GND)
• Digital Input Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1
• Digital Output 250mA sink from maximum 24 Volts DC, catch diodes for use with "real world" loads
• Analog Input Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k Ohms with pull-up resistor disabled
• Programmable 5 Volts, 2k Ohms pull-up resistor per pin
• NET 4-pin 3.5mm detachable terminal block; Cresnet master port, outputs power to Cresnet devices; See "Power Requirements" for additional specifications
• 100-240V~2.4A 50/60Hz IEC 60320 C14 main power inlet; Mates with removable power cord, included
• G 6-32 screw, chassis ground lug
• COMPUTER (front) USB Type B female; USB 2.0 computer console port (6 ft cable included); For setup only

Controls & Indicators

• PWR Green LED, indicates operating power supplied from AC line
• NET Amber LED, indicates communication with the Cresnet system
• MSG Red LED, indicates control system has generated an error message
• HW-R Recessed pushbutton for hardware reset
• SW-R Recessed pushbutton for software reset
• CNPS FAULT Red LED and pushbutton, LED indicates an EX essive Cresnet load detected at the NET port, pushbutton resets the fault indication
• SLOT 1 – 3 Green LEDs, indicate control cards are inserted in the corresponding slots
• LAN (rear) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity
• CONTROL SUBNET (rear) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity

Power Requirements

• Main Power 2.4 Amps 100-240 Volts AC, 50/60 Hz
• Available Cresnet Power 75 Watts (3.125 Amps 24 Volts DC)

Environmental

• Temperature 41° to 113°F (5° to 45°C)
• Humidity 10% to 90% RH (non-condensing)
• Heat Dissipation 45 BTU/Hr with no Cresnet devices, no control cards 71 BTU/Hr with full Cresnet load, no control cards; See individual control card spec sheets for additional specifications

Enclosure

• Chassis Metal, black finish, vented top and sides
• Faceplate EX ruded metal, black finish, polycarbonate label overlay
• Mounting Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included)

Dimensions

• Height 3.47 in (89 mm) without feet
• Width 17.28 in (439 mm); 19.00 in (483 mm) with rack ears
• Depth 10.06 in (256 mm)
• Weight 4.0 lb (1.9 kg)

Key Features

• Enterprise-class control system
• 3-Series Control Engine substantially faster and more powerful than other control systems
• EX lusive modular programming architecture
• Onboard 1GB RAM & 4GB Flash memory
• EX andable storage up to 1TB
• Rear panel memory card slot
• High-speed USB 2.0 host port
• Industry-standard Ethernet and Cresnet wired communications
• Control Subnet provides a dedicated local network for Crestron devices
• XPanel with Smart Graphicscomputer and Web based control
• iPhone, iPad, and Androidcontrol app support
• Crestron Fusion Enterprise Management Software support
• SNMP remote management support
• Two RS-232/422/485 COM ports with hardware and software handshaking
• Four RS-232 COM ports with software handshaking only
• Eight IR/serial, eight relay, and eight Versiport I/O ports
• Three built-in 3-Series control card EX ansion slots (optional)
• Programmable event scheduling with astronomical time clock
• Native BACnet™/IP support
• IEC 61000-4-5 Installation Class 4 surge immunity on COM, Versiport, and network connections
• Installer setup via Crestron Toolboxsoftware or Web browser
• C#, symbol based, and drag-and-drop programming environments
• Full Unicode (multi-language) support
• Increased network throughput and security
• Secure access through full user/group management or Active Directory integration
• Hardware level security using 802.1X authentication
• TLS, SSL, SSH, and SFTP network security protocols
• FIPS 140-2 compliant encryption
• IIS v.6.0 Web Server
• IPv6 ready
• Front panel USB computer console port
• 2-space rack-mountable