Availability: In Stock
Usually ships In 24 - 48 hours
notify me
Description
The C2N-IO is a very compact device that adds control ports to any Crestron2-Series or 3-Series control system. It connects via the Cresnet control network and provides one RS-232, one IR, and two relay control ports. It can be mounted to any flat surface using two screws or adhesive reclosable fastener (3M Dual Lock included).
Specifications
Communications- Cresnet® Cresnet slave device, 2-Series and 3-Series circledR; compatible
- RS-232 Supports 2-way device control and monitoring up to 115.2k baud with software handshaking
- IR/Serial Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
Connectors- RELAY 1 – 2 (1) 4-pin captive screw terminal block comprising (2) normally open, isolated relays;
- Rated 1 Amp, 30 Volts AC/DC;
- Solid-state arc suppression across contacts
- COM (1) 3-pin captive screw terminal block, bidirectional RS-232 port;
- Up to 115.2k baud; software handshaking support
- IR (1) 2-pin captive screw terminal block, IR/Serial output port;
- 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
- NET (2) 4-pin captive screw terminal blocks;
- Cresnet slave ports, paralleled
Controls & Indicators- NET ID (2) rotary switches for manually setting Cresnet ID;
- '00' setting enables touch-settable ID (TSID)
- PWR (1) green LED, indicates operating power supplied via Cresnet control network
- NET (1) amber LED, indicates communication with Cresnet system
- SETUP (1) red LED and (1) recessed miniature pushbutton for TSID
Power Requirements- Cresnet Power Usage 2.5 Watts (105 mA @ 24 Volts DC)
Environmental- Temperature 32° to 104°F (0° to 40°C)
- Humidity 10% to 90% RH (non-condensing)
- Heat Dissipation 3.5 BTU/Hr
Enclosure- Metal, freestanding or surface mount, surface mount bracket and 3M® Dual Lock® reclosable fastener included, fits inside a 2-gang electrical box or 2-gang UK (BS 4662) electrical box, 35 mm (1.38 in) minimum internal box depth required for C2N-IO and TPCS-4SM(D) combined
Dimensions- Width 3.50 in (89 mm), 4.38 in (112 mm) with bracket
Weight
Additional Information
Key Features- Fits within a 2-gang wall box behind the TPCS-4SM(D)
- Provides 1 RS-232, 1 IR/serial, and 2 relay ports
- Compatible with any Crestron® 2-Series or 3-Series circledR; control system
- Interfaces via the Cresnet® control bus
- 24 Volt DC Cresnet powered
- Surface mount bracket included