Home > Environment Controls >

Crestron C2N-SDC

There are no reviews yet. | Write a review
Shade and Drape Controller, 2 outputs for 120 VAC 3-wire bidirectional motors

Get Custom Programming from 4TEC
Price: $403.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: C2N-SDC

    Description

    The C2N-SDC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling a variety of motorized window treatments as well as motorized doors, sunroofs, lifts and projection screens. The C2N-SDC is a Cresnet device with two independently controlled 120V AC outputs. Each output provides up/down or open/close control of a conventional three-wire bidirectional type motor. Built-in timing and interlock logic make it easy to program the C2N-SDC for failsafe operation.

    Specifications

    Load Ratings
    • Motor Control Channels 2
    • Per Channel 7.5 Amps, 1/3 HP
    • Total 15 Amps
    • Load Types 3-Wire 120V AC bidirectional motors
    Power Requirements
    • Line Power 120 Volts AC, 50-60Hz, single-phase
    • Cresnet Power Usage 3 Watts (0.125 Amps @ 24 Volts DC)
    Connections (rear)
    • Hot (1) Class 1 flying lead, 14 AWG, black, line power input
    • Neutral (1) Class 1 flying lead, 14 AWG, white, neutral
    • Ground (1) Class 1 flying lead, 14 AWG, green, ground
    • Load 1 - 2 (2) 4-pin terminal blocks comprising (2) independent 120V AC 3-wire bidirectional motor control outputs;
    • Includes terminals for up/open drive (U), down/close drive (D), common/neutral (C), and ground;
    • Maximum Wire Size: 14 AWG
    Connectors (front)
    • NET (2) 4-pin 3.5mm detachable terminal blocks;
    • Cresnet slave ports, paralleled;
    • Connect to Cresnet control network
    Buttons
    • 1 UP/DOWN (2) buttons for local control of output #1
    • 2 UP/DOWN (2) buttons for local control of output #2
    • SETUP (1) button used for touch-settable ID (TSID)
    LED Indicators
    • PWR (green) Indicates DC power supplied from Cresnet network
    • NET (yellow) Indicates communication with the Cresnet system
    • SETUP (red) used for touch-settable ID (TSID)
    Environmental
    • Temperature 41° to 122°F (5° to 50°C)
    • Humidity 10% to 90% RH (non-condensing)
    Enclosure
    • Flat metal plate mountable in a 4-inch square or 2-gang electrical box, 1.5 inch minimum depth; mount 2-gang box horizontally to maintain correct orientation
    Dimensions
    • Height 4.10 in (104.1 mm)
    • Width 4.10 in (104.1 mm)
    • Depth 1.15 in (29.2 mm)
    Weight
    • 0.55 lb (0.25 kg)