Availability: In Stock
Usually ships In 24 - 48 hours
notify me
Description
The CHV-THSTAT is a versatile heating and cooling thermostat with integrated humidistat designed for one- and two-stage control of forced air, radiant, and heat pump HVAC systems. Although functional as a standalone thermostat, the CHV-THSTAT delivers greatly enhanced functionality as part of a complete automation system from Crestron Available in white, black, or almond, the stylish wall mount design is a complement to any decor.
Specifications
Measurement Range- Indoor Temperature 0° to 110°F (-18° to 43°C)
- Outdoor Temperature -40 to 170 F (-40 to 77 C)[1]
Temperature Tolerance- Over Full Range 1F (0.5C)
- At Room Temperatures 1F (+0.1/-0.4C)
Humidity ToleranceSetpoint Range- Auto Setpoint 38° to 99°F (3° to 37°C)
- Heat only Setpoint 38° to 89°F (3° to 32°C)
- Cool only Setpoint 59° to 99°F (15° to 37°C)
- Humidity Setpoint 5% to 70% RH[2]
Relay Rating- 1 Amp @ 40 Volts DC or 24 Volts AC (nominal)
Power Requirements- 24V 2 Watts (0.083 Amps) @ 24 Volts AC, supplied by heating or cooling system
- Cresnet Power Usage <1 Watts (<0.05 Amps @ 24 Volts DC), required for Cresnet® communication only
Buttons- MODE Accesses user controls - system mode, fan mode, humidifier, Crestron® system, and global update
- VIEW Accesses humidity reading, outdoor temperature reading[1], system messages, and remote functions
- UP Selects user modes and increments selection in setup modes
- DOWN Selects user modes and decrements selection in setup modes
Display- Type Transflective LCD, backlit
- Viewing Angle 50° horizontal (@0° vertical), 50° vertical (@0° horizontal)
- Displays current indoor temperature and relative humidity, outdoor temperature and relative humidity[2], setpoints, activity, function, Cresnet system information, internal relay status, setup menus, and control system messages.
Connectors- HVAC (2) 9-position terminal blocks comprising the following:
- Power Connections (Required):
- 24 (C): 24 VAC common terminal supplies remote 24 VAC power to thermostat;
- 24 (R): 24 VAC reference terminal – Can be Connected to RH or RC by P4 jumper setting, or tied directly to power source
- HVAC Control Connections (System Dependent):
- HUM: Energized to RHU during humidity call;
- RHU: Reference for humidifier;
- RH: Reference Heat – Used for calls to heating system;
- RC: Reference Cool – Used for calls to cooling system;
- G: Fan – Energized to RC during call for fan;
- Y/Y1: Compressor (stage one) – Energized to RC when compressor (or first stage) is run;
- Y2: Compressor (stage two) – Energized to RC on two-stage systems on call for second stage;
- O: Changeover control – Energized to RC during cooling modes;
- B: Energized to RC during non-cooling modes;
- W/W1: Heat (single stage)/heat (stage one) – Energized to RH during a call for heat in heat/cool systems or aux heat in heat pump systems;
- W2: Heat (stage two) – Energized to RH during a call for second stage heat in heat/cool systems
- Remote Sensing Connections (Optional):
- RSR: Remote Sensor Returns – Common sensor terminal;
- RS1: Remote Sensor terminal – Connect the sensor from RS1 to RSR;
- RS2: Remote Sensor terminal – Connect the sensor from RS2 to RSR
- NETWORK (1) 4-position terminal block;
- Cresnet slave port, connects to Cresnet control network
Enclosure- Plastic, surface-mountable to the front of a horizontally oriented 1-gang electrical box
DimensionsWeight
Additional Information
Measurement Range- Indoor Temperature 0° to 110°F (-18° to 43°C)
- Outdoor Temperature -40 to 170 F (-40 to 77 C)[1]
Temperature Tolerance- Over Full Range 1F (0.5C)
- At Room Temperatures 1F (+0.1/-0.4C)
Humidity ToleranceSetpoint Range- Auto Setpoint 38° to 99°F (3° to 37°C)
- Heat only Setpoint 38° to 89°F (3° to 32°C)
- Cool only Setpoint 59° to 99°F (15° to 37°C)
- Humidity Setpoint 5% to 70% RH[2]
Relay Rating- 1 Amp @ 40 Volts DC or 24 Volts AC (nominal)
Power Requirements- 24V 2 Watts (0.083 Amps) @ 24 Volts AC, supplied by heating or cooling system
- Cresnet Power Usage <1 Watts (<0.05 Amps @ 24 Volts DC), required for Cresnet® communication only
Buttons- MODE Accesses user controls - system mode, fan mode, humidifier, Crestron® system, and global update
- VIEW Accesses humidity reading, outdoor temperature reading[1], system messages, and remote functions
- UP Selects user modes and increments selection in setup modes
- DOWN Selects user modes and decrements selection in setup modes
Display- Type Transflective LCD, backlit
- Viewing Angle 50° horizontal (@0° vertical), 50° vertical (@0° horizontal)
- Displays current indoor temperature and relative humidity, outdoor temperature and relative humidity[2], setpoints, activity, function, Cresnet system information, internal relay status, setup menus, and control system messages.
Connectors- HVAC (2) 9-position terminal blocks comprising the following:
- Power Connections (Required):
- 24 (C): 24 VAC common terminal supplies remote 24 VAC power to thermostat;
- 24 (R): 24 VAC reference terminal – Can be Connected to RH or RC by P4 jumper setting, or tied directly to power source
- HVAC Control Connections (System Dependent):
- HUM: Energized to RHU during humidity call;
- RHU: Reference for humidifier;
- RH: Reference Heat – Used for calls to heating system;
- RC: Reference Cool – Used for calls to cooling system;
- G: Fan – Energized to RC during call for fan;
- Y/Y1: Compressor (stage one) – Energized to RC when compressor (or first stage) is run;
- Y2: Compressor (stage two) – Energized to RC on two-stage systems on call for second stage;
- O: Changeover control – Energized to RC during cooling modes;
- B: Energized to RC during non-cooling modes;
- W/W1: Heat (single stage)/heat (stage one) – Energized to RH during a call for heat in heat/cool systems or aux heat in heat pump systems;
- W2: Heat (stage two) – Energized to RH during a call for second stage heat in heat/cool systems
- Remote Sensing Connections (Optional):
- RSR: Remote Sensor Returns – Common sensor terminal;
- RS1: Remote Sensor terminal – Connect the sensor from RS1 to RSR;
- RS2: Remote Sensor terminal – Connect the sensor from RS2 to RSR
- NETWORK (1) 4-position terminal block;
- Cresnet slave port, connects to Cresnet control network
Enclosure- Plastic, surface-mountable to the front of a horizontally oriented 1-gang electrical box
DimensionsWeight