Crestron DM-TX-200-C-2G-B-T

HDBaseT® Certified
Crestron DigitalMedia 8G+ technology is designed using HDBaseT Alliance specifications, ensuring interoperability with other HDBaseT certified products. Via its DM 8G+ output, the DM-TX-200-C-2G can be connected directly to an HDBaseT compliant device without requiring a DM receiver.

Multimedia Computer/AV Interface
The DM-TX-200-C-2G provides simple switching between two inputs. The inputs can be configured to switch automatically or be selected through a Crestron control system. Inputs include:

• HDMI — Provides a digital multimedia input for mobile devices, computers, and AV sources with resolutions up to HD 1080p60 and WUXGA. Also handles DVI and Dual-Mode DisplayPort signals using an appropriate adapter or interface cable.[3]
• PC — This VGA type input handles analog RGB signals up to WUXGA 1920x1200 pixels, as well as analog video up to 1080p60.[4] A 1/8" (3.5 mm) stereo audio input is included to accommodate the analog audio signal from an unbalanced line-level source or headphone output.

Note: Analog audio breakaway capability enables the analog audio input to be used with either video input.

A single CAT type cable connects the DM-TX-200-C-2G to a DM switcher or receiver, or to an HDBaseT device, transporting video, audio, control, networking, and power signals all through one simple RJ45 connection.[2,5,6] Used with a single DM 8G+ Receiver/Room Controller and optional Crestron control system, the DM-TX-200-C-2G affords a simple solution for extending a computer or AV signal to a single display. As part of a larger system using a DM-MD series switcher, multiple DM-TX-200-C-2Gs may be installed to enable the distribution of several sources at different locations to feed multiple displays throughout any room or larger facility.

USB HID Signal Extension
The DM-TX-200-C-2G functions as a keyboard/mouse extender, allowing a USB HID-compliant keyboard and/or mouse to be connected at the wall plate and used to control a computer or other component located at the central equipment rack or some other location.

CEC Embedded Device Control
DigitalMedia provides an alternative to conventional IR and RS-232 device control by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to the control system, the DM-TX-200-C-2G provides a gateway for controlling the connected source device right through the HDMI connection, potentially eliminating the need for any dedicated control wires or IR emitters.

Simple Wall Box Mounting
The DM-TX-200-C-2G is designed to be installed using a 2-3/4" deep 2-gang electrical box or plaster ring (not included). It also fits a 2-gang opening in a typical 6" deep floor box. The DM cable connects to the rear of the transmitter via a shielded RJ45 DM port. The unit can be powered using the wall mount power pack (included), or PoDM (Power over DigitalMedia) for a true one-wire solution.[5,6] An array of indicators is provided for easy setup and troubleshooting.

Key Features

• DigitalMedia 8G+® transmitter and multimedia interface
• Built-in 2x1 AV switcher with auto-switching and analog audio-breakaway
• QuickSwitch HD™ technology achieves fast, reliable switching
• Connects to a DM® switcher or receiver over a single CAT type twisted pair cable [1]
• Supports cable lengths up to 330 ft (100 m) using DM 8G® cable or CAT5e [1]
• HDBaseT® Certified — Enables direct connection to other HDBaseT certified equipment
• Provides HDMI® and RGB/component video inputs [4]
• Also supports DVI and Dual-Mode DisplayPort sources [3]
• Handles video resolutions up to Full HD 1080p
• Handles computer resolutions up to WUXGA
• Handles Dolby Digital®, DTS®, and uncompressed 7.1 linear PCM audio
• HDCP compliant
• Includes a mini-TRS stereo analog audio input
• Detects and reports detailed video and audio input information
• Performs automatic AV signal format management via EDID
• Enables device control via CEC
• Enables USB HID signal extension for a local keyboard/mouse
• Allows quick, easy setup and diagnostics
• 2-gang wall box mount design (2-3/4" deep)
• Also fits in a typical 6” deep floor box
• Available in black or white finish
• Powered via the DM connection or local power pack (included) [5,6]