Crestron GLD-DALI-LED-L-2X100W

Crestron Green Light Dimmable LED Drivers (GLD-LED) provide manufacturers of dimmable LED lighting fixtures with a high-performance, cost-saving LED driver solution. Offered in two compact case styles, the GLD-LED series fits easily into a wide range of enclosures and fixture designs. The choice of DALI or 0-10V control enables compatibility with virtually any lighting control system. All models are operable between 120V and 277V, reducing inventory costs for manufacturers serving multiple regions.

Input

• Voltage 120-277 Volts AC

• Frequency 50/60 Hz

• Current (50W Models) 0.7 Amp maximum

• Current (100W Models) 1.05 Amps maximum at 120 Volts, 60 Hz;

• 0.5 Amp maximum at 230 Volts, 50 Hz;

• 0.45 Amp maximum at 277 Volts, 60 Hz

• Number of Class 2 LED Outputs Single-channel 50W models = 2;

• Single-channel 100W models = 4;

• 2-channel 50W models = 1 per channel;

• 2-channel 100W models = 2 per channel

• Number of Dimming Channels 1 or 2 depending on model

• Voltage (50W Models) 55 Volts typical

• Voltage (100W Models) 57 Volts typical, 60 Volts maximum

• Power (50W Models) 50 Watts maximum

• Power (100W Models) 100 Watts maximum

• Current Range configurable from 200 mA to 1050 mA per output

• Current Accuracy 5%

• Type Constant current

• Range 0-100%

• Curve Configurable for linear or logarithmic

• Control Interface DALI® or 0-10 Volts DC (current sink and current source compatible), depending on model

• Standby power <0.5 Watt

• Inrush current 30 mAs at 277 Volts

• (50W Models)

• Inrush current 35 Amps 240 S at 120 Volts, 60 Hz;

• (100W Models) 67 Amps 240 S at 230 Volts, 50 Hz;

• 75 Amps 240 S at 277 Volts, 60 Hz

• Surge protection 1 kV differential mode surge, 2 kV common mode surge

• (50W Models)

• Surge protection 3 kV L to N, 4 kV L/N to ground

• (100W Models)

• Efficiency (50W Models) 89% at full load, 85% above 67% load

• Efficiency (100W Models) 90% at full load, 87% above 50 Watt output

• Power Factor >0.9

• (50W Models)

• Power Factor >0.94

• (100W Models)

• THD (50W Models) <17% at full load

• THD (100W Models) <10% at full load

• Thermal Management Supports LED temperature feedback using 47k Ohm NTC thermistor (not included)

• Configurable Parameters (via CREScode™) Output current (per LED output), dimming curve, minimum dimming level, NTC temperature

• INPUT 120-277V (1) 3-position pushbutton terminal block for Line, Neutral, and Ground[1]

• DALI (DALI Models Only) (2) 2-position pushbutton terminal blocks for interface to DALI bus[1]

• 0-10V (LV Models Only) (1) 2-position pushbutton terminal block for 0-10V control input[1]

• OUTPUT 1 – 2 (2) 2-position pushbutton terminal blocks for LED outputs[1]

• (50W Models)

• OUTPUT 1 – 4 (4) 2-position pushbutton terminal blocks for LED outputs[1]

• (100W Models)

• CREScode/NTC (1) 2-position pushbutton terminal block for interface to CREScode configuration tool during factory setup, and for 47k Ohm NTC thermistor during operation[1]

• Temperature Range -4° to 122° F (-20° to 50° C)

• (50W Models)

• Temperature Range -40° to 122° F (-40° to 50° C)

• (100W Models)

• Maximum Tc 185°F (85°C)

• (50W Models)

• Maximum Tc 185° F (85° C)

• (100W Long Case Models)

• Maximum Tc 181° F (83° C)

• (100W Short Case Models)

• Life EX ectancy 50,000 hours at or below maximum rated ambient temperature

• MTBF 480,000 hours

• Metal, painted

• 50W Long Case Height: 1.18 in (30 mm);

• Width: 17.48 in (444 mm);

• Depth: 0.83 in (21 mm)

• 50W Short Case Height: 2.99 in (76 mm);

• Width: 5.12 in (130 mm);

• Depth: 1.18 in (30 mm)

• 100W Long Case Height: 1.61 in (41 mm);

• Width: 14.57 in (370 mm);

• Depth: 1.18 in (30 mm)

• 100W Short Case Height: 3.15 in (80 mm);

• Width: 9.06 in (230 mm);

• Depth: 1.18 (30 mm)

• 50W Long Case 12.7 oz (360 g)

• 50W Short Case 12.4 oz (350 g)

• 100W Long Case 31.1 oz (880 g)

• 100W Short Case 31.1 oz (880 g)

Key Features

• Programmable, dimmable, high-power LED drivers
• DALI® or 0-10 Volt controllable
• Superior, smooth dimming to below 1%
• EX ellent color stability, even at low dimming levels
• Linear or logarithmic dimming curve
• High efficiency over a wide power and voltage range
• CREScode™ programmable for use with a wide variety of LED fixtures
• Cost-reducing due to fewer inventory requirements
• Multiple outputs with independent LED current settings
• 2-channel models that support tunable white lighting and direct-indirect fixtures
• NTC interface for robust thermal management
• Available in long or short case form factors
• Compatible with 120 Volt, 230 Volt, and 277 Volt AC systems
• Available 50 Watt and 100 Watt models