Dual Power Control Module - International Version, 230V

An expansion module for Crestron control systems to provide switched power control for two independent devices.

Get Custom Programming from 4TEC

Price: $345.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: STI-PC

    Description

    The ST-PC is a Cresnet expansion module that provides switching of AC power to two individual loads for on/off control of video monitors, tape decks, small audio amplifiers, and other AC powered devices. The ST-PC may be used to provide a power control interface wherever required for loads up to 1200 Watts, and may be rack-mounted using the optional ST-RMK rack mount kit (sold separately). Communication with the control system is via a single Cresnet connection.

    Specifications

    Connectors
    POWER A – B(2) 3-prong grounded AC sockets, switched AC power outlets;
    Maximum Load per Outlet: 10 Amps at 120 Volts AC tungsten load;
    Maximum Load Total: 10 Amps at 120 Volts AC
    POWER IN(1) 6 ft (1.83m) cable with grounded AC plug;
    Connects to AC power source
    NET(2) 6-pin RJ11 female, Cresnet slave ports, paralleled;
    Connect to Cresnet control network
    12VDC(1) 2.5mm barrel DC power jack
    12 Volt DC power input (PW-1205 power pack included)
    Controls & Indicators
    PWR(1) green LED, indicates power supplied from Cresnet network or local power pack
    NET(1) amber LED, indicates communication with Cresnet system
    POWER A – B(2) pushbuttons and red LEDs; pushbuttons toggle each corresponding power outlet on/off when control system is inactive, or function as programmable pushbuttons when control system is active; LEDs indicate when corresponding outlet is on
    Power Requirements
    Power Pack0.5 Amp @ 12 Volts DC;
    120 Volts AC, 60 Hz power pack, model PW-1205, included
    Cresnet Power Usage4 Watts (0.167 Amp @ 24 Volts DC) with no power pack connected
    Environmental
    Temperature41° to 113°F (5° to 45°C)
    Humidity10% to 90% RH (non-condensing)
    Enclosure
    ChassisMetal, black finish
    FaceplateExtruded aluminum, black finish with polycarbonate label overlay
    MountingFreestanding or 1U 1/2-width 19-inch rack-mountable (adhesive feet included, ST-RMK rack kit sold separately)
    Dimensions
    Height1.80 in (46 mm);
    1.70 in (44 mm) without feet
    Width7.07 in (180 mm)
    Depth6.32 in (161 mm)
    Weight
    2.7 lb (1.15 kg)
    INTERNATIONAL VERSION (230 VAC)
    STI-PC
    All the features and specifications of the ST-PC except:
    Connectors (partial)
    POWER A – B(2) 6 ft (1.83m) cables with inline female IEC connector, switched AC power outlets;
    Maximum Load per Outlet: 5 Amps at 250 Volts AC;
    Maximum Load Total: 6 Amps at 250 Volts AC
    Power Requirements
    Power Pack0.5 Amp @ 12 Volts DC;
    230 Volts AC, 50 Hz power pack, model PWI-1215, included
    Cresnet Power Usage4 Watts (0.167 Amp @ 24 Volts DC) with no power pack connected
    Weight
    2.8 lb (1.3 kg)