Crestron

The GLS-ODT-C-NS is a low-profile, ceiling-mount occupancy sensor that delivers a powerful and cost-effective solution for reducing energy costs and enhancing the functionality of standalone lighting systems. It is designed for large areas up to 2000 square feet to detect when the room is occupied, making it great for use in large spaces such as auditoriums, warehouses, and building lobbies. Dual-technology motion sensing, available with the GLS-ODT-C-NS, affords extreme reliability for...

Crestron Green Light sensors deliver a powerful and cost-effective solution for reducing energy costs and enhancing the functionality of lighting and environmental systems. The GLS-ODT-W-1200 is a wall or ceiling mount occupancy sensor designed for areas up to 1200 square feet to detect when the room is occupied. Advanced self-adaptive, dual-technology motion sensing affords extreme reliability for control of lighting, climate control and other devices in the room.

The CHV-RSS is a remote temperature sensor designed for use with select Crestron thermostats. Ideally suited for concrete slab, under floor, or any outdoor installation, the CHV-RSS is an extremely accurate temperature sensor potted within a rugged, waterproof stainless steel sleeve. Using CAT5 or similar low-capacitance wire, the remote sensor may be mounted up to 500 feet (152 meters) from the thermostat. One-piece mounting and a single non-polarized twisted-pair connection make the CHV-RSS...

The CHV-RTHS is a wall-mounted remote temperature and relative humidity sensor designed for use with select Crestron thermostats. Using CAT5 or similar low-capacitance wire, the remote sensor may be mounted up to 500 feet (152 meters) from the thermostat. One-piece mounting and a single non-polarized twisted-pair connection make the CHV-RTHS simple to install. The 1-1/2 inch diameter face protrudes just 1/8 inch from the wall surface and is easily painted or wallpapered to blend into the wall...

The CLW-LDIMEX-is a plug in dimmer designed to operate as part of a complete Crestron automation system communicating via the infiNET EX wireless control network. Without the need for additional control wiring, the CLW-LDIMEX-easily acts in place of standard in-wall dimmer or light switch for conventional floor and table lamps.infiNET EXUltra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need...

The CLCI-1SW2EX-is a 2-channel switch capable of controlling 2 independent 230 VAC lighting loads. Its ultra-slim design allows it to be installed in the ceiling, next to or near the fixture. Powered by infiNET EX technology, the CLCI device communicates wirelessly with The Crestron control system, making it perfect for both new and retrofit applications. Best of all, the CLCI installs inline without requiring any special wiring and can be controlled via a standard light switch.

Crestron Green Light sensors deliver a powerful and cost-effective solution for reducing energy costs and enhancing the functionality of lighting and environmental systems. The GLS-ODT-C-CN is a low-profile ceiling-mount occupancy sensor designed for large areas up to 2000 square feet to detect when the room is occupied, making it great for use in large spaces such as auditoriums, warehouses, and building lobbies. Dual-technology motion sensing, available with the GLS-ODT-C-CN, affords extreme...

The C2N-IRGW-F IR Gateway is a 1-way infrared receiver for Crestron iR wireless handheld remotes and touch panels. It is also compatible with any third-party IR remote utilizing the RC5 command set.

The CLS-EXP-DIM enables the expansion of Crestron iLux Integrated Lighting System (CLS-C6 series) and other Crestron lighting dimmers to support 120, 230, or 277 Volt loads up to 16 Amps. It allows any output channel of the iLux system to dim a fully loaded circuit of LED[1], incandescent, magnetic low-voltage, neon/cold cathode, or 2-wire dimmable fluorescent lighting loads. It is also compatible with CLW-Series[2] in-wall dimmers and select CLX-Series lighting control modules[3].

The CLS-EXP-DIMFDB enables the expansion of Crestron iLux Integrated Lighting System (CLS-C6 series) and other Crestron lighting dimmers to allow control of 3-wire electronic fluorescent dimming ballasts. A single model supports 120, 230, or 277 Volt loads up to 16 Amps. Any output channel of the iLux system can be used to control the CLS-EXP-DIMFDB to dim a fully loaded circuit. It is also compatible with CLW-Series[1] in-wall dimmers and select CLX-Series lighting control modules[2].

The CLS-EXP-DIMFLV is a 0-10 Volt dimming expansion module for The Crestron iLux Integrated Lighting System (CLS-C6 Series) and other Crestron lighting dimmers. It can also be used to switch non-dimmable loads. A single model supports a 120, 230, or 277 Volt load up to 16 Amps.Any output channel of the iLux system can be used to control the CLS-EXP-DIMFLV. It is also compatible with CLW Series[1] in-wall dimmers and select CLX Series lighting control modules.[2] The metal enclosure is designed...

The C2N-RTHS is a wall-mounted temperature and relative humidity sensor that communicates directly with any Crestron control System via the Cresnet control network. One-piece mounting makes the C2N-RTHS simple to install. The 1-1/2 inch diameter face protrudes just 1/8 inch from the wall surface and is easily painted or wallpapered to blend into the wall surface.