Crestron

The CLTI terminal blocks are designed to install in CAEN and CAENIB automation enclosures to facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Electrical bypass jumpers on each terminal facilitate testing of each circuit and protect the module during installation. Each CLT terminal block assembly weighs...

The CLTI terminal blocks are designed to install in CAEN and CAENIB automation enclosures to facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Electrical bypass jumpers on each terminal facilitate testing of each circuit and protect the module during installation. Each CLT terminal block assembly weighs...

The CLTI terminal blocks are designed to install in CAEN and CAENIB automation enclosures to facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Electrical bypass jumpers on each terminal facilitate testing of each circuit and protect the module during installation. Each CLT terminal block assembly weighs...

The CLTI terminal blocks are designed to install in CAEN and CAENIB automation enclosures to facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Electrical bypass jumpers on each terminal facilitate testing of each circuit and protect the module during installation. Each CLT terminal block assembly weighs...

Crestron FTA-CP Connector Plates are designed for use with 600 Series FlipTop to provide panel-mounted connectors within the FlipTop connection compartment. Up to four connector plates can be installed in a single FlipTop (refer to the FlipTop spec sheet for additional information).

Crestron FTA-CP Connector Plates are designed for use with 600 Series FlipTop to provide panel-mounted connectors within the FlipTop connection compartment. Up to four connector plates can be installed in a single FlipTop (refer to the FlipTop spec sheet for additional information).

Replacing an existing wall-mounted Crestron touch screen with a new TSW-750, TSW-752, TSW-1050, or TSW-1052 touch screen is simplified using a TSW-RMB Retrofit Mounting Bracket. A complete set of brackets is available to streamline the process without having to tear up or patch the wall surface. The TSW-RMB simply mounts over the existing back box, mounting kit, or cut-out to accommodate the new touch screen.

Replacing an existing wall-mounted Crestron touch screen with a new TSW-750, TSW-752, TSW-1050, or TSW-1052 touch screen is simplified using a TSW-RMB Retrofit Mounting Bracket. A complete set of brackets is available to streamline the process without having to tear up or patch the wall surface. The TSW-RMB simply mounts over the existing back box, mounting kit, or cut-out to accommodate the new touch screen.

50 ft. (15 m) plenum rated CAT5e cable supporting (1) Ethernet LAN signal. All connections are 8P8C RJ45 male type.

This premium HDMI cable provides a perfect connection for HD devices. The Perfect Lock HDMI connector keeps the cable securely locked when plugged into any Type A receptacle, yet is easily disengaged with a simple pull of the connector body.

Provides a 6 ft. (1.8 m) plenum-rated DC power extension cable for use with the MP-AMP30, MP-AMP40, and other 24 Volt DC powered devices. Installed between the powered device and its power pack, this cable enables the MP-AMP30 or MP-AMP40 to meet the requirements for installation in an environmental air-handling space. It is terminated with a 2.1 x 5.5 mm DC power connector on the device end, and a 2.1 x 5.5 mm DC power barrel connector on the power supply end.

Crestron FTA-CP Connector Plates are designed for use with 600 Series FlipTop to provide panel-mounted connectors within the FlipTop connection compartment. Up to four connector plates can be installed in a single FlipTop (refer to the FlipTop spec sheet for additional information). An assortment of connector plates is offered: