Crestron

he Crestron® USB over Category Cable Extenders (USB‑EXT‑2‑LOCAL and USB‑EXT‑2‑REMOTE) deliver reliable, high‑speed USB signal extension for USB 1.1 and 2.0 devices in a conference room, classroom, auditorium, command center, medical facility, public space, or residence. Without requiring any special configuration or drivers, the USB extenders enable wire runs up to 330 ft (100 m) over a single CAT5e (or better) unshielded twisted-pair (UTP) cable. The USB extenders support most USB device...

A 6 ft. (1.8 m) RS-232 serial control cable for use with the BPC-8 Basic Presentation Controller to enable RS-232 device control and firmware uploading.

The STCP-501 is an adaptor allowing for the connection of a DB9-equipped RS-232 cable to an RJ-11 type Crestron COM port.

The ST-SPL splits one Crestron iR port into five, allowing control of up to five dissimilar devices via multiple STIRP infrared probes.

The CNRJ11 is a 1-1 converter used to adapt between a standard 4-wire Cresnet cable and a modular Cresnet cable. One 4-pin connector and one 6-pin RJ11 jack are provided, wired in parallel. The CNRJ11 is a useful accessory for wiring standard 4-wire Cresnet cable to certain control modules, pan/tilt heads, and SmarTouch wired touch panels that utilize an RJ11 NET connector.

The CNSP-XX is an interface cable for connection of any controllable third-party device to a DB9M type Crestron COM port. Contact Crestron for exact models and configurations.

PinPoint enhances the intelligence and personalization of your Crestron system by enabling your iPhone or iPad to always know what room it's in. PinPoint works with The to ensure that the controls displayed on your device are applicable to the room you're in. Walk into the kitchen and you're automatically presented with lighting, audio, and TV controls for that room. Move into the family room and instantly start controlling the lighting, shades, and home theater system in that room. With...

The PW-0550R is the regulated power pack that is included as standard with Media Manifold TV distribution products.

The ST-BTPN is a high-performance NiMH (Nickel Metal Hydride) rechargeable battery pack for Crestron SmarTouch wireless touch panels. The battery pack is easily installed and removed without tools from the bottom panel of the touch panel. One (1) ST-BTPN is included with each SmarTouch wireless touch panel. Additional spares or replacements may be purchased individually.

The ST-XX is an interface cable for connection of any controllable third-party device to an RJ11 type Crestron COM port. Contact Crestron for exact models and configurations.