Crestron

The CNXRMAK is a 2-space rack mount kit that is used to install up to three Crestron C2N-HBLOCK Cresnet distribution blocks or three CNPWS-75 Cresnet power supplies (or any combination thereof) into a 19-inch EIA equipment rack. Includes (1) black metal 2U rack mounting panel and (12) 6-32 device mounting screws.

The ST-RMK is a single-space rack mount kit designed to accommodate one or two Crestron 1RU half-width devices. Such devices include certain DigitalMedia transmitters, radio tuners, and control modules. The ST-RMK includes (1) black metal rack mount tray, (1) half-width front filler plate and bracket, and additional device mounting hardware. It provides a complete solution for mounting either a single device or two side-by-side devices in a single 19-inch EIA rack space.

The TST-600-DSW-BBI provides a recess wall-mounted metal back box for the TST-600-DSW Wall Dock (and TST-600-WALL and TST-602-WALL Wall Mount Wireless Touch Screens). It is designed for installation in concrete and masonry applications. Conduit knockouts are provided on the top and bottom.

The WMKT-V15 mounting kit provides a quick solution for installing a V15-WALL V-Panel 15" Wall Mount Touch panel Display, or a TPMC-V15-WALL V-Panel Integrated 15" Wall Mount Touch panel, in an existing wall, lectern, or similar flat surface. It is also compatible with the WMKC-V15 Wall Mount Conversion Kit. Designed for post-construction applications, the WMKT-V15 includes a trim ring to provide a smooth edge around the cut-out opening.

The RMK-3U is a 3-space 19" rack mount shelf designed to provide a universal rack-mounting solution for all kinds of components and devices, with features included to accommodate the Adagio AAS Audio Server. Ships unassembled.

The BB-V15 back box provides a UL-listed recess-mount steel enclosure for the V15-WALL V-Panel 15" Wall Mount Touch panel Display, or the TPMC-V15-WALL V-Panel Integrated 15" Wall Mount Touch panel. It is also compatible with the WMKC-V15 Wall Mount Conversion Kit. Designed for pre-construction applications, the BB-V15 permits fastening to the studs of a framed wall prior to installation of sheet rock. An assortment of knockouts is provided to accommodate conduit fittings, and a blank cover...

The SMK-4SM/730 is a low-profile swivel mount accessory for the TTK-4SM and TSW-730-TTK TableTop Kits. It provides a means for permanently mounting the TableTop Kit to a table, desk, or counter top surface while retaining the ability to rotate it for optimal positioning. The swivel range can be customized using optional limit screws, with a maximum of 330-degree rotation allowed.

The TST-600-DSW-BB provides a recess wall-mounted metal back box for the TST-600-DSW Wall Dock (and TST-600-WALL and TST-602-WALL Wall Mount Wireless Touch Screens). Designed for pre-construction applications, the TST-600-DSW-BB permits fastening to the left or right-hand stud of a framed wall prior to installation of drywall. Conduit knockouts are provided on the top and bottom. A blank cover plate is included to provide a temporary cover of the opening during construction.

The TSW-550/750/1050-SMK is a low-profile swivel mount accessory for the TSW-550-TTK, TSW-750-TTK, and TSW-1050-TTK TableTop Kits. It provides a means for permanently mounting the device to a table, desk, or counter top surface while retaining the ability to rotate it for optimal positioning. The swivel range can be customized using optional limit screws, with a maximum of 330-degree rotation allowed.

The WMKM-V15 mounting kit provides a quick solution for installing a V15-WALL V-Panel 15" Wall Mount Touch panel Display, or a TPMC-V15-WALL V-Panel Integrated 15" Wall Mount Touch panel, in an existing wall or similar flat surface. It is also compatible with the WMKC-V15 Wall Mount Conversion Kit. Designed for post-construction applications, the WMKM-V15 includes a MMK-V15 mud ring to compensate for drywall cutout imperfections.

The RMK-5U is a 5-space 19" rack mount shelf designed to provide a universal rack-mounting solution for all kinds of components and devices, with features included to accommodate the Adagio AES, AMS, or AMS-AIP. Ships unassembled.

These simple accessories are designed to be attached to framing prior to the installation of drywall in preparation for the installation of Crestron speakers They allow for versatile positioning over wall studs and ceiling joists spaced 16 inches to 24 inches on center.