Crestron

The CNPCI-8 is a power control interface with 8 isolated SPST relays, each rated up to 20 Amps for 120 or 277 Volt AC non-dimmable lighting or power control. The unit is housed in a surface mount NEMA style enclosure, and is designed to communicate with any 2-Series control system via the Cresnet control network. In addition, eight direct inputs are provided to allow for local control using external momentary pushbuttons or contact closures.

To ensure premium electrical circuit protection for our CAEN-MLO automation enclosures, Crestron has selected Eaton Type CH circuit breakers. These breakers are available directly from Crestron in a choice of thermal magnetic, ground fault, and combination arc fault breaker types.

The CAEN-MK is the mounting kit required to mount (1) C2N-SPWS300 Cresnet power supply or (1) C2N-NPA8 Cresnet network poll accelerator into a CAEN or CAENIB automation enclosure. Using the CAEN-MK, either component occupies 1 module space in a single-width CAEN enclosure, or 2 side-by-side module spaces in a double-width CAEN enclosure. The complete kit includes all DIN rail terminal block components required to terminate the device's 120VAC power cable.

The CAEN-BLOCK is a Cresnet terminal block designed specifically for Crestron lighting and automation systems to link extension enclosures and satellite enclosures to the central PAC2 or PAC2M control system. The CAEN-BLOCK mounts at the bottom of each CAEN or CAENIB enclosure that does not contain a control system to provide Cresnet and Override signal connectivity for CLX-Series lighting control modules within. The CAEN-BLOCK serves as a parallel distribution block for multiple Cresnet...

CAEN-CK Cover Kits are designed to extend the depth of Crestron's CAEN and CAENIB Automation Enclosures, affording 1.5 inch (3.81 cm) additional depth to accommodate EX ess wiring and third-party devices.

CAEN-CK Cover Kits are designed to extend the depth of Crestron's CAEN and CAENIB Automation Enclosures, affording 1.5 inch (3.81 cm) additional depth to accommodate EX ess wiring and third-party devices.

CAEN-CK Cover Kits are designed to extend the depth of Crestron's CAEN and CAENIB Automation Enclosures, affording 1.5 inch (3.81 cm) additional depth to accommodate EX ess wiring and third-party devices.

Designed for the CAENIB Series Automation Enclosures, these blank plates are used to fill the holes in the enclosure cover panel in front of any terminal block position that does not have a CLTIBN type circuit breaker terminal block installed. A set quantity of blank plates is included with each enclosure. The CAENIB-BP provides 5 additional blank plates and hardware.

To ensure premium electrical circuit protection for our CAEN-MLO automation enclosures, Crestron has selected Eaton Type CH circuit breakers. These breakers are available directly from Crestron in a choice of thermal magnetic, ground fault, and combination arc fault breaker types.