Crestron

The DM-RX1-1G is a DM CAT receiver that installs in a single-gang electrical box to provide a convenient interface for a single display device as part of a complete Crestron DigitalMedia system. The DM-RX1-1G is ideal for wall, lectern, and floor box applications in a boardroom, classroom, auditorium, or residence. It provides a single HDMI output and connects to the head end using a single Crestron DM cable[1]. Standard gang-box mounting allows for installation adjacent to an Ethernet jack...

The QM-MDM3X1 is a compact 3x1 QuickMedia switcher designed to EX and the input capacity of a single QM-RMCRX-BA Receiver or any device with a QM Input port. It attaches directly to the top of a QM-RMCRX-BA, providing inputs for up to three QuickMedia Wall Plates, FlipTop Boxes, and other QM Transmitters. It can also be installed beneath a table* or in a closet* to provide localized switching of any three QM sources.

The Crestron® HD-MD4X2-4K-E is a simple to use, ultra high-definition signal switcher with four HDMI® inputs and two HDMI outputs. It handles Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP, 3D, Deep Color, and high-bitrate 7.1 audio. Operation is enabled using the onboard controls, a Web browser, or a Crestron control system. Simplified setup is facilitated through the front panel OLED display or a Web browser.4K Ultra HDSupport for 4K video is essential to ensuring...

The Crestron® HD-DA8-4K-E is a simple to use, high-performance distribution amplifier designed to split a single HDMI® signal to feed up to eight separate displays, switchers, AV receivers, and other devices. It handles Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP, 3D, Deep Color, and high-bitrate 7.1 audio. No programming or control system is required for operation.For smaller applications, please see the two-output HD-DA2-4K-E and the four-output HD-DA4-4K-E. Key...

A DM-MDA-FANTRAY provides a backup replacement cooling fan tray assembly for a CrestronDM-MD64X64 or DM-MD128X128 DigitalMedia Switcher. The DM-MDA-64-FANTRAY is the fan tray for the DM-MD64X64; the DM-MDA-128-FANTRAY is the fan tray for the DM-MD128X128. The DM-MD64X64 and DM-MD128X128 each ship with one fan tray included. On either switcher, the complete fan tray assembly can be swapped in seconds on-site without requiring any tools, and without shutting down or removing the switcher from...

The DM-TX-200-2G is a DM CAT transmitter and switcher that installs in a double-gang electrical box to provide a convenient interface for computers and high-definition AV sources as part of a complete Crestron DigitalMedia system. The DM-TX-200-2G is ideal for wall, lectern, and floor box applications in a boardroom, classroom, auditorium, or residence. It connects to the head end or display location using a single Crestron DM cable, providing HDMI, VGA, and analog audio inputs, plus a USB HID...

The DM-TX-200-2G is a DM CAT transmitter and switcher that installs in a double-gang electrical box to provide a convenient interface for computers and high-definition AV sources as part of a complete Crestron DigitalMedia system. The DM-TX-200-2G is ideal for wall, lectern, and floor box applications in a boardroom, classroom, auditorium, or residence. It connects to the head end or display location using a single Crestron DM cable, providing HDMI, VGA, and analog audio inputs, plus a USB HID...

The QM-MD4X2 is a 4X2 QuickMedia matrix switcher designed to provide versatile routing of up to 4 inputs from QuickMedia Wall Plates and FlipTop Boxes to either of 2 QuickMedia Receivers. All signal routing is provided over in extensive CAT5e type cable* via Crestron's exclusive QuickMedia transport, supporting the distribution of high-resolution RGB, video, stereo audio and microphone signals up to a total of 450 feet end-to-end. Audio breakaway capability allows audio signals to be routed...

The HD-MD8X1-4K from Crestron® provides an ultra high-definition presentation switcher with advanced features optimally suited for installation in a huddle room, conference room, or classroom. It integrates a multi-format auto-switcher, 4K video scaler, audio DSP, and control interface, all into one compact device that mounts conveniently under a table or in an equipment rack. Built-in Crestron Connect It™ functionality affords a complete collaboration solution that’s easy and affordable to...

The DM-TX-300N is a DM CAT transmitter and switcher that offers a versatile interface for computers and high-definition AV sources as part of a complete Crestron DigitalMedia system. Compact and rack-mountable, the DM-TX-300N connects to the head end or display location using a single Crestron DM cable. It provides HDMI, DVI, VGA, S/PDIF, and analog video and audio inputs, plus Ethernet, RS-232, and IR control ports for a total connectivity solution.

The DM-TX-401-C provides a versatile interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+® transmitter and switcher, providing DisplayPort, HDMI®, VGA, composite video, and analog audio inputs. It also functions as a control module, providing RS-232 and IR control ports, plus Ethernet and USB HID ports for a total connectivity solution. In addition to DM 8G+, it is also compatible with HDBaseT®, allowing it to be...

The QM-MD4X4 is a 4 x 4 QuickMedia matrix switcher designed to provide versatile routing of up to 4 inputs from QuickMedia Wall Plates and FlipTop Boxes to any of 4 QuickMedia Receivers. All signal routing is provided over in extensive CAT5e type cable* via Crestron's exclusive QuickMedia transport, supporting the distribution of high-resolution RGB, video, stereo audio and microphone signals up to a total of 450 feet end-to-end. Audio breakaway capability allows audio signals to be routed...