Accessories

The TST-600-IMCW is the interface module that is included as standard with the TST-600-DS Table Dock (and TST-600 and TST-602 Wireless Touch Screens). It provides a convenient wall or surface mounted connection point for the table dock, and is also available separately as an add-on accessory to provide multiple connection points for a single movable table dock. The table dock connects to the interface module via a 10-pin RJ50 jack.

The TST-600-SMK swivel mount kit is an optional mounting accessory for the TST-600-DS Table Dock (and TST-600 and TST-602 Wireless Touch Screens). The swivel mount provides a means of permanently mounting the docking station to a flat countertop or tabletop surface[1] while still allowing for optimal positioning. The swivel range can be customized using optional limit screws, with a maximum of 330-degree rotation allowed.

The TST-602-FP is a button bezel kit for the TST-602 Wireless Touch Screen (and TST-602-WALL Wall Mount Wireless Touch Screen). It provides custom laser text engraving of the touch screen buttons. Engraving is backlit on the black models. Custom engraving is easily attained using Crestron Engraver software. Blank models are also available to either remove all engraving or allow for custom engraving by a third party.

The TST-602-FP is a button bezel kit for the TST-602 Wireless Touch Screen (and TST-602-WALL Wall Mount Wireless Touch Screen). It provides custom laser text engraving of the touch screen buttons. Engraving is backlit on the black models. Custom engraving is easily attained using Crestron Engraver software. Blank models are also available to either remove all engraving or allow for custom engraving by a third party.

The TST-602-FP is a button bezel kit for the TST-602 Wireless Touch Screen (and TST-602-WALL Wall Mount Wireless Touch Screen). It provides custom laser text engraving of the touch screen buttons. Engraving is backlit on the black models. Custom engraving is easily attained using Crestron Engraver software. Blank models are also available to either remove all engraving or allow for custom engraving by a third party.

The TST-602-FP is a button bezel kit for the TST-602 Wireless Touch Screen (and TST-602-WALL Wall Mount Wireless Touch Screen). It provides custom laser text engraving of the touch screen buttons. Engraving is backlit on the black models. Custom engraving is easily attained using Crestron Engraver software. Blank models are also available to either remove all engraving or allow for custom engraving by a third party.

The TST-602-FP is a button bezel kit for the TST-602 Wireless Touch Screen (and TST-602-WALL Wall Mount Wireless Touch Screen). It provides custom laser text engraving of the touch screen buttons. Engraving is backlit on the black models. Custom engraving is easily attained using Crestron Engraver software. Blank models are also available to either remove all engraving or allow for custom engraving by a third party.

The TST-602-FP is a button bezel kit for the TST-602 Wireless Touch Screen (and TST-602-WALL Wall Mount Wireless Touch Screen). It provides custom laser text engraving of the touch screen buttons. Engraving is backlit on the black models. Custom engraving is easily attained using Crestron Engraver software. Blank models are also available to either remove all engraving or allow for custom engraving by a third party.

The TST-602-FP-NB is a no-button bezel kit for the TST-602 Wireless Touch Screen (and TST-602-WALL Wall Mount Wireless Touch Screen). It may be installed on the touch screen in place of the standard button bezel to provide a clean appearance with no front panel pushbuttons. One (1) TST-602-FP-NB is provided with each touch screen.

The TST-602-FP-NB is a no-button bezel kit for the TST-602 Wireless Touch Screen (and TST-602-WALL Wall Mount Wireless Touch Screen). It may be installed on the touch screen in place of the standard button bezel to provide a clean appearance with no front panel pushbuttons. One (1) TST-602-FP-NB is provided with each touch screen.

The TST-602-FP-NB is a no-button bezel kit for the TST-602 Wireless Touch Screen (and TST-602-WALL Wall Mount Wireless Touch Screen). It may be installed on the touch screen in place of the standard button bezel to provide a clean appearance with no front panel pushbuttons. One (1) TST-602-FP-NB is provided with each touch screen.

The TST-902-BTP is a replacement Lithium Ion rechargeable battery pack for The CrestronTST-902 Wireless Touch Screen. The battery pack is user replaceable.

The TST-902-DS is a stylish table dock designed for charging a single CrestronTST-902 Wireless Touch Screen while simultaneously allowing it to be used as a stationary tabletop touch screen. The table dock holds the TST-902 firmly at a fixed upright angle while docked, and allows it to be simply lifted off at any time for portable use. Its sleek appearance achieves a look befitting the most contemporary boardroom or luxury living room. One table dock is included with the TST-902, and...

The TST-902-DSW is an optional wall dock for the TST-902 Wireless Touch Screen. Placing the touch screen into the wall dock enables its use as a stationary touch screen while simultaneously charging its internal battery.When docked in the TST-902-DSW, the touch screen sits nearly flush with the outer bezel, affording a clean appearance while inhibiting unauthorized removal. By entering a passcode or pressing a button on the touch screen, the mechanism gently tilts the touch screen outward,...

The TST-902-DSW-BB provides a recess wall-mounted metal back box for the TST-902-DSW Wall Dock. Designed for pre-construction applications, the TST-902-DSW-BB permits fastening to the left or right-hand stud of a framed wall prior to installation of drywall. Conduit knockouts are provided on the top and bottom. A blank cover plate is included to provide a temporary cover of the opening during construction.

The TST-902-DSW-BBI provides a recess wall-mounted metal back box for the TST-902-DSW Wall Dock. It is designed for installation in concrete and masonry applications. Conduit knockouts are provided on the top and bottom.

The TST-902-DSW-PMK provides a simple solution for installing the TST-902-DSW Wall Dock in a typical framed wall. Designed for pre-construction applications, the TST-902-DSW-PMK permits fastening to the left or right-hand stud of a framed wall prior to installation of drywall. A blank cover plate is included to provide a temporary cover of the opening during construction.

The TST-902-DSW-WMKT provides a quick solution for installing the TST-902-DSW Wall Dock in an existing framed wall or similar flat surface. Designed for post-construction applications, the TST-902-DSW-WMKT includes a trim ring to provide a smooth edge around the cutout opening.Consult the installation manual for cutout dimensions, clearances, and complete mounting instructions.

The TST-902-DSW-WMKT provides a quick solution for installing the TST-902-DSW Wall Dock in an existing framed wall or similar flat surface. Designed for post-construction applications, the TST-902-DSW-WMKT includes a trim ring to provide a smooth edge around the cutout opening.Consult the installation manual for cutout dimensions, clearances, and complete mounting instructions.- See more at: https://www.Crestron COM/products/model/TST-902-DSW-WMKT#sthash.5o0vLHvJ.dpuf ...

Replacing an existing wall-mounted Crestron touch screen with a new TSW-750, TSW-752, TSW-1050, or TSW-1052 touch screen is simplified using a TSW-RMB Retrofit Mounting Bracket. A complete set of brackets is available to streamline the process without having to tear up or patch the wall surface. The TSW-RMB simply mounts over the existing back box, mounting kit, or cut-out to accommodate the new touch screen.

Replacing an existing wall-mounted Crestron touch screen with a new TSW-750, TSW-752, TSW-1050, or TSW-1052 touch screen is simplified using a TSW-RMB Retrofit Mounting Bracket. A complete set of brackets is available to streamline the process without having to tear up or patch the wall surface. The TSW-RMB simply mounts over the existing back box, mounting kit, or cut-out to accommodate the new touch screen.

Replacing an existing wall-mounted Crestron touch screen with a new TSW-750, TSW-752, TSW-1050, or TSW-1052 touch screen is simplified using a TSW-RMB Retrofit Mounting Bracket. A complete set of brackets is available to streamline the process without having to tear up or patch the wall surface. The TSW-RMB simply mounts over the existing back box, mounting kit, or cut-out to accommodate the new touch screen.

The TSW-1050-TTK provides a stylish and convenient tabletop enclosure for a TSW-1050 ro TSW-1052 Touch Screen. The touch screen is angled when installed in the enclosure. The complete assembly may be placed on any flat, level surface.

The TSW-1050-TTK provides a stylish and convenient tabletop enclosure for a TSW-1050 ro TSW-1052 Touch Screen. The touch screen is angled when installed in the enclosure. The complete assembly may be placed on any flat, level surface.