A rack-mountable control system with a powerful 4‑Series™ control engine, expanded memory, numerous integrated control ports and optional control card expansion slots. Features an isolated control subnet that provides a Gigabit Ethernet LAN dedicated to Crestron® devices.
Control Engine
Crestron® 4-Series™; real-time, preemptive multi-threaded/multitasking kernel; supports up to 10 simultaneously running programs
Communications
Ethernet 100/1000 Mbps, auto‑switching, auto‑negotiating, auto‑discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SNTP, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1xX, SNMP, BACnet and IP1, IPv4 or IPv6, Active Directory® service authentication, HTTPS web server, HTTPS web browser setup and XiO Cloud® client, SMTP email client
Control Subnet 100/1000 Mbps Ethernet, auto‑switching, auto‑negotiating, auto‑discovery, full/half duplex, DHCP server, DNS server, port forwarding, isolation mode, IEEE 802.3at Type 1 compliant PoE PSE
Cresnet® Network Cresnet master mode
USB Supports USB mass storage class devices via the rear panel USB 2.0 host port, supports computer console via the front panel USB 2.0 device port
RS-232/422/485 For 2-way device control and monitoring, COM port supports RS‑232 up to 115.2k baud with software handshaking, one port also supports RS‑422 or RS‑485 and hardware handshaking
IR/Serial Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0–5V) up to 115.2k baud
Memory
SDRAM 2 GB
Flash 8 GB
Memory Card Supports SD and SDHC cards up to 32 GB
External Storage Supports USB mass storage devices up to 1 TB
Connectors and Card Slots
S1–S3 (3) control card expansion slots;
Requires CAGE3 accessory (sold separately)
COM 1–2 (1) 5-pin 3.5 mm detachable terminal block;
Bidirectional RS-232/422/485 port;
Up to 115.2k baud; hardware and software handshaking support
COM 3–6 (2) 3-pin 3.5 mm detachable terminal blocks;
Bidirectional RS-232 ports;
Up to 115.2k baud; software handshaking support
IR - SERIAL OUTPUT 1–8 (2) 8-pin 3.5 mm detachable terminal blocks;
Comprises (8) IR output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0–5V) up to 115.2k baud
IRP2 IR emitters sold separately
RELAY OUTPUT 1–8 (1) 4-pin 3.5 mm detachable terminal block;
Comprises (8) normally open, isolated relays;
Rated 1A, 30VAC/VDC;
MOV arc suppression across contacts
PoE+ INPUT POWER (1) Combo D-Sub 7w2 connector, male;
54VDC power input for PoE+ power supply;
Enables PoE+ power sourcing on the CONTROL SUBNET ports
CONTROL SUBNET (4) 8‑pin RJ-45 connectors, female;
100BASE-TX/1000BASE-T Ethernet port;
PoE+ PSE (Power Sourcing Equipment) port;
Provides a dedicated local network for Crestron devices
LAN (1) 8-pin RJ45 connector, female;
100BASE-TX/1000BASE-T Ethernet port
USB (1) USB Type A connector, female;
USB 2.0 port for storage devices
MEMORY (1) SD memory card slot;
Accepts one SD or SDHC card up to 32 GB for storage of log files
I/O 1–8 (1) 9-pin 3.5 mm detachable terminal block;
Comprises (8) Versiport digital input/output or analog input ports (referenced to GND);
Digital Input: Rated for 0–24VDC, input impedance 20k Ω, logic threshold >3.125V low/0 and <1.875V high/1;
Digital Output: 250 mA sink from maximum 24VDC, catch diodes for use with real world loads;
Analog Input: Rated for 0–10VDC, protected to 24VDC maximum, input impedance 21k Ω with pull-up resistor disabled;
Programmable 5 V, 2k Ω pull-up resistor per pin
NET (1) 4-pin 3.5 mm detachable terminal block;
Cresnet master port;
Outputs power to Cresnet devices;
Alternately functions as a Cresnet power input to power the unit from a Cresnet power supply;
See "Power" section for additional specifications
100–240V~ 2.4A 50/60Hz (1) IEC 60320 C14 main power inlet;
Mates with removable power cord
G (1) 6-32 screw;
Chassis ground lug
COMPUTER (front) (1) USB Type B connector, female;
USB 2.0 computer console port;
For setup only
Controls and Indicators
PWR (1) Bicolor Green/Amber LED, indicates operating power is present;
Amber indicates that the device is booting and is not yet ready to operate;
Green indicates that the device is ready to operate
NET (1) Amber LED, indicates communication with Cresnet devices
MSG (1) Red LED, indicates control processor has generated an error message
HW-R (1) Recessed push button for hardware reset
SW-R (1) Recessed push button for software reset
CNPS FAULT (1) Red LED and (1) push button;
LED indicates an excessive Cresnet load detected at the NET port;
Push button resets the fault indication
SLOT 1–3 (3) Green LEDs, indicate control cards are inserted in the corresponding slots
LAN (rear) (1) Bicolor green/amber and (1) Amber LEDs;
Green/amber LED indicates Ethernet link status and connection speed;
Amber LED indicates Ethernet activity
CONTROL SUBNET (rear) (1) Bicolor green/amber and (1) Amber LEDs;
Green/amber LED indicates Ethernet link status and connection speed;
Amber LED indicates Ethernet activity
Power
Main Power 2.4A @ 100-240VAC, 50/60Hz
Available Cresnet Power 75W (3.125A @ 24VDC)
Power over Eternet Plus (Poe+) IEEE 802.3at compliant PoE+ PSE (Power Sourcing Equipment);
120W total power;
Each CONTROL SUBNET port supplies up to 30W to power one PoE+ (Class 4) PD (Powered Device)
Environmental
Temperature 41 to 104°F (5 to 40°C)
Humidity 10% to 90% RH (noncondensing)
Heat Dissipation 43 BTU/hr
Enclosure
Chassis Metal, black finish, vented top and sides
Faceplate Extruded metal, black finish, polycarbonate label overlay
Mounting Freestanding or 2 RU 19-in. rack-mountable (adhesive feet and rack ears included)
Dimensions
Height 3.47 in. (89 mm) without feet
Width 17.28 in. (439 mm);
19.00 in. (483 mm) with rack ears
Depth 10.11 in. (257 mm)
Weight
4.0 lb (1.9 kg)
Compliance
Regulatory Model: M201903001;
BV Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device