Crestron CI-KNX

The CI-KNX provides a bi-directional Ethernet interface to a KNX network.

It is capable of addressing and controlling up to 250 KNX/EIB objects. The CI-KNX contains a TCP/IP port for communication and Power-over-Ethernet (PoE). Easy programming using ETS (KNX/EIB) programming software makes it ideal for small EIB/KNX installations while maintaining scalability for bigger projects.

Power Requirements
Power Supply	12–24 VAC, 12–30 VDC power supply or Power-over-Ethernet (PoE) 802.3af; (Power supply sold separately)
Power Consumption	0.8 W (0.02 A @ 24 VDC)
Connectors
Power	(2) Screw terminals
LAN	(1) 8-wire RJ-45 connector; 10/100 Base-T Ethernet port (IEEE802.3af)
BUS (KNX/EIB)	(1) Wago connector; Connects to the KNX bus
Controls and Indicators
KNX LED	(1) Green LED; Lights to indicate bus voltage on KNX; Flashes to indicate telegram traffic
Ethernet LED	(1) Green LED; Lights to indicate Ethernet connection; Flashes to indicate Ethernet traffic
Programming Button	(1) Recessed pushbutton; Used to enter ETS programming mode
Programming LED	(1) Red LED; Lights when the CI-KNX is in ETS programming mode
Environmental
Temperature (operating)	-5° to 45°C (23° to 113°F)
Temperature (nonoperating)	-25° to 70°C (-13° to 158°F)
Humidity	5% to 93% RH (noncondensing)
Construction
Light gray polycarbonate housing, 35 mm DIN EN 60715 rail mount, occupies 2 DIN module spaces (36 mm)
Dimensions
Height	88 mm (3.47 in)
Width	35 mm (1.38 in)
Depth	58 mm (2.28 in)
Weight
100 g (3.5 oz)
Compliance
LVD 2006/95/EG, EMC 2004/108/EG, EN 50090-2-2:2007 (HBES), EN 61000-6-2:2005 (susceptibility), EN 6100‑6‑3:2007 (Emissions)