Price: $1,725.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: DIN-AP4

    Description

    4-Series™ DIN Rail Control System

    Specifications

    Control Engine
    Crestron® 4-Series™; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs
    Communications
    Ethernet100 Mbps, auto‑switching, auto‑negotiating, auto‑discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1xX, SNMP, BACnet and IP1, IPv4 or IPv6, Active Directory® service authentication, HTTPS web server, HTTPS web browser setup and XiO Cloud® client, SMTP email client
    Cresnet® NetworkCresnet master mode
    USBSupports USB mass storage class devices via the front panel USB 2.0 host port, supports computer console via the front panel USB 2.0 device port
    RS-232/422/485For 2-way device control and monitoring, supports RS-232, RS-422, or RS-485 up to 115.2k baud with hardware and software handshaking
    IR/SerialSupports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
    Memory
    DDR3 SDRAM1GB
    Flash8 GB
    Memory CardSupports SD and SDHC cards up to 32 GB
    External StorageSupports USB storage devices up to 1 TB
    Connectors and Card Slots
    I/O 1–8(1) 9-pin 3.5 mm detachable terminal block;
    Comprises (8) Versiport digital input/output or analog input ports (referenced to GND);
    Digital Input: Rated for 0–24 VDC, input impedance 20k Ω, logic threshold >3.125 V low/0 and <1.875 V high/1;
    Digital Output: 250 mA sink from maximum 24 VDC, catch diodes for use with real world loads;
    Analog Input: Rated for 0–10 VDC, protected to 24 VDC maximum, input impedance 21k Ω with pull-up resistor disabled;
    Programmable 5 V, 2k Ω pull-up resistor per pin
    MEMORY(1) SD memory card slot;
    Accepts one SD or SDHC card up to 32 GB for storage of log files
    IR/SERIAL 1–4(1) 8-pin 3.5 mm detachable terminal block;
    Comprises (4) IR output ports;
    IR output up to 1.2 MHz;
    1-way serial TTL/RS-232 (0–5 V) up to 115.2k baud;
    IRP2 IR emitters sold separately
    RELAYS 1–4(1) 8-pin 3.5 mm detachable terminal block;
    Comprises (4) normally open, isolated relays;
    Rated 1 A, 30 VAC/VDC;
    MOV arc suppression across contacts
    COMPUTER(1) USB Type B connector, female;
    USB 2.0 computer console port;
    For setup only
    PWR(1) 2-pin 3.5 mm detachable terminal block;
    24 VDC power input for power pack (sold separately)
    NET(2) 4-pin 3.5 mm detachable terminal blocks, paralleled;
    Cresnet master port
    COM 1–2(2) 5-pin 3.5 mm detachable terminal blocks;
    Bidirectional RS‑232/422/485 port;
    Up to 115.2k baud; hardware and software handshaking support
    G(1) 6-32 screw;
    Chassis ground lug
    USB(1) USB Type A connector, female;
    USB 2.0 port for storage devices
    LAN PoE(1) 8-pin RJ-45 connector, female;
    100BASE-T Ethernet port;
    PoE (Power over Ethernet) PD (Powered Device) port
    Controls and Indicators
    PWR(1) Bicolor green/amber LED, indicates operating power is present;
    Amber indicates that the device is booting and is not yet ready to operate;
    Green indicates that the device is ready to operate
    NET(1) Amber LED, indicates communication with Cresnet devices
    MSG(1) Red LED, indicates processor has generated an error message
    HW-R(1) Recessed miniature push button, initiates hardware reset
    SW-R(1) Recessed miniature push button, initiates software reset
    LAN(1) Green and (1) Amber LEDs;
    Green LED indicates Ethernet link status and connection speed;
    Amber LED indicates Ethernet activity
    Power
    Power Source OptionsPower pack (sold separately) or PoE
    Power PackMust supply 24 VDC to 2-pin terminal block via flying leads;
    Use model PW-2407WUL or equivalent
    Power over EthernetIEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95 W) PoE Powered Device
    Available Cresnet Power2.5 W maximum via PoE;
    10 W maximum via 0.75 @ 24 VDC power pack
    Power Consumption9.7 W (not including any connected Cresnet devices)
    Environmental
    Temperature41 to 113 °F (5 to 45 °C)
    Humidity10% to 90% RH (noncondensing)
    Heat Dissipation33 BTU/hr
    Enclosure
    Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 9 DIN module spaces (162 mm)
    Dimensions
    Height3.57 in (91 mm)
    Width6.33 in (161 mm)
    Depth2.28 in (58 mm)
    Weight
    9.8 oz (277 g)

    Additional Information

    Provides a control system with a powerful 4‑Series™ control engine and numerous integrated control ports designed specifically for DIN rail mounting applications. Serves as the core processor for controlling a complete DIN rail automation system.