Home > Automation > Converters & Extenders >
  • Crestron HD-RXC-101-C-1G-E-B-T - HD-RXC-101-C-1G-E-B-T
  • Crestron HD-RXC-101-C-1G-E-B-T - HD-RXC-101-C-1G-E-B-T

Crestron HD-RXC-101-C-1G-E-B-T

There are no reviews yet. | Write a review

DM Lite – HDMI® over CATx Receiver w/IR & RS-232, Wall Plate, Black Textured

Pairs with a DM Lite transmitter to provide a simple point-to-point signal extender for HDMI® signals up to UHD and 4K, plus RS-232 and IR.
Price: $529.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: HD-RXC-101-C-1G-E-B-T

    Description

    The HD-RXC-101-C-1G-E-B-T is a wall plate DM Lite receiver designed to pair with a DM Lite transmitter to form a point-to-point signal extender for HDMI®, RS-232, and IR signals. The DM Lite family of products offers a very simple and versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or better) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K. In addition to video and audio, the HD-RXC-101-C-E supports the extension of RS-232 and IR control signals in either direction.[1]

    For applications requiring a surface mount version, refer to the HD-RXC-101-C-E.
    For applications that do not require IR or RS-232 signal extension, refer to the HD-RX-101-C-1G-E-B-T.

    The HD-RXC-101-C-1G-E-B-T is designed to mount in a single-gang electrical box or plaster ring (not included). It is normally powered by the transmitter over the link cable when using a surface mount transmitter. If using a wall plate transmitter, a single power pack must be purchased (sold separately, model TBA), which may be connected to either the receiver or transmitter.[2]

    Important: This product is not addressable from a control system and offers no programmable functionality. AV, CEC, IR, and RS-232 signals are simply passed through between a single transmitter and receiver pair. The RJ45 link port on this product is exclusively intended for linking with a single DM Lite transmitter. It should not be used to connect to any other equipment or network. DM Lite is not compatible with PoE, PoDM, DigitalMedia 8G+® (DM 8G+®), or HDBaseT®.

    Key Features
    • Pairs with a DM Lite transmitter to provide a simple point-to-point signal extender
    • Enables extension of HDMI®, RS-232, and IR signals
    • Links to the transmitter via a single CAT5e (or better) twisted pair cable[1]
    • Supports 4K and UHD at up to 130 ft (40 m)
    • Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m)
    • Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
    • Handles 3D video and Deep Color
    • Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
    • Compatible with HDMI and DVI display devices[3]
    • HDCP 2.2 compliant
    • Passes CEC and EDID signals
    • Extends bidirectional RS-232 and IR control signals
    • Flush wall mount design
    • Installs in a single-gang U.S. electrical box (2-1/4” deep) or plaster ring
    • Decorator style faceplates sold separately
    • Normally powered by the transmitter (surface mount) over the link cable[2]
    • Universal 100-240V power pack available separately (coming soon) for use with a wall plate transmitter[2]

    Specifications

    Video
    Output Signal TypeHDMI w/Deep Color, 3D, & 4K (DVI compatible [3])
    Copy ProtectionHDCP 2.2

    Maximum Resolutions

    Scan
    Type    		ResolutionFrame
    Rate    		Color
    Sampling    		Color
    Depth
    Progressive4096x2160 DCI 4K
    &
    3840x2160 4K UHD    		24 Hz4:4:430 bit
    30 Hz4:4:424 bit
    30 Hz4:2:236 bit
    60 Hz4:2:024 bit
    2560x1600 WQXGA60 Hz4:4:436 bit
    1920x1080 HD 1080p60 Hz4:4:436 bit
    Interlaced1920x1080 HD 1080i30 Hz4:4:436 bit

    NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
    Audio
    Output Signal TypeHDMI
    FormatsDolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels
    Communications
    HDMIHDCP 2.2, EDID, CEC pass-through
    RS-2322-way serial pass-through up to 115.2k baud (TD/RD only)
    IRBidirectional IR signal pass-through up to 60 kHz
    DM Lite LinkProprietary link for connection between one DM Lite TX & RX only
    Connectors
    IR IN/OUT(1) 4-pin 3.5 mm detachable terminal block;
    Comprises (1) IR input port and (1) IR output port;
    IR IN is for connection from a Crestron IR control port or other IR signal source and passes the IR input signal to the IR OUT port on the TX;
    IR OUT is for connection to an IR emitter (IRP2, sold separately) and transmits the IR signal from the IR IN port on the TX;
    Supports IR up to 60 kHz
    HDMI OUT(1) HDMI Type A connector, female;
    HDMI digital video/audio output (DVI compatible [3])
    COM(1) 3-pin 3.5 mm detachable terminal block;
    Bidirectional RS-232 port;
    Passes RS-232 TD/RD data to/from the COM port on the TX;
    Supports up to 115.2k baud
    FROM TX (rear)(1) 8-pin RJ45 connector, female, shielded;
    Link port for connection to a DM Lite transmitter [1]
    24VDC 1.25A (rear)(1) 2-pin 3.5 mm detachable terminal block;
    24 Volt DC power input;
    Power pack sold separately (if required, model TBA) [2];
    Note: This connection powers both the receiver and transmitter; this connection is not normally used when pairing with a surface mount transmitter.[2]
    Indicators
    PWR(1) Green LED, indicates operating power is supplied from the TX via the DM Lite link or from a power pack via the 24VDC input
    HDMI OUT(1) Green LED, indicates HDMI output signal presence
    FROM TX(2) LEDs (on RJ45 connector), green LED indicates link status, amber LED indicates a valid video signal
    Power
    Power Pack (sold separately)Input: 100-240 Volts AC, 50/60 Hz;
    Output: 1.25 Amps @ 24 Volts DC;
    Model: TBA
    Note: This power pack is only required when pairing with a wall plate transmitter. When pairing with a surface mount transmitter, use the power pack supplied with that transmitter. The receiver and transmitter are powered together using a single power pack connected at either the receiver or transmitter (not both).[2]
    Environmental
    Temperature32° to 104° F (0° to 40° C)
    Humidity20% to 90% RH (non-condensing)
    Construction
    CompositionMetal housing and bracket with black polycarbonate front label overlay
    MountingMounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included)
    FaceplateRequires a decorator-style faceplate (FP-G series, sold separately)
    Dimensions
    Height4.08 in (104 mm)
    Width1.81 in (46 mm)
    Depth1.97 in (50 mm)
    Weight
    5.26 oz (149 g)
    Compliance
    UL Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device
    Maximum DM Lite Link Cable Lengths


    Resolution    		Cable Type
    CAT5e (or better),
    DM-CBL-ULTRA DM® Ultra Cable, or
    DM-CBL-8G DM 8G DM 8G® Cable [1]
    1920x1080 FHD 1080p230 ft (70 m)
    1920x1200 WUXGA
    1600x1200 UXGA
    2048x1080 DCI 2K
    2048x1152 QWXGA
    2560x1080 UWFHD130 ft (40 m)
    2560x1440 WQHD
    2560x1600 WQXGA
    3840x2160 4K UHD
    4096x2160 DCI 4K