Power Requirements
120 VAC, 50/60 Hz;
Requires neutral wire connection
Controls
Pushbutton (1) large rocker button (HZ‑BTN‑RKR5‑BLANK) preinstalled;
Configurable with combinations of HZ‑BTN‑RKR1, HZ‑BTN‑RKR3, or HZ‑BTN‑1 in blank or engraved models1
Airgap (1) switch at the bottom of the device;
Controls power to the device and connected loads
Setup (1) Hidden pushbutton (behind faceplate's top trim piece);
Configures the LED backlight and calibrates the light sensor
LED Indicator and Light Sensor
Feedback (5) Color‑adjustable LEDs;
Provides button backlighting
Light Sensor
Photosensor with adjustable sensitivity;
Detects the ambient light level to activate day or night mode
NOTE: Light sensor performance may be affected by obstructions placed below the keypad.
NOTE: Light sensor performance may be affected by obstructions placed below the keypad.
Wireless
RF Transceiver infiNET EX® 2‑way RF, 2.4 GHz ISM Channels 11‑26 (2400 to 2483.5 MHz), default channel 15;
IEEE 802.15.4 compliant
Range (typical) 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s);
Subject to site-specific conditions and individual device capabilities1
Gateway Requires an infiNET EX gateway2
Connections
Line (1) 14‑12 AWG, screw terminal, brass, line power input
Neutral (1) 14‑12 AWG, screw terminal, silver, neutral
Remote (1) 14‑12 AWG, screw terminal, blue, remote
Ground (1) 14‑12 AWG Class 1 flying lead, green, ground (wire nut included)
Environmental
Temperature 32° to 86° F (0° to 30° C)
Humidity 10% to 90% RH (noncondensing)
Enclosure
Mounting Mounts in a 1‑gang U.S. electrical box or plaster ring (not included);
3.5 in. (26 mm) electrical box depth recommended;
Gangable up to four units
Faceplate Requires an HZ‑FP‑G Horizon faceplate (not included)
Dimensions
Height 4.38 in. (112 mm)
Width 1.80 in. (46 mm)
Depth 1.75 in. (45 mm) overall, extends 0.41 in. (11 mm) from wall surface when installed
Weight
6.6 oz (187 g)
The HZ‑KPEX is a Horizon™ in‑wall keypad that features field‑replaceable and engravable LED backlit buttons. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations.
Multiway Dimming and Switching
Similar to traditional three‑ or four‑way circuits, the HZ‑KPEX lets you control the lights from multiple locations using the traveler wire.1 Up to four devices can be connected to a single dimmer or switch. The HZ‑KPEX provides local LED feedback for the status of the load connected to the master load controller along with backlit, engravable button caps to mimic the familiar feel of other Horizon products. The multiway controller provides instant usability upon installation without the need for programming.
Multigang Expansion
Up to four devices may be installed side‑by‑side in a multigang electrical box with a compatible Horizon faceplate (HZ‑FP‑G series).2 All buttons in a multigang arrangement align to form one continuous control surface.
infiNET EX Communications
infiNET EX wireless technology provides two‑way RF communications throughout a residential or commercial structure without the need for physical control wiring. Each infiNET EX device acts as an expander by sending command signals to other infiNET EX devices in range (approximately 150 ft (46 m) indoors) to ensure reliability and stability.1
The HZ‑KPEX communicates with a control system via a CEN‑GWEXER2 or newer infiNET EX Wireless Gateway. Up to 100 infiNET EX devices may coexist on a wireless network.
Field-Replaceable Button Caps
The preinstalled five button caps on the HZ‑KPEX are field replaceable, allowing for various engravable button configurations.
Multicolor Backlit Button Engraving
Horizon keypad buttons are laser engravable to identify each button's function. RGB LED backlights illuminate the engraved labels and can be adjusted for custom color backlighting. A built‑in ambient light sensor enables auto‑dimming of the backlight brightness according to day and night mode presets.
Each button's backlight provides feedback by changing color, intensity, or both. The backlight can also flash to show that an action is being performed.
Customizable Faceplates
Horizon compatible faceplates are customizable for any décor. Color‑matched top and bottom trim pieces may be swapped easily after installation with custom trim fabricated from solid materials such as wood, metal, marble, engineered stone, or Corian®. Contact a Crestron representative, or refer to Crestron True Blue Support Online Help Answer ID: 1000140, to obtain specifications and CADs for the fabrication of custom trim. Paintable trim is also available separately.
Note: The faceplate trim is attached magnetically, which may inhibit use in locations where tampering may occur.
Key Features
Can act as a multiway controller for a connected dimmer or switch (HZ‑DIMEX, HZ‑DIMUEX, and HZ‑SWEX)
Line based multiway control for reliability across all load types
Single‑gang U.S. wall box installation
Requires neutral wire connection
Gangable up to four across using Crestron® Horizon™ device compatible multi‑gang faceplates (HZ‑FP‑G series)
Robust infiNET EX® wireless communication
Configurable with up to five field‑replaceable buttons
Custom backlit laser‑etched engravable buttons
Multicolor RGB LED backlighting
Auto‑dimming day/night backlight modes
Local button for load control without programming
Fully programmable via a Crestron control system
Crestron Home™ OS 3 compatible
The HZ‑KPEX cannot be used to control a load directly. It must be used in conjunction with a HZ‑DIMEX, HZ‑DIMUEX, or HZ‑SWEX.