Crestron TSW-560-LB-B

Adds 180° visual indication of room availability to a TSW-560, TSW-560P, or TSW-560-NC series touch screen.

The TSW-560-LB Series light bar is an add-on accessory for a TSW-560, TSW-560P, or TSW-560-NC series touch screen to provide 180° visual indication of the room availability status. With just a glance down the hallway, the light bar provides highly-visible indication of a room’s availability as part of a complete Crestron® enterprise room scheduling solution. It mounts to the rear of the touch screen and provides a ring of light around the perimeter of the touch screen. Its clean, stylish appearance and vivid color illumination complement any corporate office environment.

Room Availability Status
For room scheduling applications, the TSW-560-LB requires no special programming or configuration. The color of illumination is controlled by the room scheduling application, which runs on the touch screen and syncs with the Crestron Fusion® Enterprise Management Service or other supported calendaring application. It illuminates green when the room is available and red when the room is occupied. It can also blink to indicate an emergency message broadcast from Crestron Fusion.

Custom RGB Color Mixing
For custom applications, the TSW-560-LB can be programmed to illuminate in any desired color. Its tricolor RGB LEDs allow for a full spectrum of colors by blending the red, green, and blue elements in 1% increments per color. Custom RGB color mixing is performed through programming of the Crestron control system controlling the touch screen. The control system can be programmed to support all types of functionality, enabling colors to alternate, fade in and out, or blink on and off as desired.

Indicator
Illumination	RGB LED
Functionality	Supports alternating red/green indication of room availability status for room scheduling; supports RGB color mixing via custom control system programming
Communications
USB	USB 2.0 device for connection to a TSW-560, TSW-560P, or TSW-560,NC series touch screen
Connectors
USB	(1) Attached lead with USB Type A connector, male; USB 2.0 device port [1]; Connects to the USB host port on the touch screen
Flex Circuit Slot	Attaches the light bar panel to the control module
Power
USB Power	2.5 Watts
Power Consumption	1.3 Watts typical
Environmental
Temperature	41 to 113 °F (5 to 45 °C)
Humidity	10% to 90% RH (non-condensing)
Heat Dissipation	5 BTU/hr
Construction
Composition	Two-piece assembly composed of a control module and light-diffusing plastic light bar panel
Mounting	Control module attaches to the rear of the touch screen using screws, light bar panel sandwiches between the touch screen and mounting surface, 2-13/16 in. (72 mm) minimum mounting depth, compatible with TSW-UMB-60-PMK preconstruction mounting kit, TSW-UMB-60-BBI wall mount back box, and TS-5-MSMK multisurface mount kit (not compatible with the TSW-560-TTK series tabletop kit or TSW-560/760-RMK-1 rack mount kit)
Dimensions
Height	3.48 in. (89 mm)
Width	6.06 in. (154 mm)
Depth	0.59 in. (15 mm)
Dimensions shown are for the complete touch screen and light bar assembly; projects 0.6 inch (15 mm) from the mounting surface
Weight
2.26 oz (64 g)
Compliance
CE, IC, FCC Part 15 Class B digital device