Home > Automation >

Crestron DIN-SACN-DMX

There are no reviews yet. | Write a review

ENTTEC DIN-ODE POE Mk2 – Ethernet to DMX Converter

Simplifies integration between a Crestron® 3-Series® lighting control system and any DMX lighting fixture or controller. Enables distribution of DMX over Ethernet or Wi-Fi® via sACN, Art-Net, or ESP.
Price: $1,380.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: DIN-SACN-DMX

    Description

    The ENTTEC DIN-ODE POE Mk2 (sold by Crestron® as model DIN-SACN-DMX) is a cost-effective and reliable Ethernet to DMX convertor. It supports sACN, Art-Net, and ESP protocols, and is designed to enable integration between DMX and network controllable lighting devices and systems. As part of a Crestron architectural lighting system, it allows a 3-Series® control processor to communicate via sACN with any DMX lighting fixture or controller.

    Key Features
    • Converts between DMX512A and sACN, Art-Net, or ESP protocols
    • Enables distribution of DMX over Ethernet or Wi-Fi®
    • Enables Crestron® control of DMX lighting fixtures and systems
    • Supports a single universe Ethernet to DMX node in output mode
    • Supports a single universe DMX to Ethernet node in input mode
    • Supports broadcast or unicast (unicast in input mode only)
    • Supports HTP/LTP merging of up to 2 DMX sources (output mode only)
    • Supports RDM over Art-Net
    • Easy web browser based setup and firmware update
    • 4U 35 mm DIN rail mountable
    • PoE or 7-24 Volt DC powered (power supply not included)

    Specifications

    Protocols
    EthernetsACN, Art-Net 3, ESP, RDM
    DMXDMX512A
    Connectors
    OUTPUT(1) 3-pin 3.5 mm detachable terminal block;
    DMX output or input
    DC POWER INPUTS(1) 2.1 x 5.5 mm DC power connector and (1) 2-pin 3.5 mm detachable terminal block;
    7-24 Volts DC power input
    LAN PoE(1) 8-pin RJ45 connector, female;
    10Base-T/100Base-TX Ethernet LAN port
    Indicators
    STAT(1) LED, indicates operational status
    DIR(1) LED, indicates DMX port is in Output mode
    LINK(1) LED, indicates Ethernet link status
    ACT(1) LED, indicates Ethernet activity
    Termination(1) DIP switch (behind cover) for DMX bus termination
    Power
    DC Power300 mA nominal (1 Amp maximum) @ 7 to 24 Volts DC;
    Power supply not included
    Power over EthernetIEEE 802.3at Type 1 (802.3af compatible) PoE Powered Device
    Environmental
    Temperature32° to 122° F (0° to 50° C)
    For indoor use only
    Construction
    HousingAluminum
    Mounting35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 4 DIN module spaces (72 mm)
    Dimensions
    Height4.21 in (107 mm)
    Width2.71 in (69 mm)
    Depth2.24 in (57 mm)
    Weight
    7.41 oz (210 g)