Home > Automation >

Crestron DMB-4K-CPU-64

There are no reviews yet. | Write a review

CPU Blade for DM-MD64X64

Provides a backup replacement CPU blade for a DM-MD64X64 DigitalMedia™ Switcher. Offers an upgrade to previous model DMB-CPU-64 to enable video preview monitoring of 4K sources, a dedicated Dante® audio networking port, faster boot times, and overall improved performance.
Price: $5,750.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: DMB-4K-CPU-64

    Description

    A DMB-4K-CPU-64 CPU blade is included with every DM-MD64X64 DigitalMedia™ Switcher. It may also be purchased separately to provide a backup replacement or as an upgrade to an older CPU blade. Replacement of the CPU blade can be performed on site without requiring any tools and without removing the switcher from the equipment rack. Replacement takes just seconds, although a system reboot may be required to activate the new CPU.


    The DMB-4K-CPU-64 features several enhancements over its predecessor, model DMB-CPU-64 . Enhancements include support for video preview monitoring of 4K and Ultra HD sources on the switcher’s front panel touch screen, a dedicated Dante® audio network port[1], a USB service port, and a more powerful processor for faster boot times, improved touch screen and web UI response, and increased throughput for endpoint control signals. No programming changes are required when upgrading from an older CPU blade.

    The DMB-4K-CPU-64 includes an analog line-level audio output, which can be used to feed an external stereo amplifier and speakers for local audio monitoring. Built-in surround sound decoding and downmixing allows multichannel audio sources to be monitored. Volume and mute controls for this output are provided via the switcher’s front panel touch screen or a web browser.

    Key Features
    • A CPU blade replacement or upgrade for DM-MD64x64 DM® Switchers
    • More powerful processor for improved performance and faster boot times
    • Enables video preview monitoring of 4K and Ultra HD sources
    • Dedicated Dante® audio networking port [1]
    • Stereo line-level audio monitoring output with surround sound downmixing
    • USB port for configuration save/load and firmware update via flash drive
    • No programming changes required when upgrading from an older CPU blade

    Specifications

    Communications
    Ethernet10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, Private Network Mode, HTTPS web browser setup and control, Crestron control system integration
    DanteDante network interface via LAN port or dedicated DANTE port [1]
    USBUSB 2.0 host for USB mass storage devices, supports save/load of configuration and EDID settings, supports firmware update
    Video
    Preview Scaler(1) 4K video scaler for switcher’s front panel preview monitor, motion-adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion, content-adaptive noise reduction
    Maximum Source Resolutions
    Scan
    Type    		ResolutionFrame
    Rate    		Color
    Sampling    		Color
    Depth
    Progressive4096x2160 DCI 4K
    &
    3840x2160 4K UHD    		24 Hz4:4:430 bit
    30 Hz4:4:424 bit
    30 Hz4:2:236 bit
    60 Hz4:2:024 bit
    2560x1600 WQXGA60 Hz4:4:436 bit
    1920x1080 HD 1080p60 Hz4:4:436 bit
    Interlaced1920x1080 HD 1080i30 Hz4:4:436 bit
    NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
    Audio
    Input Signal TypesDante [1]
    Output Signal TypesDante [1], analog stereo for local monitoring
    Dante I/OUp to 120 stereo channels in and/or out at up to 24-bit 48 kHz [1]
    Analog Output Downmix DecodingDolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS HD Master Audio, DTS-X®, LPCM up to 8 channels
    Digital-To-Analog Conversion24-bit 48 kHz
    Analog Volume Adjustment-80 to 0 dB plus mute, adjustable via switcher’s front panel touch screen or web browser
    Connectors
    LAN(1) 8-pin RJ45 connector, shielded, female;
    10Base-T/100Base-TX/1000Base-T Ethernet LAN port
    DANTE(1) 8-pin RJ45 connector, shielded, female;
    1000Base-T Dante network port [1]
    USB(1) USB Type A connector, female;
    USB 2.0 host port for connection of a USB flash drive;
    For save/load of configuration and EDID settings and for firmware update
    AUDIO OUT(1) 5-pin 3.5mm detachable terminal block;
    Balanced/unbalanced stereo line-level output for local monitoring;
    Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
    Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
    Controls & Indicators
    ACT(1) Green LED, indicates CPU activity
    MSG(1) Red LED, indicates CPU has generated an error message
    CPU RESET(1) Recessed pushbutton, reboots the CPU and front panel
    LAN(2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
    DANTE(2) LEDs, green LED indicates Dante network link status, amber LED indicates Dante network activity
    Construction
    Plug-in blade, occupies the CPU blade slot of a DM-MD64X64 switcher, includes metal faceplate w/black finish
    Weight
    1.6 lb (726 g)
    Compliance
    CE, IC, FCC Part 15 Class B digital device