Operating System |
| Crestron 3-Series; real-time, preemptive, multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs; preloaded DMPS3 .AV Framework Base Program |
Memory |
| SDRAM | 512 MB |
| Flash | 4 GB |
Communications |
| Ethernet | 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet™/IP [10], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client, RSTP, Private Network Mode |
| Control Subnet | 10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode, IEEE 802.3at Type 1 compliant PoE PSE |
| AirMedia [1] | (Via Ethernet) 10/100 Mbps, IPv4, DHCP, TLS, AES, mDNS, HTTPS web server |
| Streaming | (Via Ethernet) 10/100 Mbps, DHCP, H.264 decoding, MJPEG decoding, HDCP 2.2, RTP, RTSP, SDP |
| Cresnet | Cresnet master mode |
| USB | USB signal routing via select DM transmitters and receivers, or via USB-EXT-DM series extenders [9]; USB device port for computer console (setup) |
| RS-232 | 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking |
| IR/Serial | 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; supports CNXRMIRD IR Receiver [6] |
| DigitalMedia | DM 8G+, HDCP 2.2, EDID, CEC, PoDM+ [8], Ethernet |
| HDBaseT | HDCP 2.2, EDID, CEC, RS-232, PoE+ [8], Ethernet |
| HDMI | HDCP 2.2, EDID, CEC |
| NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI and HDBaseT devices and the control system |
Video |
| Switcher | 9x4 matrix, Crestron QuickSwitch HD technology |
| Scalers (HDMI outputs) | (2) 4K video scalers with motion-adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion [5], content-adaptive noise reduction, and widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1) |
| Input Signal Types | HDMI w/Deep Color, 3D [5], & 4K (DVI & Dual-Mode DisplayPort compatible [4]) on Inputs 1-6; DM 8G+ & HDBaseT w/Deep Color, 3D [5], & 4K on Inputs 7 & 8; streaming & AirMedia on Input 9 (LAN) |
| Output Signal Types | HDMI w/Deep Color & 4K (DVI compatible [4]) on Outputs 1 & 2; DM 8G+ & HDBaseT w/Deep Color, 3D, & 4K on Outputs 3 & 4 |
| Maximum Resolutions |
| Scan Type | Resolution | Frame Rate | Color Sampling | Color Depth |
---|
Progressive | 4096x2160 DCI 4K & 3840x2160 4K UHD | 24 Hz | 4:4:4 | 30 bit | 30 Hz | 4:4:4 | 24 bit | 30 Hz | 4:2:2 | 36 bit | 60 Hz | 4:2:0 | 24 bit | 2560x1600 WQXGA | 60 Hz | 4:4:4 | 36 bit | 1920x1080 HD 1080p | 60 Hz | 4:4:4 | 36 bit | Interlaced (excluded on HDMI outputs) | 1920x1080 HD 1080i | 30 Hz | 4:4:4 | 36 bit |
|
| NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz. Interlaced video is not supported on the HDMI outputs. |
Streaming Decoder |
| Video Formats | H.264 (MPEG-4 part 10 AVC), MJPEG |
| Audio Format | AAC stereo |
| Bitrates | Up to 25 Mbps |
| Resolutions | Up to 1080p60 |
AirMedia [1] |
| Users | Supports up to 32 users (presentation device connections) |
| Client Software OS Support | Windows 7, Windows 8, Window 10, Mac® OS X® (versions 10.10 through 10.13) |
| Client Software Video Frame Rate | 30 fps, audio supported |
| Mobile App OS Support | Apple® iOS, Android |
| Full Screen Device Mirroring | Shares the screen image and audio from an Apple iOS, Android, Mac OS X, or Windows device |
| Resolutions | 800x600@60Hz, 1024x768@60Hz, 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1920x1080@60Hz (1080p60), 1920x1200@60Hz |
| Audio Format | Stereo |
Audio – General |
| Switcher/Mixer | 14x5 stereo source matrix switcher, digital & analog source inputs, streaming & AirMedia source input, 6-channel gated mic mixer w/DSP, independent mixer per analog output (6-ch mic + 1 stereo source), independent stereo DSP per analog output, integrated power amplifier, two independent digital output mixers (6-ch mic + 1 stereo source), 2x1 digital output mix selector per digital output |
| Analog-To-Digital Conversion | 24-bit 48 kHz |
| Digital-To-Analog Conversion | 24-bit 48 kHz |
| Frequency Response, Digital & Analog Line Outputs | 20 Hz to 20 kHz ±0.5 dB (digital source); 20 Hz to 20 kHz ±0.5 dB (analog line source); 20 Hz to 20 kHz ±0.7 dB (microphone source) |
| Frequency Response, Speaker Output | 20 Hz to 20 kHz ±1 dB @ 25 Watts into 8 Ohms; 100 Hz to 20 kHz ±2.5 dB @ 70 or 100 Volts |
| S/N Ratio, Digital & Analog Line Outputs | >108 dB, 1 kHz, A-weighted (digital source); >103 dB, 1 kHz, A-weighted (analog line source) |
| S/N Ratio, Speaker Output | 98 dB @ 25 Watts into 8 Ohms, 1 kHz, A-weighted; 96 dB @ 25 Watts into 4 Ohms, 1 kHz, A-weighted |
| THD+N, Digital & Analog Line Outputs | <0.002%, 20 Hz to 20 kHz (digital source); <0.005%, 20 Hz to 20 kHz (analog line source); <0.05%, 20 Hz to 20 kHz (microphone source) |
| THD+N, Speaker Output | <0.1%, 1 kHz @ 25 Watts into 4 or 8 Ohms; <0.7%, 20 Hz to 20 kHz @ 25 Watts into 4 or 8 Ohms |
| Stereo Separation, Digital & Analog Line Outputs | >108 dB (digital source); >103 dB (analog source) |
| Stereo Separation, Speaker Output | >65 dB @ 25 Watts, 1 kHz |
| Channel Separation, Digital Outputs | >108 dB (digital source); >103 dB (analog source) |
| Channel Separation, Analog Line Outputs | >103 dB |
| Speaker Output Modes | 4Ω/8Ω stereo, 70V mono, or 100V mono |
| Speaker Amplifier Output Power | 25 Watts RMS per channel @ 8 Ohms, 4 Ohms tolerant; 50 Watts RMS @ 70 or 100 Volts |
Audio – Microphone Inputs |
| Typical of 6 microphone input channels (Mic/Line 1 – 6) |
| Input Signal Types | Mono analog mic or line level |
| Phantom Power | Enable/Disable per channel |
| Gain | 0 to +60 dB Gain adjustment in 3 dB increments, plus Mute |
| Delay | 0.0 to 85.0 ms |
| EQ Center Frequencies | 50 to 200 Hz (Band 1), 200 to 800 Hz (Band 2), 800 to 3.2k Hz (Band 3), 3.2k to 12.8k Hz (Band 4) |
| EQ Gain | ±12.0 dB per band |
| High-Pass Filter | On or Off |
| Gating Threshold | -80 to 0 dB |
| Gating Depth (Attenuation) | -80 to 0 dB |
| Gating Attack | 1 to 250 ms |
| Gating Release | 1 to 1000 ms |
| Compression Threshold | -80 to 0 dB |
| Compression Ratio | 1:1 to 10:1 |
| Compression Attack | 1 to 250 ms |
| Compression Release | 1 to 1000 ms |
| Compression Curve | Hard or soft knee |
Audio – Source Inputs |
| Input Signal Types | HDMI (Dual-Mode DisplayPort compatible [4]) on Inputs 1-6, DM 8G+ & HDBaseT on Inputs 7 & 8, streaming & AirMedia on Input 9 (LAN), analog 2-channel on Aud In 1-5 |
| Analog Formats | Stereo 2-channel |
| Digital Formats | 2-channel LPCM |
| Input Compensation | ±10.0 dB, adjustable per input |
Audio – Analog Line & Speaker Outputs |
| Typical of 1 analog line/speaker output (Program Out & Speaker Outputs) and 2 analog line outputs (Aux Out 1 – 2) |
| Output Signal Type/Format | Stereo 2-channel |
| Mic 1 – 6 | -80 to +10 dB Level adjustment range, plus Mute and Pan |
| Mics Master | -80 to +10 dB Level adjustment range, plus Mute |
| Source | -80 to +10 dB Level adjustment range, plus Mute and Balance |
| Master Volume | -80 to +10 dB Level adjustment range, plus Mute and Mono |
| Mixer Presets | 1 through 5 |
| Bass | ±12.0 dB |
| Treble | ±12.0 dB |
| Equalization | 10-band graphic + 4-band parametric |
| GEQ Center Frequencies | 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz |
| GEQ Gain | ±12.0 dB per band |
| PEQ Center Frequencies | 10 to 22000 Hz per band |
| PEQ Gain | -36.0 to +24.0 dB per band |
| PEQ Bandwidth | 0.02 to 3.50 octaves per band |
| PEQ Types | Peaking EQ, High Pass, Low Pass, High Shelf, Low Shelf, Notch |
| Delay | 0.0 to 85.0 ms |
| Limiter Threshold | -80 to 0 dB |
| Limiter Ratio | 1:1 to 10:1 |
| Limiter Attack | 1 to 250 ms |
| Limiter Hold | 1 to 200 ms |
| Limiter Release | 1 to 1000 ms |
| Limiter Curve | Hard or soft knee |
| EQ Presets | 1 through 10 (includes Delay and Limiter settings) |
Audio – Digital Outputs |
| Typical of 4 digital outputs (HDMI Output 1 – 2 & DM Output 3 – 4) |
| Output Signal Types | HDMI (DVI compatible [4]) on Outputs 1 & 2, DM 8G+ & HDBaseT on Outputs 3 & 4 |
| Formats | 2-channel LPCM |
| Digital Output Mix Select 1 – 2 | Selects which mix is routed to the corresponding output |
| Typical of 2 digital output mixers: |
| Mic 1 – 6 | -80 to +10 dB Level adjustment range, plus Mute and Pan |
| Mics Master | -80 to +10 dB Level adjustment range, plus Mute |
| Source | -80 to +10 dB Level adjustment range, plus Mute and Balance |
| Master Volume | -80 to +10 dB Level adjustment range, plus Mute |
| Mixer Presets | 1 through 5 |
Connectors – Audio/Video Inputs |
| AUD IN 1 – 5 | (5) 5-pin 3.5 mm detachable terminal blocks; Balanced/unbalanced stereo line-level analog audio inputs; Input Impedance: 24k Ohms balanced/unbalanced; Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced |
| MC1/LN1 – MC6/LN6 | (6) 5-pin 3.5 mm detachable terminal blocks; Comprises (6) balanced microphone/line audio inputs; Balanced Mic Input Level: -60 to 0 dBV, 1 Vrms maximum; Balanced Line Input Level: -31 to +11 dBV, 3.7 Vrms maximum; Unbalanced Line Input Level: -37 to +5 dBV, 1.85 Vrms maximum; Mic Input Impedance: 3.9k Ohms balanced; Line Input Impedance: 19k Ohms balanced, 9.5k Ohms unbalanced; Phantom Power: 48 Volts DC, software enabled/disabled per channel |
| HDMI 1 – 6 INPUTS | (6) HDMI Type A connectors, female; Digital video/audio inputs; (DVI and Dual-Mode DisplayPort compatible [4]) |
| DM INPUT 7 – 8 | (2) 8-pin RJ45 connectors, female, shielded; DM 8G+ inputs, HDBaseT compliant; PoDM+ PSE ports (HDBaseT PoE+ compatible) [8]; Each connects to the DM 8G+ output of a DM transmitter or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [7] |
Connectors – Audio/Video Outputs |
| SPEAKER OUTPUT 4Ω/8Ω L – R | (2) 2-pin 7.62 mm 15A detachable terminal blocks; 4-8 Ohm stereo speaker-level audio output; Wire Size: Terminals accept up to 14 AWG (2.5 mm²); Output Power: 25W RMS per channel stereo at 8 Ohms, 4 Ohms tolerant |
| SPEAKER OUTPUT 70/100V | (1) 2-pin 7.62 mm 15A detachable terminal block; Transformer-isolated 70 or 100 Volt mono speaker-level audio output; Wire Size: Terminals accept up to 14 AWG (2.5 mm²); Output Power: 50W RMS mono at 70 or 100 Volts; Note: 4Ω/8Ω and 70/100V outputs are mutually exclusive |
| PROG OUT | (1) 5-pin 3.5 mm detachable terminal block; Balanced/unbalanced stereo line-level audio output; Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced |
| AUX OUT 1 – 2 | (2) 5-pin 3.5 mm detachable terminal blocks; Balanced/unbalanced stereo line-level audio outputs; Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced |
| HDMI 1 – 2 OUTPUTS | (2) HDMI Type A connectors, female; Digital video/audio outputs; (DVI compatible [4]) |
| DM OUTPUT 3 – 4 | (2) 8-pin RJ45 connectors, female, shielded; DM 8G+ outputs, HDBaseT compliant; PoDM+ PSE ports (HDBaseT PoE+ compatible) [8]; Each connects to the DM 8G+ input of a DM receiver or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [7] |
Connectors – Networking, Control, & Power |
| IR/SERIAL OUT 1 – 4 | (4) 2-pin 3.5 mm detachable terminal blocks; IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud |
| IR IN | (1) 3-pin 3.5 mm detachable terminal block; For connection of the CNXRMIRD IR Receiver [6]; Allows control from IR wireless remotes using RC-5 command set |
| INPUT 1 – 4 | (1) 5-pin 3.5 mm detachable terminal block; Comprises (4) programmable digital inputs; Input Voltage Range: 0 to 24 Volts DC, referenced to GND; Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band; Input Impedance: 10k Ohms at >5 Volts, 1M Ohms at <5 Volts; Pull-up Resistor: 2.2k Ohms per input |
| RELAY 1 – 4 | (1) 8-pin 3.5 mm detachable terminal block; Comprises (4) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts |
| COM A – B | (2) DB9 connectors, male; Bidirectional RS-232 ports; Up to 115.2k baud, hardware and software handshaking support |
| NET | (4) 4-pin 3.5 mm detachable terminal blocks; Cresnet Master ports, paralleled; Available Cresnet Power: 10 Watts |
| PoDM+ INPUT PWR | (1) Combo D-Sub 7w2 connector, male; 48 Volt DC power input for PoDM power supply [8]; Enables PoDM+ power sourcing on each DM INPUT/OUTPUT port; Enables PoE power sourcing on the CONTROL SUBNET port |
| SERVICE | (1) USB Type B connector, female; For factory use only |
| 100-240V~ 6.0A 50/60Hz | (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included |
| G | (1) 6-32 screw; Chassis ground lug |
| CONTENT LAN IN 9 | (1) 8-pin RJ45 connector, female; 10Base-T/100Base-TX Ethernet port; Provides a dedicated LAN connection for streaming input & AirMedia [1] |
| CONTROL SUBNET | (1) 8-pin RJ45 connector, female; 10Base-T/100Base-TX/1000Base-T Ethernet port; PoE PSE (Power Sourcing Equipment) port [8]; Provides a dedicated local network for Crestron devices |
| LAN | (1) 8-pin RJ45 connector, female; 10Base-T/100Base-TX/1000Base-T Ethernet port |
| COMPUTER (front) | (1) USB Type B connector, female; USB computer console port (for setup only) |
Controls & Indicators |
| PWR | (1) Green LED, indicates operating power supplied from AC power line |
| NET | (1) Yellow LED, indicates Cresnet bus activity |
| LAN | (1) Yellow LED, indicates Ethernet activity |
| HW-R | (1) Recessed pushbutton for hardware reset, reboots the control system |
| SW-R | (1) Recessed pushbutton for software reset, restarts the software program |
| LCD Display | (1) Green LCD alphanumeric; adjustable backlight; 2 lines x 20 characters per line; displays input/outputs by name, volume levels, setup menus, signal routing, device info, and other system information |
| SOFTKEYS | (4) Pushbuttons for activation of LCD driven functions and passcode entry |
| MENU | (1) Pushbutton, steps menu back one level |
| Λ, V | (2) Pushbuttons, for scrolling up or down through the menu and adjusting menu parameters |
| ENTER | (1) Pushbutton, executes the highlighted menu or value |
| VOLUME | (1) Continuous turn rotary encoder, adjusts menu parameters, defaults to Program audio volume |
| MUTE | (1) Pushbutton and red LED, mutes the Program audio output |
| INFO | (1) Pushbutton and red LED, selects INFO mode to view AV and device info |
| ROUTE | (1) Pushbutton and red LED, selects ROUTE mode to allow routing changes |
| VIEW | (1) Pushbutton and red LED, selects VIEW mode to view current routing |
| INPUT 1 – 9 | (9) Pushbuttons and red LEDs, each selects the corresponding video input for routing |
| OUTPUT 1 – 4, PROG, AUX 1 – 2 | (7) Pushbuttons and red LEDs, each selects the corresponding video or audio output for routing |
| SPEAKER OUTPUT (rear) | (1) 3-position slide switch, selects the amplifier output configuration |
| DM INPUT 7 – 8 (rear) | (4) LEDs, green LEDs indicate DM link status, amber LEDs indicate video and HDCP signal presence, for each corresponding port |
| DM OUTPUT 3 – 4 (rear) | (4) LEDs, green LEDs indicate DM link status, amber LEDs indicate video and HDCP signal presence, for each corresponding port |
| CONTENT LAN IN 9 (rear) | (2) LEDs, (1) green and (1) amber, for indication of Ethernet speed, activity, and link status |
| CONTROL SUBNET (rear) | (2) LEDs, (1) green and (1) amber, for indication of Ethernet speed, activity, and link status |
| LAN (rear) | (2) LEDs, (1) green and (1) amber, for indication of Ethernet speed, activity, and link status |
Power |
| Main Power | 6 Amps @ 100-240 Volts AC, 50/60 Hz |
| Power Consumption | 93 Watts typical; 72 Watts idle |
| Available Cresnet Power | 10 Watts |
| Power over DM (PoDM) | IEEE 802.3at compliant PoDM+ PSE (Power Sourcing Equipment), each DM INPUT/OUTPUT port supplies up to 30 Watts to power one PoDM (Class 0-3) or PoDM+ (Class 4) PD (Powered Device) [8] |
| Power over HDBaseT | IEEE 802.3at PoE+ compliant PSE (Power Sourcing Equipment), each DM INPUT/OUTPUT port supplies up to 30 Watts to power one HDBaseT PoE or PoE+ PD (Powered Device) [8] |
| Power over Ethernet (PoE) | IEEE 802.3at compliant PoE PSE (Power Sourcing Equipment), the CONTROL SUBNET port supplies up to 15.4 Watts to power one PoE (Class 0-3) PD (Powered Device) [8] |
| PoDM Power Supply | Compatible with model PW-4830DUS or DM-PSU-3X8-RPS [6] |
Environmental |
| Temperature | 41° to 104° F (5° to 40° C) |
| Humidity | 10% to 90% RH (non-condensing) |
| Heat Dissipation | 317 BTU/hr typical; 246 BTU/hr idle |
Enclosure |
| Chassis | Metal, black finish, fan-cooled, vented sides |
| Front Panel | Metal, black finish with polycarbonate label overlay |
| Mounting | Freestanding or 3 RU 19-inch rack-mountable (adhesive feet and rack ears included) |
Dimensions |
| Height | 5.20 in (133 mm) without feet |
| Width | 17.28 in (439 mm); 19.00 in (483 mm) with rack ears |
| Depth | 15.75 in (400 mm) |
Weight |
| 15.5 lb (7.1 kg) |
Compliance |
| UL Listed for US & Canada, IC, CE, FCC Part 15 Class A digital device |
Maximum DM 8G+ Cable Lengths |
| Resolution | Cable Type |
---|
DM-CBL-ULTRA DigitalMedia Ultra Cable | DM-CBL-8G DigitalMedia 8G™ Cable | CAT5e (or better) [7] |
---|
|
1080p60 Full HD | 330 ft (100 m) | 330 ft (100 m) | 330 ft (100 m) |
1920x1200 WUXGA |
1600x1200 UXGA |
2048x1080 DCI 2K |
2560x1440 WQHD | 230 ft (70 m) | 165 ft (50 m) |
2560x1600 WQXGA |
3840x2160 4K UHD |
4096x2160 DCI 4K |