DM Lite – HDMI® over CATx Transmitter, Wall Plate, White Textured

Pairs with a DM Lite receiver to provide a simple point-to-point signal extender for HDMI® signals up to UHD and 4K.

Price: $437.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: HD-TX-101-C-1G-E-W-T

    Description

    The HD-TX-101-C-1G-E (-B-T or -W-T) is a wall plate DM Lite transmitter designed to pair with a DM Lite receiver to form a point-to-point signal extender for HDMI® signals. The DM Lite family of products offers a very simple and versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or better) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K.[1]

    For applications requiring a surface mount version, refer to the HD-TX-101-C-E.
    For applications that require IR or RS-232 signal extension, refer to the HD-TXC-101-C-1G-E-B-T or HD-TXC-101-C-1G-E-W-T.

    A USB power port is included on the HD-TX-101-C-1G-E to enable use of a Crestron Multihead HD Video Cable (model CBL-MULTI-HD-6, sold separately). The Multihead cable provides expanded input connectivity to support the connection of a laptop computer or mobile device with HDMI, DisplayPort, Mini DisplayPort, or USB Type-C™ video output.

    Note: The USB power port supplies power only (500 mA maximum) and is suitable for general use to power USB powered devices. No USB data is passed through this connection. It cannot be used to extend USB data, video, or audio signals.

    The HD-TX-101-C-1G-E series comes in black or white, and is designed to mount in a single-gang electrical box or plaster ring (not included). It is normally powered by the receiver over the link cable when using a surface mount receiver. If using a wall plate receiver, a single power pack must be purchased (sold separately, model TBA), which may be connected to either the transmitter or receiver.[2]

    Important: This product is not addressable from a control system and offers no programmable functionality. AV and CEC signals are simply passed through between a single transmitter and receiver pair. The RJ45 link port on this product is exclusively intended for linking with a single DM Lite receiver. It should not be used to connect to any other equipment or network. DM Lite is not compatible with PoE, PoDM, DigitalMedia 8G+® (DM 8G+®), or HDBaseT®.

    Key Features
    • Pairs with a DM Lite receiver to provide a simple point-to-point signal extender
    • Enables extension of HDMI® video and audio signals
    • Links to the receiver via a single CAT5e (or better) twisted pair cable[1]
    • Supports 4K and UHD at up to 130 ft (40 m)
    • Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m)
    • Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
    • Handles 3D video and Deep Color
    • Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
    • Compatible with HDMI, DVI, and Dual-Mode DisplayPort sources [3]
    • Compatible with the Crestron Multihead HD Video Cable (CBL-MULTI-HD-6, sold separately)
    • USB power port supplies power for the Multihead cable and other USB powered devices
    • HDCP 2.2 compliant
    • Passes CEC and EDID signals
    • Flush wall mount design
    • Installs in a single-gang U.S. electrical box (2-1/4” deep) or plaster ring
    • Decorator style faceplates sold separately
    • Normally powered by the receiver (surface mount) over the link cable[2]
    • Universal 100-240V power pack available separately (coming soon) for use with a wall plate receiver[2]

    Specifications

    Video
    Input Signal TypeHDMI w/Deep Color, 3D, & 4K (DVI & Dual-Mode DisplayPort compatible [3])
    Copy ProtectionHDCP 2.2

    Maximum Resolutions

    Scan
    Type
    ResolutionFrame
    Rate
    Color
    Sampling
    Color
    Depth
    Progressive4096x2160 DCI 4K
    &
    3840x2160 4K UHD
    24 Hz4:4:430 bit
    30 Hz4:4:424 bit
    30 Hz4:2:236 bit
    60 Hz4:2:024 bit
    2560x1600 WQXGA60 Hz4:4:436 bit
    1920x1080 HD 1080p60 Hz4:4:436 bit
    Interlaced1920x1080 HD 1080i30 Hz4:4:436 bit

    NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
    Audio
    Input Signal TypeHDMI (Dual-Mode DisplayPort compatible [3])
    FormatsDolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels
    Communications
    HDMIHDCP 2.2, EDID, CEC pass-through
    DM Lite LinkProprietary link for connection between one DM Lite TX & RX only
    Connectors
    HDMI IN(1) HDMI Type A connector, female;
    HDMI digital video/audio input (DVI and Dual-Mode DisplayPort compatible [3])
    POWER ONLY(1) USB Type A connector, female;
    USB power port (500 mA maximum output);
    Supplies power for a Crestron Multihead HD Video Cable (CBL-MULTI-HD-6, sold separately) or other USB powered device
    TO RX (rear)(1) 8-pin RJ45 connector, female, shielded;
    Link port for connection to a DM Lite receiver [1]
    24VDC 1.25A (rear)(1) 2-pin 3.5 mm detachable terminal block;
    24 Volt DC power input;
    Power pack sold separately (if required, model TBA) [2];
    Note: This connection powers both the transmitter and receiver; this connection is not normally used when pairing with a surface mount receiver.[2]
    Indicators
    PWR(1) Green LED, indicates operating power is supplied from the RX via the DM Lite link or from a power pack via the 24VDC input
    HDMI IN(1) Green LED, indicates HDMI input signal presence
    TO RX(2) LEDs (on RJ45 connector), green LED indicates link status, amber LED indicates a valid video signal
    Power
    Power Pack (sold separately)Input: 100-240 Volts AC, 50/60 Hz;
    Output: 1.25 Amps @ 24 Volts DC;
    Model: TBA
    Note: This power pack is only required when pairing with a wall plate receiver. When pairing with a surface mount receiver, use the power pack supplied with that receiver. The transmitter and receiver are powered together using a single power pack connected at either the transmitter or receiver (not both).[2]
    Environmental
    Temperature32° to 104° F (0° to 40° C)
    Humidity20% to 90% RH (non-condensing)
    Construction
    CompositionMetal housing and bracket with black or white polycarbonate front label overlay
    MountingMounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included)
    FaceplateRequires a decorator-style faceplate (FP-G series, sold separately)
    Dimensions
    Height4.08 in (104 mm)
    Width1.81 in (46 mm)
    Depth1.97 in (50 mm)
    Weight
    5.30 oz (150 g)
    Compliance
    UL Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device
    Maximum DM Lite Link Cable Lengths


    Resolution
    Cable Type
    CAT5e (or better),
    DM-CBL-ULTRA DM® Ultra Cable, or
    DM-CBL-8G DM 8G DM 8G® Cable [1]
    1920x1080 FHD 1080p230 ft (70 m)
    1920x1200 WUXGA
    1600x1200 UXGA
    2048x1080 DCI 2K
    2048x1152 QWXGA
    2560x1080 UWFHD130 ft (40 m)
    2560x1440 WQHD
    2560x1600 WQXGA
    3840x2160 4K UHD
    4096x2160 DCI 4K