Crestron HD-TXC-101-C-1G-E-W-T

DM Lite – HDMI® over CATx Transmitter w/IR & RS-232, Wall Plate, White Textured

Pairs with a DM Lite receiver to provide a simple point-to-point signal extender for HDMI® signals up to UHD and 4K, plus RS-232 and IR.

Price: $529.00

Quantity:

Estimate Shipping

Availability: In Stock
Usually ships In 24 - 48 hours

Item #: HD-TXC-101-C-1G-E-W-T

Description

The HD-TXC-101-C-1G-E (-B-T or -W-T) is a wall plate DM Lite transmitter designed to pair with a DM Lite receiver to form a point-to-point signal extender for HDMI®, RS-232, and IR signals. The DM Lite family of products offers a very simple and versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or better) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K. In addition to video and audio, the HD-TXC-101-C-1G-E supports the extension of RS-232 and IR control signals in either direction.[1]

For applications requiring a surface mount version, refer to the HD-TXC-101-C-E.
For applications that do not require IR or RS-232 signal extension, refer to the HD-TX-101-C-1G-E-B-T or HD-TX-101-C-1G-E-W-T.

A USB power port is included on the HD-TXC-101-C-1G-E to enable use of a Crestron Multihead HD Video Cable (model CBL-MULTI-HD-6, sold separately). The Multihead cable provides expanded input connectivity to support the connection of a laptop computer or mobile device with HDMI, DisplayPort, Mini DisplayPort, or USB Type-C™ video output.

Note: The USB power port supplies power only (500 mA maximum) and is suitable for general use to power USB powered devices. No USB data is passed through this connection. It cannot be used to extend USB data, video, or audio signals.

The HD-TXC-101-C-1G-E series comes in black or white, and is designed to mount in a single-gang electrical box or plaster ring (not included). It is normally powered by the receiver over the link cable when using a surface mount receiver. If using a wall plate receiver, a single power pack must be purchased (sold separately, model TBA), which may be connected to either the transmitter or receiver.[2]

Important: This product is not addressable from a control system and offers no programmable functionality. AV, CEC, IR, and RS-232 signals are simply passed through between a single transmitter and receiver pair. The RJ45 link port on this product is exclusively intended for linking with a single DM Lite receiver. It should not be used to connect to any other equipment or network. DM Lite is not compatible with PoE, PoDM, DigitalMedia 8G+® (DM 8G+®), or HDBaseT®.

Key Features

Pairs with a DM Lite receiver to provide a simple point-to-point signal extender
Enables extension of HDMI®, RS-232, and IR signals
Links to the receiver via a single CAT5e (or better) twisted pair cable[1]
Supports 4K and UHD at up to 130 ft (40 m)
Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m)
Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
Handles 3D video and Deep Color
Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
Compatible with HDMI, DVI, and Dual-Mode DisplayPort sources [3]
Compatible with the Crestron Multihead HD Video Cable (CBL-MULTI-HD-6, sold separately)
USB power port supplies power for the Multihead cable and other USB powered devices
HDCP 2.2 compliant
Passes CEC and EDID signals
Extends bidirectional RS-232 and IR control signals
Flush wall mount design
Installs in a single-gang U.S. electrical box (2-1/4” deep) or plaster ring
Decorator style faceplates sold separately
Normally powered by the receiver (surface mount) over the link cable[2]
Universal 100-240V power pack available separately (coming soon) for use with a wall plate receiver[2]

Specifications

Video

Input Signal Type

HDMI w/Deep Color, 3D, & 4K (DVI & Dual-Mode DisplayPort compatible [3])

Copy Protection

HDCP 2.2

Maximum Resolutions

Scan Type	Resolution	Frame Rate	Color Sampling	Color Depth
Progressive	4096x2160 DCI 4K & 3840x2160 4K UHD	24 Hz	4:4:4	30 bit
		30 Hz	4:4:4	24 bit
		30 Hz	4:2:2	36 bit
		60 Hz	4:2:0	24 bit
	2560x1600 WQXGA	60 Hz	4:4:4	36 bit
	1920x1080 HD 1080p	60 Hz	4:4:4	36 bit
Interlaced	1920x1080 HD 1080i	30 Hz	4:4:4	36 bit

NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz

Audio

Input Signal Type

HDMI (Dual-Mode DisplayPort compatible [3])

Formats

Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels

Communications

HDMI

HDCP 2.2, EDID, CEC pass-through

RS-232

2-way serial pass-through up to 115.2k baud (TD/RD only)

Bidirectional IR signal pass-through up to 60 kHz

DM Lite Link

Proprietary link for connection between one DM Lite TX & RX only

Connectors

IR IN/OUT

(1) 4-pin 3.5 mm detachable terminal block;
Comprises (1) IR input port and (1) IR output port;
IR IN is for connection from a Crestron IR control port or other IR signal source and passes the IR input signal to the IR OUT port on the RX;
IR OUT is for connection to an IR emitter (IRP2, sold separately) and transmits the IR signal from the IR IN port on the RX;
Supports IR up to 60 kHz

HDMI IN

(1) HDMI Type A connector, female;
HDMI digital video/audio input (DVI and Dual-Mode DisplayPort compatible [3])

COM

(1) 3-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Passes RS-232 TD/RD data to/from the COM port on the RX;
Supports up to 115.2k baud

POWER ONLY

(1) USB Type A connector, female;
USB power port (500 mA maximum output);
Supplies power for a Crestron Multihead HD Video Cable (CBL-MULTI-HD-6, sold separately) or other USB powered device

TO RX (rear)

(1) 8-pin RJ45 connector, female, shielded;
Link port for connection to a DM Lite receiver [1]

24VDC 1.25A (rear)

(1) 2-pin 3.5 mm detachable terminal block;
24 Volt DC power input;
Power pack sold separately (if required, model TBA) [2];
Note: This connection powers both the transmitter and receiver; this connection is not normally used when pairing with a surface mount receiver.[2]

Indicators

PWR

(1) Green LED, indicates operating power is supplied from the RX via the DM Lite link or from a power pack via the 24VDC input

HDMI IN

(1) Green LED, indicates HDMI input signal presence

TO RX

(2) LEDs (on RJ45 connector), green LED indicates link status, amber LED indicates a valid video signal

Power

Power Pack (sold separately)

Input: 100-240 Volts AC, 50/60 Hz;
Output: 1.25 Amps @ 24 Volts DC;
Model: TBA

Note: This power pack is only required when pairing with a wall plate receiver. When pairing with a surface mount receiver, use the power pack supplied with that receiver. The transmitter and receiver are powered together using a single power pack connected at either the transmitter or receiver (not both).[2]

Environmental

Temperature

32° to 104° F (0° to 40° C)

Humidity

20% to 90% RH (non-condensing)

Construction

Composition

Metal housing and bracket with black or white polycarbonate front label overlay

Mounting

Mounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included)

Faceplate

Requires a decorator-style faceplate (FP-G series, sold separately)

Dimensions

Height

4.08 in (104 mm)

Width

1.81 in (46 mm)

Depth

1.97 in (50 mm)

Weight

5.33 oz (151 g)

Compliance

UL Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device

Maximum DM Lite Link Cable Lengths

Resolution	Cable Type
CAT5e (or better), DM-CBL-ULTRA DM® Ultra Cable, or DM-CBL-8G DM 8G DM 8G® Cable [1]
1920x1080 FHD 1080p	230 ft (70 m)
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 DCI 2K
2048x1152 QWXGA
2560x1080 UWFHD	130 ft (40 m)
2560x1440 WQHD
2560x1600 WQXGA
3840x2160 4K UHD
4096x2160 DCI 4K