Modules

The CLTI terminal blocks are designed to install in CAEN and CAENIB automation enclosures to facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Electrical bypass jumpers on each terminal facilitate testing of each circuit and protect the module during installation. Each CLT terminal block assembly weighs...

The CLTI terminal blocks are designed to install in CAEN and CAENIB automation enclosures to facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Electrical bypass jumpers on each terminal facilitate testing of each circuit and protect the module during installation. Each CLT terminal block assembly weighs...

The CLTI terminal blocks are designed to install in CAEN and CAENIB automation enclosures to facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Electrical bypass jumpers on each terminal facilitate testing of each circuit and protect the module during installation. Each CLT terminal block assembly weighs...

As part of a complete Crestron lighting system, the CLX-1DELV4 lighting control module provides 4 channels of dimming for electronic low-voltage and incandescent loads. Each channel is rated for 1200 Watts, with a total module rating of 1920 Watts. Air-gap relays are provided on every channel output allowing individual circuits to be serviced without disabling the entire module.

As part of a complete Crestron lighting system, the CLX-1DIM8 lighting control module provides 8 channels of dimming for incandescent, magnetic low-voltage, neon/cold cathode, and dimmable 2-wire fluorescent loads. Each channel is rated for 1920 Watts, with a total module rating of 1920 Watts. Air-gap relays are provided on every channel output allowing individual circuits to be serviced without disabling the entire module.

The CLX-1DIMU4 lighting control module provides 4 channels of technologically advanced universal dimming for LED, incandescent, magnetic low-voltage, electronic low-voltage, and 2-wire dimmable fluorescent lighting loads. With unparalleled Constant Power dimming technology, this universal dimmer automatically selects forward- or reverse-phase control based on each channels load when in Auto-Load Detection mode. Each channel of the CLX-1DIMU4 is rated for 480 Watts (4 Amps) with a total module...

As part of a complete Crestron lighting system, the CLX-1FAN4 fan control module provides capacitive-type speed control for up to 4 ceiling fan motors. Each channel provides 4 preset speed settings plus off and is rated for 2 Amps, with a total module rating of 8 Amps.

As part of a complete Crestron lighting system, the CLX-1MC4 motor control module provides control of up to 4 bidirectional motors for drapes, blinds, projection screens, lifts, etc. Each channel is rated for 10 Amps or 1/2 HP, with a total module rating of 16 Amps.

As part of a complete Crestron lighting system, the CLX-2DIM2 lighting control module provides 2 independent channels of dimming for incandescent, magnetic low-voltage, neon/cold cathode, and dimmable 2-wire fluorescent loads. Each channel is rated for 1920 Watts, with a total module rating of 3840 Watts when fed from two separate 20 Amp feeds. Air-gap relays are provided on each channel output allowing an individual circuit to be serviced without disabling the entire module.

As part of a complete Crestron lighting system, the CLX-2DIM8 lighting control module provides 8 channels of dimming for incandescent, magnetic low-voltage, neon/cold cathode, and dimmable 2-wire fluorescent loads. The CLX-2DIM8 is actually composed of two independent 4 channel dimmers in a single module. Each channel is rated for 1920 Watts, with a total module rating of 3840 Watts when fed from two separate 20 Amp feeds. Air-gap relays are provided on every channel output allowing individual...

0-10 Volt 8 Channel Dimmer Module, 2 Feeds

0-10 Volt 8 Channel Dimmer Module, 2 Feeds, 277V

The CLX-2DIMU8 lighting control module provides 8 channels of technologically advanced universal dimming for LED, incandescent, magnetic low-voltage, electronic low-voltage, and 2-wire dimmable fluorescent lighting loads. With unparalleled Constant Power dimming technology, this universal dimmer automatically selects forward- or reverse-phase control based on each channels load when in Auto-Load Detection mode. The CLX-2DIMU8 is composed of two independent 4 channel dimmers; each channel is...

8 Channel Universal Dimmer Module, 2 Feeds, 277V

The CLX-2IND inductor module provides noise suppression for up to 2 dimmed loads. Each channel inserts a high-inductance filter choke inline between any channel of a CLX-Series dimmer module and its load. The CLX-2IND occupies a single module space in a CAEN automation enclosure. Termination of high-voltage wiring to the module is facilitated by a CLT-2IND terminal block, sold separately to enable termination of the wiring anytime prior to installing the module.

The Crestron® CLX-4HSW4 is a four-channel, four-feed switch module designed for 120V lighting system applications. It installs in a CAEN or CAEN-MLO enclosure and provides control of non-dimmable lighting loads including LED, incandescent, fluorescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, and high-intensity discharge. It can also be used to switch motor loads. Individual feed capability provides four independent single-channel switches in one module space. Each...

The CLX-4IND inductor module provides noise suppression for up to 4 dimmed loads. Each channel inserts a high-inductance filter choke inline between any channel of a CLX-Series dimmer module and its load. The CLX-4IND occupies a single module space in a CAEN automation enclosure. Termination of high-voltage wiring to the module is facilitated by a CLT-4IND terminal block, sold separately to enable termination of the wiring anytime prior to installing the module.

As part of a complete Crestron lighting system, the CLXI-1DELV4 lighting control module provides 4 channels of dimming for 230V electronic low-voltage and incandescent loads. Each channel is rated for 2300 Watts, with a total module rating of 2990 Watts. Air-gap relays are provided on every channel output to allow individual circuits to be serviced without disabling the entire module.

As part of a complete Crestron lighting system, the CLXI-1DIM4 lighting control module provides 4 channels of dimming for 230V incandescent, magnetic low-voltage, neon/cold cathode, and dimmable 2-wire fluorescent loads. Each channel is rated for 2300 Watts, with a total module rating of 2990 Watts. Air-gap relays are provided on every channel output to allow individual circuits to be serviced without disabling the entire module.

As part of a complete Crestron lighting system, the CLXI-1MC4 motor control module provides control of up to 4 bidirectional motors for drapes, blinds, projection screens, lifts, etc. Each channel is rated for 8 Amps or 1 HP, with a total module rating of 13 Amps.

As part of a complete Crestron lighting system, the CLXI-2DIM2 lighting control module provides 2 independent channels of dimming for 230V incandescent, magnetic low-voltage, neon/cold cathode, and dimmable 2-wire fluorescent loads. Each channel is rated for 2300 Watts, with a total module rating of 4600 Watts when fed from two separate 16 Amp feeds. Air-gap relays are provided on each channel output to allow an individual circuit to be serviced without disabling the entire module.

As part of a complete Crestron lighting system, the CLXI-2DIM8 lighting control module provides 8 channels of dimming for 230V incandescent, magnetic low-voltage, neon/cold cathode, and dimmable 2-wire fluorescent loads. The CLXI-2DIM8 is actually composed of two independent 4 channel dimmers in a single module. Each channel is rated for 2300 Watts, with a total module rating of 5980 Watts when fed from two separate 16 Amp feeds. Air-gap relays are provided on every channel output to allow...

0-10 Volt 8 Channel Dimmer Module, 2 Feeds - International Version, 230V [Available March 1, 2017]

8 Channel Universal Dimmer Module, 2 Feeds, 230V [Available March 1, 2017]