Power Supply

Provides a 6 ft. (1.8 m) plenum-rated DC power extension cable for use with the MP-AMP30, MP-AMP40, and other 24 Volt DC powered devices. Installed between the powered device and its power pack, this cable enables the MP-AMP30 or MP-AMP40 to meet the requirements for installation in an environmental air-handling space. It is terminated with a 2.1 x 5.5 mm DC power connector on the device end, and a 2.1 x 5.5 mm DC power barrel connector on the power supply end.

The CEN-UPS1250 is a 1250 Watt, 120 Volt uninterruptible power supply and power conditioner Engineered by APC specifically for Crestron Designed to protect Crestron control systems, media servers, video displays and other devices, the CEN-UPS1250 employs pure sine wave battery backup to maintain continuous operation of critical components whenever power is disrupted. Remote monitoring and control through award-winning Crestron RoomView software, and full Crestron control system integration,...

The CLX-PWS75 is a 75 Watt Cresnet Power Supply Module designed to mount in a CAEN Automation Enclosure. A single CLX-PWS75 can be installed in any single-width enclosure, or up to two may be installed side-by-side in a double-width enclosure. Four (4) Cresnet power ports are provided on the CLX-PWS75, which may be used to supply power directly to Cresnet devices, or connect to the external power input ports of a PAC2 or PAC2M.

The CNPWS-75 is a 75 Watt, 24 Volt regulated power supply for powering Cresnet control systems and devices. Two 4-pin network connectors are provided, wired in parallel to provide for versatile connectivity with pass-thru of the Cresnet data signal. The output is fuse protected. Up to three CNPWS-75 power supplies may be rack mounted together using the optional CNXRMAK (sold separately).

The CNPWS-75 is a 75 Watt, 24 Volt regulated power supply for powering Cresnet control systems and devices. Two 4-pin network connectors are provided, wired in parallel to provide for versatile connectivity with pass-thru of the Cresnet data signal. The output is fuse protected. Up to three CNPWS-75 power supplies may be rack mounted together using the optional CNXRMAK (sold separately).

Due to the manufacturer shortage 4TEC has built an after market part that is available as a temporary replacement for this power supply. Please go to part number: 4TEC after market replacement for Crestron CSA-PWS10S-HUB No Ethernet to order replacement if you do not require an ethernet control port. The price is the same as the Crestron unit. The CSA-PWS10S-HUB-ENET Power Supply powers up to 10 Crestron Quiet Motor Technology roller shade or drapery system motors and features an...

A DM-MDA-PWS provides a hot-swappable backup replacement power supply for a Crestron® DM-MD64X64 or DM-MD128X128 DigitalMedia™ Switcher. The DM-MDA-64-PWS is the power supply for the DM-MD64X64; the DM-MDA-128-PWS is the power supply for the DM-MD128X128. The DM-MD64X64 ships with two DM-MDA-64-PWS power supplies included; the DM-MD128X128 ships with three DM-MDA-128-PWS power supplies included. A single power supply on either switcher can be replaced in seconds on-site without requiring any...

A DM-MDA-PWS provides a hot-swappable backup replacement power supply for a CrestronDM-MD64X64 or DM-MD128X128 DigitalMedia Switcher. The DM-MDA-64-PWS is the power supply for the DM-MD64X64; the DM-MDA-128-PWS is the power supply for the DM-MD128X128. The DM-MD64X64 ships with two DM-MDA-64-PWS power supplies included; the DM-MD128X128 ships with three DM-MDA-128-PWS power supplies included. A single power supply on either switcher can be replaced in seconds on-site without requiring any...

Power over DM® (PoDM) is a feature of Crestron® DigitalMedia 8G+® technology that enables operating power for DM 8G+® transmitters and receivers to be carried alongside video, audio, and data signals over a single CAT5e cable. As part of a complete DM system, PoDM can be used to deliver a centralized power distribution solution for a facility full of transmitter and receiver devices, eliminating all the bulky power packs and reducing the number of AC power outlets normally required at every...

Power over DM® (PoDM) is a feature of Crestron® DigitalMedia 8G+® technology that enables many DM 8G+® transmitters and receivers to be powered over the same CATx cable that carries their video, audio, and data signals. Using PoDM affords a one-wire interface solution, and eliminates the need to install a bulky power pack at every transmitter and receiver location.[1]The DM-PSU-8-PLUS supplies power for up to eight PoDM, PoDM+, HDBaseT® PoE, or HDBaseT PoE+ powered devices. It is designed to...

Crestron FTA-PWR series AC Power Outlet Modules are designed for use with any 600 Series FlipTop to provide convenience receptacles within the FlipTop connection compartment. A selection of modules is available to support a range of different countries and regions.

Crestron FTA-PWR series AC Power Outlet Modules are designed for use with any 600 Series FlipTop to provide convenience receptacles within the FlipTop connection compartment. A selection of modules is available to support a range of different countries and regions.

Crestron FTA-PWR series AC Power Outlet Modules are designed for use with any 600 Series FlipTop to provide convenience receptacles within the FlipTop connection compartment. A selection of modules is available to support a range of different countries and regions.

Crestron FTA-PWR series AC Power Outlet Modules are designed for use with any 600 Series FlipTop to provide convenience receptacles within the FlipTop connection compartment. A selection of modules is available to support a range of different countries and regions.

Crestron FTA-PWR series AC Power Outlet Modules are designed for use with any 600 Series FlipTop to provide convenience receptacles within the FlipTop connection compartment. A selection of modules is available to support a range of different countries and regions.

FlipTop AC Power Outlet Module, Dual, Universal

The GLA-PWS50 is a 50 Watt Cresnet Power Supply designed for use with a Crestron Green Light system, or anywhere a wall-mountable Cresnet power supply is needed. The GLA-PWS50 mounts conveniently over a 4" square or 2-gang electrical box. All connections are made inside the electrical box via flying leads using twist-on wire connectors. A partition is included to isolate high voltage from Class 2 wiring within the box.

The GLA-PWSI50 is a 50 Watt Cresnet Power Supply designed for use with a Crestron Green Light system, or anywhere a wall-mountable Cresnet power supply is needed. It is compatible with any line voltage from 100 to 240 Volts, 50 or 60 Hz.

The GLS-LDL-EX-BATT is a battery-powered, wireless, dual-loop photo sensor designed to provide superior natural light sensing and indoor light control in daylight harvesting applications. Two internal photocells one for open-loop daylight sensing and one for closed-loop ambient light sensing effectively cut costs while providing exceptional photo sensing in residential, commercial, or retro-fit applications. The GLS-LDL-EX-BATT monitors natural daylight from windows and signals the lighting...

Crestron Green Light sensors deliver a powerful and cost-effective solution for reducing energy costs and enhancing the functionality of lighting and environmental systems. The GLS-OIR-CSM-EX-BATT is a low-profile, battery-powered occupancy sensor designed for small areas up to 500 square feet to detect when the room is occupied. The GLS-OIR-CSM-EX-BATT allows for wireless connection to a Crestron control system via the infiNET EX wireless network.

The HTT-B2EX-BATT is a battery-powered, two-button wireless keypad designed to control a wide range of applications supported by a Crestron control system. Compact and simplistic in design, the HTT-B2EX-BATT is an ideal tabletop keypad for use as a hotel bedside controller, a conference room presenter selector, or a simple living room lighting and shade controller. The HTT-B2EX-BATT is powered by two lithium coin cell batteries that boast high performance and a long battery life. Outfitted...

The HTT-B2EX-BATT is a battery-powered, two-button wireless keypad designed to control a wide range of applications supported by a Crestron control system. Compact and simplistic in design, the HTT-B2EX-BATT is an ideal tabletop keypad for use as a hotel bedside controller, a conference room presenter selector, or a simple living room lighting and shade controller. The HTT-B2EX-BATT is powered by two lithium coin cell batteries that boast high performance and a long battery life. Outfitted...

The HTT-B2EX-BATT is a battery-powered, two-button wireless keypad designed to control a wide range of applications supported by a Crestron control system. Compact and simplistic in design, the HTT-B2EX-BATT is an ideal tabletop keypad for use as a hotel bedside controller, a conference room presenter selector, or a simple living room lighting and shade controller. The HTT-B2EX-BATT is powered by two lithium coin cell batteries that boast high performance and a long battery life. Outfitted...

The HTT-B2EX-BATT is a battery-powered, two-button wireless keypad designed to control a wide range of applications supported by a Crestron control system. Compact and simplistic in design, the HTT-B2EX-BATT is an ideal tabletop keypad for use as a hotel bedside controller, a conference room presenter selector, or a simple living room lighting and shade controller. The HTT-B2EX-BATT is powered by two lithium coin cell batteries that boast high performance and a long battery life. Outfitted...