E215
Dual 15-inch Two-Way
Passive Loudspeaker
KEY FEATURES
• High output, professional quality sound with
1000 W continuous, 4000 W peak power
• E Series Entertainment System – Advanced
digital signal processing tunings and
options using QSC GXD, PLD amplifiers or
TouchMix™ digital mixers.
• Titanium diaphragm for high fidelity and
long life
• Rugged tour-grade textured paint
• Foam-lined perforated steel grill
• Optional padded transport cover for
protection during transit (E215 CVR)
• Optional M10 rigging kit available for
permanent installation
E215
Entertainment Venues ∙ Houses of Worship ∙ Rental/Production
Mobile Performers
The E215 is a trapezoidal, two-way loudspeaker featuring dual 15-inch 500 W (each,
continuous) die-cast aluminum frame woofers with 3.5-inch voice coil. It employs a
frequency-shading topology across both woofers to maximize low frequency output, while
minimizing interference through the HF crossover transition. It is intended for use when
high-power and extended low-end are needed from a single full-range loudspeaker. A large
format 2.8-inch compression driver attached to the 75° Directivity Matched Transition™
(DMT) waveguide assures that even distant listeners will be well covered.
E Series Loudspeakers
The E Series is a range of passive loudspeakers offering robust construction, trusted
reliability and overall sonic performance beyond expectations. Intended for sound
reinforcement in entertainment applications including live performance, DJ and dance
music, karaoke and event production, E Series loudspeakers will deliver outstanding results.
Building on the proven, QSC “Systems” methodology, the E Series loudspeakers’
performance is further enhanced when paired with QSC GXD or PLD amplifiers or with a
QSC TouchMix™ digital mixer, and taking advantage of the on-board DSP and factory-tuned
presets. These presets support a variety of applications including live sound reinforcement
(with and without subwoofers), stage monitoring, dance music and karaoke.
E Series consists of six models constructed of rugged plywood and coated in black,
textured paint. Heavy-duty grilles lined with foam provide protection for the woofers and an
elegant appearance. E10, E12 and E15 models are equipped with an all metal, dual-angle,
35 mm socket that allows the speaker to be mounted vertically on a pole or angled down
by 10° to improve audience coverage and reduce rear wall reflections. Multiple mounting
options using E Series Yoke or M8 eyebolts are supported. Input connections include dual
NL4 as well as screw terminal receptacles. Additionally, E215 and E218SW models feature
ergonomic, aluminum handles to ease portability.
Optional eyebolt kit shown
Optional transport cover shown
E215
Configuration: 2 x 15-inch, 2-way, non-powered
Frequency Range1 (-10 dB) 39 Hz – 20 kHz
Power Capacity2
: Continuous/Peak 1000 W / 4000 W
Sensitivity 98 dB, 1 W @ 1 m
Coverage Angle 75° conical DMT
Output1 (Peak SPL @ 1m) 134 dB
Drivers:
LF 2 x 381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil
HF 38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver
Nominal Impedance 4 Ω
Cross-over Full-range only, 1.8 kHz
Input Connectors 2 x NL4 1 x barrier strip
Enclosure 11-ply, black texture paint finish. Perforated, powder-coated steel grille with foam lining
Net Weight 108 lb, 49.1 kg
Dimensions (WxHxD) 16.5 x 44.3 x 18.3 in (420 x 1125 x 464 mm)
E215 Specifications
©2017 QSC, LLC all rights reserved. QSC, the QSC logo and TouchMix are registered trademarks of QSC, LLC in the U.S. Patent and Trademark. E Series Spec Sheet 11/2017
+1·800·854·4079 | +1·714·754·6175 | WWW.QSC.COM
Width
420 mm
16.5 in
Depth
464 mm
18.3 in
Height
1125 mm
44.3 in
Height
1125 mm
44.3 in
Width
420 mm
16.5 in
Depth
464 mm
18.3 in
E215 Block Diagram and Input Plate E215 Dimensions
DEEP LP LF F
HPF HF
LPF LF
NL4
Barrier
Strip
NL4
1
1
1
1
2
2
2
2
DEEP LP LF F
HPF HF
LPF LF
NL4
Barrier
Strip
NL4
1
1
1
1
2
2
2
2
Width
420 mm
16.5 in
Depth
464 mm
18.3 in
Height
1125 mm
44.3 in
Height
1125 mm
44.3 in
Width
420 mm
16.5 in
Depth
464 mm
18.3 in
1 With QSC Processing.
2 Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedance in the cabinet
with crossover, full range 30 Hz 12 dB/octave.
Additional specifications to be announced.
Specifications subject to change without notice.