Sensors

The C2N-IRGW-F IR Gateway is a 1-way infrared receiver for Crestron iR wireless handheld remotes and touch panels. It is also compatible with any third-party IR remote utilizing the RC5 command set.

The C2N-RTHS is a wall-mounted temperature and relative humidity sensor that communicates directly with any Crestron control System via the Cresnet control network. One-piece mounting makes the C2N-RTHS simple to install. The 1-1/2 inch diameter face protrudes just 1/8 inch from the wall surface and is easily painted or wallpapered to blend into the wall surface.

The CH-RTS-N is a wall mount temperature sensor that communicates directly with any Crestron® Control System via the Cresnet® control network.

The CHV-RSS is a remote temperature sensor designed for use with select Crestron thermostats. Ideally suited for concrete slab, under floor, or any outdoor installation, the CHV-RSS is an extremely accurate temperature sensor potted within a rugged, waterproof stainless steel sleeve. Using CAT5 or similar low-capacitance wire, the remote sensor may be mounted up to 500 feet (152 meters) from the thermostat. One-piece mounting and a single non-polarized twisted-pair connection make the CHV-RSS...

The CHV-RTHS is a wall-mounted remote temperature and relative humidity sensor designed for use with select Crestron thermostats. Using CAT5 or similar low-capacitance wire, the remote sensor may be mounted up to 500 feet (152 meters) from the thermostat. One-piece mounting and a single non-polarized twisted-pair connection make the CHV-RTHS simple to install. The 1-1/2 inch diameter face protrudes just 1/8 inch from the wall surface and is easily painted or wallpapered to blend into the wall...

The CHV-RTS is a wall-mounted remote temperature sensor designed for use with select Crestron thermostats. Using CAT5 or similar low-capacitance wire, the remote sensor may be mounted up to 500 feet (152 meters) from the thermostat. One-piece mounting and a single non-polarized twisted-pair connection make the CHV-RTS simple to install. The 1-1/2 inch diameter face protrudes just 1/8 inch from the wall surface and is easily painted or wallpapered to blend into the wall surface. Up to four...

The CLC-1DIMFLV2EX-24V is a two-channel 0-10 Volt dimmer capable of controlling two independent, 24 Volt DC lighting loads in an EMerge Alliance® application. Perfect for use with the Armstrong® DC FlexZone™ ceiling grid,[1] this module’s ultra-slim design allows it to be installed in the ceiling, either on or near the lighting fixture. Powered by infiNET EX® technology, the CLC device communicates wirelessly with the Crestron® control system, making it perfect for both new and retrofit...

The CLCI-1SW2EX-is a 2-channel switch capable of controlling 2 independent 230 VAC lighting loads. Its ultra-slim design allows it to be installed in the ceiling, next to or near the fixture. Powered by infiNET EX technology, the CLCI device communicates wirelessly with The Crestron control system, making it perfect for both new and retrofit applications. Best of all, the CLCI installs inline without requiring any special wiring and can be controlled via a standard light switch.

The CLF-LDIMUEX is a universal lamp dimmer capable of dimming most 120 Volt AC lighting loads, such as those commonly found with table and floor lamps. Powered by infiNET EX® technology, this device communicates wirelessly with the Crestron® control system, making it perfect for both new and retrofit applications. Intuitively control CLF-LDIMUEX connected lamps with Crestron touch screens, keypads, display monitors, remotes, and other remote control devices. The CLF-LDIMUEX-W-CORD model has an...

The CLS-EXP-DIM enables the expansion of Crestron iLux Integrated Lighting System (CLS-C6 series) and other Crestron lighting dimmers to support 120, 230, or 277 Volt loads up to 16 Amps. It allows any output channel of the iLux system to dim a fully loaded circuit of LED[1], incandescent, magnetic low-voltage, neon/cold cathode, or 2-wire dimmable fluorescent lighting loads. It is also compatible with CLW-Series[2] in-wall dimmers and select CLX-Series lighting control modules[3].

The CLS-EXP-DIMFDB enables the expansion of Crestron iLux Integrated Lighting System (CLS-C6 series) and other Crestron lighting dimmers to allow control of 3-wire electronic fluorescent dimming ballasts. A single model supports 120, 230, or 277 Volt loads up to 16 Amps. Any output channel of the iLux system can be used to control the CLS-EXP-DIMFDB to dim a fully loaded circuit. It is also compatible with CLW-Series[1] in-wall dimmers and select CLX-Series lighting control modules[2].

The CLS-EXP-DIMFLV is a 0-10 Volt dimming expansion module for The Crestron iLux Integrated Lighting System (CLS-C6 Series) and other Crestron lighting dimmers. It can also be used to switch non-dimmable loads. A single model supports a 120, 230, or 277 Volt load up to 16 Amps.Any output channel of the iLux system can be used to control the CLS-EXP-DIMFLV. It is also compatible with CLW Series[1] in-wall dimmers and select CLX Series lighting control modules.[2] The metal enclosure is designed...

The CLS-EXP-DIMU enables the expansion of Crestron iLux Integrated Lighting System (CLS-C6 series) and other Crestron lighting dimmers to allow dimming of both forward and reverse phase type loads. Supported loads include LED[1], electronic low-voltage, magnetic low-voltage, incandescent, neon/cold cathode, or 2-wire dimmable fluorescent. A single model supports 120, 230, or 277 Volt loads up to 16 Amps.

The CLW-LDIMEX-is a plug in dimmer designed to operate as part of a complete Crestron automation system communicating via the infiNET EX wireless control network. Without the need for additional control wiring, the CLW-LDIMEX-easily acts in place of standard in-wall dimmer or light switch for conventional floor and table lamps.infiNET EXUltra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need...

The CLW-LDIMEX-is a plug in dimmer designed to operate as part of a complete Crestron automation system communicating via the infiNET EX wireless control network. Without the need for additional control wiring, the CLW-LDIMEX-easily acts in place of standard in-wall dimmer or light switch for conventional floor and table lamps.infiNET EXUltra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need...

The CLW-LDIMEX-is a plug in dimmer designed to operate as part of a complete Crestron automation system communicating via the infiNET EX wireless control network. Without the need for additional control wiring, the CLW-LDIMEX-easily acts in place of standard in-wall dimmer or light switch for conventional floor and table lamps.infiNET EXUltra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need...

The CLXI-2IND inductor module provides noise suppression for up to 2 dimmed loads. Each channel inserts a high-inductance filter choke inline between any channel of a CLXI-Series dimmer module and its load. The CLXI-2IND occupies a single module space in a CAEN or CAENIB automation enclosure. Termination of high-voltage wiring to the module is facilitated by either a CLTI-2IND terminal block or CLTIBN-2IND circuit breaker terminal block, each sold separately to enable termination of the wiring...

Measures true color temperature and intensity of natural sunlight or any other lighting source. Enables indoor lighting to be regulated to match the actual natural sunlight outdoors. IP67 rated for outdoor rooftop installation. Also suitable for indoor applications.The Crestron SolarSync™ Outdoor Daylight and Color Temperature Sensor (GLS-LCCT) enables the ability to regulate indoor lighting to match the intensity and color temperature of actual daylight outdoors. A single SolarSync™ sensor...

The GLS-LCL is a photo sensor that measures ambient light in order to achieve the optimal balance of natural and artificial lighting in an indoor space in daylight harvesting applications. By harnessing natural daylight from windows and skylights, electrical lighting can be dimmed, reducing energy usage while maintaining a consistent light level for a more efficient and comfortable work or living space.

The GLS-LEXT is a photo sensor for use in outdoor spaces such as in parking lots, playgrounds, and storage areas. The sensor measures daylight and signals the control system to turn on the exterior lights when the light level falls below a certain threshold. Unlike with a timer, a sensor can account for daytime storms and doesn't need to be programmed for sunset and sunrise.

The GLS-LOL is a photo sensor that measures light in order to achieve the optimal balance of natural and artificial lighting in an indoor space in daylight harvesting applications. Intended for use with an open-loop type system, the GLS-LOL continually monitors the amount of daylight coming through a window or skylight, enabling the control system to dim or switch off room lighting when there is sufficient daylight available to light the space.Open-loop photosensors provide a cost-effective...

Crestron Green Light sensors deliver a powerful and cost-effective solution for reducing energy costs and enhancing the functionality of lighting and environmental systems. The GLS-ODT-C-CN is a low-profile ceiling-mount occupancy sensor designed for large areas up to 2000 square feet to detect when the room is occupied, making it great for use in large spaces such as auditoriums, warehouses, and building lobbies. Dual-technology motion sensing, available with the GLS-ODT-C-CN, affords extreme...

The GLS-ODT-C-NS is a low-profile, ceiling-mount occupancy sensor that delivers a powerful and cost-effective solution for reducing energy costs and enhancing the functionality of standalone lighting systems. It is designed for large areas up to 2000 square feet to detect when the room is occupied, making it great for use in large spaces such as auditoriums, warehouses, and building lobbies. Dual-technology motion sensing, available with the GLS-ODT-C-NS, affords extreme reliability for...