Switchers

A DM-MDA-FANTRAY provides a backup replacement cooling fan tray assembly for a CrestronDM-MD64X64 or DM-MD128X128 DigitalMedia Switcher. The DM-MDA-64-FANTRAY is the fan tray for the DM-MD64X64; the DM-MDA-128-FANTRAY is the fan tray for the DM-MD128X128. The DM-MD64X64 and DM-MD128X128 each ship with one fan tray included. On either switcher, the complete fan tray assembly can be swapped in seconds on-site without requiring any tools, and without shutting down or removing the switcher from...

A DM-MDA-FANTRAY provides a backup replacement cooling fan tray assembly for a CrestronDM-MD64X64 or DM-MD128X128 DigitalMedia Switcher. The DM-MDA-64-FANTRAY is the fan tray for the DM-MD64X64; the DM-MDA-128-FANTRAY is the fan tray for the DM-MD128X128. The DM-MD64X64 and DM-MD128X128 each ship with one fan tray included. On either switcher, the complete fan tray assembly can be swapped in seconds on-site without requiring any tools, and without shutting down or removing the switcher from...

The Crestron® DM-RMC-100-STR is a compact H.264 streaming decoder designed to receive high-definition AV signals over an IP network. It provides a perfect complement to any DigitalMedia™ switcher with a streaming output, and can also be used to add streaming input capability to other switchers and devices. By transporting all video, audio, control, and power signals through a single PoE LAN connection, the DM-RMC-100-STR delivers the perfect solution for applications where new or dedicated...

The DM-RX1-1G is a DM CAT receiver that installs in a single-gang electrical box to provide a convenient interface for a single display device as part of a complete Crestron DigitalMedia system. The DM-RX1-1G is ideal for wall, lectern, and floor box applications in a boardroom, classroom, auditorium, or residence. It provides a single HDMI output and connects to the head end using a single Crestron DM cable[1]. Standard gang-box mounting allows for installation adjacent to an Ethernet jack...

The DM-TX-100 is a DM® CAT transmitter that provides a single HDMI® input for a computer or high-definition AV source as part of a complete Crestron® DigitalMedia™system. It is ideal for use at a lectern, conference table, or any remote location in a boardroom, classroom, auditorium, or residence to route an HDMI signal to a display or switcher many feet away. The DM-TX-100 connects to the head end or display location using a single Crestron DM cable. In addition to HDMI, it includes an...

The DM-TX-200-2G is a DM CAT transmitter and switcher that installs in a double-gang electrical box to provide a convenient interface for computers and high-definition AV sources as part of a complete Crestron DigitalMedia system. The DM-TX-200-2G is ideal for wall, lectern, and floor box applications in a boardroom, classroom, auditorium, or residence. It connects to the head end or display location using a single Crestron DM cable, providing HDMI, VGA, and analog audio inputs, plus a USB HID...

The DM-TX-200-2G is a DM CAT transmitter and switcher that installs in a double-gang electrical box to provide a convenient interface for computers and high-definition AV sources as part of a complete Crestron DigitalMedia system. The DM-TX-200-2G is ideal for wall, lectern, and floor box applications in a boardroom, classroom, auditorium, or residence. It connects to the head end or display location using a single Crestron DM cable, providing HDMI, VGA, and analog audio inputs, plus a USB HID...

The DM-TX-300N is a DM CAT transmitter and switcher that offers a versatile interface for computers and high-definition AV sources as part of a complete Crestron DigitalMedia system. Compact and rack-mountable, the DM-TX-300N connects to the head end or display location using a single Crestron DM cable. It provides HDMI, DVI, VGA, S/PDIF, and analog video and audio inputs, plus Ethernet, RS-232, and IR control ports for a total connectivity solution.

The DM-TX-300N-F is a DM Fiber transmitter and switcher that offers a versatile interface for computers and high-definition AV sources as part of a complete Crestron DigitalMedia system. Compact and rack-mountable, the DM-TX-300N-F connects to the head end or display location using multimode fiber optic cable. It provides HDMI, DVI, VGA, S/PDIF, and analog video and audio inputs, plus Ethernet, RS-232, and IR control ports for a total connectivity solution.

The DM-TX-401-C provides a versatile interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+® transmitter and switcher, providing DisplayPort, HDMI®, VGA, composite video, and analog audio inputs. It also functions as a control module, providing RS-232 and IR control ports, plus Ethernet and USB HID ports for a total connectivity solution. In addition to DM 8G+, it is also compatible with HDBaseT®, allowing it to be...

The DM-TX-401-S provides a versatile interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G® Fiber transmitter and switcher, providing DisplayPort, HDMI®, VGA, composite video, and analog audio inputs. It also functions as a control module, providing RS-232 and IR control ports, plus Ethernet and USB HID ports for a total connectivity solution. It can be rack-mounted, placed on a shelf, or attached under a table [1],...

The DM-TX-401-S2 provides a versatile interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G® SM Fiber transmitter and switcher, providing DisplayPort, HDMI®, VGA, composite video, and analog audio inputs. It also functions as a control module, providing RS-232 and IR control ports, plus Ethernet and USB HID ports for a total connectivity solution. It can be rack-mounted, placed on a shelf, or attached under a table...

The DMB-4K-I-C is an input blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent DM 8G+® inputs, which are also compatible with HDBaseT®. Using a single CAT type twisted pair cable, each DM 8G+ input enables the connection of a DM 8G+ transmitter, the output of another DM® switcher, or an HDBaseT® certified source.[1]4K Ultra HDAll inputs on the DMB-4K-I-C are capable of handling video resolutions up to 4K and Ultra HD. Support for 4K video...

The DMB-4K-I-HD is an input blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® inputs with complementary analog audio inputs.[1] The HDMI inputs are each capable of handling Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP 2.2 [2], Deep Color, 3D, and high-bitrate 7.1 audio. The analog audio inputs are enabled using the optional Analog Audio Breakout Box, which provides support for balanced or unbalanced...

The DMB-4K-I-HD-DNT is an input blade designed for use with any blade-based Crestron DigitalMedia Switcher. It provides eight independent HDMI inputs with complementary analog audio inputs [1] and Dante audio networking. Each HDMI input handles Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP 2.2, Deep Color, 3D, and high-bitrate 7.1 audio. Support for Dante audio networking allows for interfacing with other Dante enabled equipment over the local area network to send and...

The DMB-4K-O-C is an output blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent DM 8G+® outputs, which are also compatible with HDBaseT®. Using a single CAT type twisted pair cable, each DM 8G+ output enables connection to a DM 8G+ receiver, the input of another DM® switcher, or an HDBaseT® certified display device or receiver.[1]Note: Older units with Crestron Material # 6506002 support HDCP 1.2 only. A hardware replacement using...

The DMB-4K-O-HD-DNT is an output blade designed for use with any blade-based CrestronDigitalMedia Switcher. It provides eight independent HDMI outputs with complementary analog audio outputs [1] and Dante audio networking. The HDMI outputs are each capable of handling Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP 2.2, Deep Color, and high-bitrate 7.1 audio. Built-in 4K scaling enables the devices connected to each HDMI output to handle any video resolution from NTSC...

A CPU blade is included with every DM-MD64X64 and DM-MD128X128 DigitalMedia Switcher. The DMB-CPU-64 is the CPU blade for the DM-MD64X64; the DMB-CPU-128 is the CPU blade for the DM-MD128X128. Either CPU blade can be purchased separately to provide a backup replacement. Replacement of the CPU blade can be performed on site without requiring any tools and without removing the switcher from the equipment rack. Replacement takes just seconds, although a system reboot may be required to activate...

A CPU blade is included with every DM-MD64X64 and DM-MD128X128 DigitalMedia Switcher. The DMB-CPU-64 is the CPU blade for the DM-MD64X64; the DMB-CPU-128 is the CPU blade for the DM-MD128X128. Either CPU blade can be purchased separately to provide a backup replacement. Replacement of the CPU blade can be performed on site without requiring any tools and without removing the switcher from the equipment rack. Replacement takes just seconds, although a system reboot may be required to activate...

The DMB-I-S is an input blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent DM 8G® Fiber inputs. Each DM 8G Fiber input enables the connection of a DM 8G Fiber Transmitter, or the output of another DM® switcher. Just one multimode fiber optic strand is required per input, supporting distances up to 1000 feet (300 m) using CresFiber® 8G, or 500 feet (150 m) using other multimode fiber optic cable.[1] Key FeaturesModular input blade for a...

The DMB-I-S2 is an input blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent DM 8G® SM Fiber inputs. Each DM 8G SM Fiber input enables the connection of a DM 8G SM Fiber Transmitter, or the output of another DM® switcher. Just one single-mode fiber optic strand is required per input, supporting distances up to 7.5 miles (12 km) using CresFiber® 8G SM or G.652.D single-mode fiber optic cable.[1] Key FeaturesModular input blade for a...

The DMB-O-S is an output blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent DM 8G® Fiber outputs. Each DM 8G Fiber output enables connection to a DM 8G Fiber Receiver, or to the input of another DM® switcher. Just one multimode fiber optic strand is required per output, supporting distances up to 1000 feet (300 m) using CresFiber® 8G, or 500 feet (150 m) using other multimode fiber optic cable.[1] Key FeaturesModular output blade for a...

The DMB-O-S2 is an output blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent DM 8G® SM Fiber outputs. Each DM 8G SM Fiber output enables connection to a DM 8G SM Fiber Receiver, or to the input of another DM® switcher. Just one single-mode fiber optic strand is required per output, supporting distances up to 7.5 miles (12 km) using CresFiber® 8G SM or G.652.D single-mode fiber optic cable.[1] Key FeaturesModular output blade for a...

Provides a backup replacement CPU card for a DM-MD8X8-CPU3, DM-MD16X16-CPU3, and DM-MD32X32-CPU3 DigitalMedia™ switcher and related redundant power supply models (DM-MD8X8-CPU3-RPS, DM-MD16X16-CPU3-RPS, and DM-MD32X32-CPU3-RPS). Offers an upgrade to the DMC-CPU card of previous DigitalMedia switcher models (DM-MD8X8, DM-MD16X16, DM-MD32X32, DM-MD8X8-RPS, DM-MD16X16-RPS, and DM-MD32X32-RPS). Based on the 3-Series® platform. Provides enterprise-grade security, overall improved performance, and...