Room Availability Light Bar for TSS-7, TSW-760, & TSW-760-NC Series, White

Adds 180° visual indication of room availability to a TSS-7, TSW-760, or TSW-760-NC series touch screen.

Price: $460.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: TSW-760-LB-W

    Description

    The TSW-760-LB Series Light Bar is an add-on accessory for a TSS-7 , TSW-760, or TSW-760-NC Series Touch Screen to provide 180° visual indication of the room availability status. With just a glance down the hallway, the Light Bar provides highly-visible indication of a room’s availability as part of a complete Crestron® enterprise room scheduling solution. It mounts to the rear of the touch screen and provides a ring of light around the perimeter of the touch screen. Its clean, stylish appearance and vivid color illumination complement any corporate office environment.

    Room Availability Status
    For room scheduling applications, the TSW-760-LB requires no special programming or configuration. The color of illumination is controlled by the room scheduling application, which runs on the touch screen and syncs with the Crestron Fusion® Enterprise Management Service or other supported calendaring application. It illuminates green when the room is available and red when the room is occupied. It can also blink to indicate an emergency message broadcast from Crestron Fusion.

    Custom RGB Color Mixing
    For custom applications, the TSW-760-LB can be programmed to illuminate in any desired color. Its tri-color RGB LEDs allow for a full spectrum of colors by blending the red, green, and blue elements in 1% increments per color. Custom RGB color mixing is performed through programming of the Crestron control system controlling the touch screen (TSW-760[-NC] series only). The control system can be programmed to support all types of functionality, enabling colors to alternate, fade in and out, or blink on and off as desired.[1]

    Key Features
    • Adds 180° visual indication of room availability to a TSS-7, TSW-760, or TSW-760-NC series touch screen
    • Reveals every free meeting room at a glance down the hallway
    • Provides a stylish ring of light around the perimeter of the touch screen
    • Illuminates vivid green or red to indicate room availability status
    • RGB LEDs allow any color illumination (except white) via custom control system programming [1]
    • Energy efficient at less than 2 Watts power consumption
    • Mounts easily to the rear of the touch screen and connects via USB [2]
    • Compatible with in-wall and multi-surface mounting options

    Specifications

    Indicator
    IlluminationRGB LED
    FunctionalitySupports alternating red/green indication of room availability status for room scheduling; supports RGB color mixing via custom control system programming [1]
    Communications
    USBUSB 2.0 device for connection to a TSS-7, TSW-760, or TSW-760-NC series touch screen
    Connectors
    USB(1) Attached lead with USB Type A connector, male;
    USB 2.0 device port [2];
    Connects to the USB host port on the touch screen
    Flex Circuit SlotAttaches the light bar panel to the control module
    Power
    USB Power2.5 Watts
    Power Consumption1.2 Watts typical
    Environmental
    Temperature41° to 113° F (5° to 45° C)
    Humidity10% to 90% RH (non-condensing)
    Heat Dissipation4 BTU/hr
    Construction
    CompositionTwo-piece assembly composed of a control module and light-diffusing plastic light bar panel
    MountingControl module attaches to the rear of the touch screen using screws, light bar panel sandwiches between the touch screen and mounting surface, 1-3/8 in (35 mm) minimum mounting depth, compatible with all TSS-7 and TSW-760(-NC) supported electrical boxes and multi-surface mounting options (not compatible with the TSW-760-TTK series tabletop kit)
    Dimensions
    Height4.79 in (122 mm)
    Width8.12 in (207 mm)
    Depth1.91 in (49 mm)
    Dimensions shown are for the complete touch screen and light bar assembly; projects 0.6 inch (15 mm) from the mounting surface
    Weight
    3.71 oz (105 g)
    Compliance
    CE, IC, FCC Part 15 Class B digital device