A Zūm™ occupancy sensor offers a cost-saving solution for reducing energy usage in rooms equipped with a Zūm commercial room lighting system. The ZUMMESH-PIR-OCCUPANCY-BATT is a passive infrared occupancy sensor designed for ceiling mount installation in areas up to 500 square feet or 46.5 square meters. It communicates wirelessly with a Zūm dimmer, switch, or load controller to turn lights on and off automatically based on room occupancy and vacancy.[1] Up to eight occupancy sensors may be employed for increased coverage.
The ZUMMESH-PIR-OCCUPANCY-BATT is battery powered and completely wireless. It operates for up to ten years or more on a single 9 Volt lithium battery (included). Zūm Mesh wireless technology affords easy “pair and play” setup and integration as part of a complete Zūm commercial room lighting system.[2]
Featuring passive infrared (PIR) technology, the ZUMMESH-PIR-OCCUPANCY-BATT employs a highly sensitive specialized lens that divides the field-of-view into sensor zones. The sensor detects motion when a warm body passes between zones, achieving dependable motion detection with superior immunity to false triggering from vibrations, inanimate objects, or movement in an adjacent corridor. The detection sensitivity is adjustable for optimum performance. Timeout can be set anywhere from 30 seconds to 30 minutes to maintain occupied status during short periods of inactivity. A half mask and perforated mask are included to customize the coverage area.
Please refer to the Zūm Lighting Control System Setup Guide (Doc # 7957) for additional information.
Key Features
- Zūm™ wireless ceiling-mount occupancy sensor
- Passive infrared motion detection
- 360 degrees, 500 sq ft (46.5 m2) coverage
- Half mask and perforated mask included
- Detects room occupancy and vacancy
- Automates control of Zūm dimmers, switches, and load controllers to reduce energy usage[1]
- Turns lights on when the room is occupied and off when the room is vacant
- 10-year battery life using included 9 Volt lithium battery
- Zūm Mesh peer-to-peer RF communications for easy integration into a complete standalone or networked Zūm wireless lighting control solution [2]
- Discreet, low-profile appearance
- Meets UL® 916 standard for energy management equipment
- Meets CEC Title 24 energy efficiency standards [3]
- Meets ASHRAE® 90.1 energy efficiency standards [4]
- ICC® International Energy Conservation Code® compliant [5]
Sensing Sensor TechnologyPassive infrared Coverage Area500 square feet (46.5 square meters) Coverage Pattern360 degrees (half mask and perforated mask included) Major Motion Area150 to 500 square feet (13.9 to 46.4 square meters) Minor Motion Area0 to 150 square feet (0 to 13.9 square meters) Note: A maximum of eight occupancy sensors is permitted per room; do not combine occupancy sensors with vacancy sensors in the same room.Wireless Communications RF TransceiverZūm Mesh 2-way RF, 2.4 GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant Range50 ft (15 m) to nearest peer-to-peer mesh network device(s), subject to site-specific conditions and individual device capabilities [2] Note: A maximum of 32 Zūm Mesh wireless devices is permitted per room.Controls & Indicators Sensitivity(1) Knob (behind cover), adjusts PIR sensitivity from low to high Timeout(1) Knob (behind cover), adjusts timeout from 30 seconds to 30 minutes Test(1) Pushbutton (behind cover) for test mode, room setup, factory reset, and battery condition Status(1) Red and (1) green LEDs for test mode, room setup, factory reset, and battery conditionPower Battery(1) Ultralife® U9VL-J-P 9 Volt 1200 mAh lithium disposable battery (included) Battery Life10 years under normal operating conditionsEnvironmental Temperature32° to 104° F (0° to 40° C) Humidity0% to 95% RH (non-condensing)Construction HousingPlastic, removable cover, white finish MountingCeiling surface mount, 3 inch (76 mm) screw spacingDimensions Height1.19 in (31 mm) Diameter4.38 in (112 mm)Weight Without Battery3.5 oz (98 g) With Included Battery4.8 oz (135 g)Compliance UL Listed for US & Canada, CE, IC, FCC Part 15 Class A digital device, UL 60730-1, UL 916, CEC Title 24 [3], ASHRAE 90.1 [4], IECC [5]