Crestron

The HTT-B2EX-BATT is a battery-powered, two-button wireless keypad designed to control a wide range of applications supported by a Crestron control system. Compact and simplistic in design, the HTT-B2EX-BATT is an ideal tabletop keypad for use as a hotel bedside controller, a conference room presenter selector, or a simple living room lighting and shade controller. The HTT-B2EX-BATT is powered by two lithium coin cell batteries that boast high performance and a long battery life. Outfitted...

The HTT-B2EX-BATT is a battery-powered, two-button wireless keypad designed to control a wide range of applications supported by a Crestron control system. Compact and simplistic in design, the HTT-B2EX-BATT is an ideal tabletop keypad for use as a hotel bedside controller, a conference room presenter selector, or a simple living room lighting and shade controller. The HTT-B2EX-BATT is powered by two lithium coin cell batteries that boast high performance and a long battery life. Outfitted...

Crestron FTA-PWR series AC Power Outlet Modules are designed for use with any 600 Series FlipTop to provide convenience receptacles within the FlipTop connection compartment. A selection of modules is available to support a range of different countries and regions.

The PW-4818DU is an optional accessory for any DMPS Series DigitalMedia Presentation System. it supplies up to 90 Watts of power to enable PoDM (Power over DigitalMedia sourcing capability through the DM 8G+ ports on the DMPS.

Crestron Green Light sensors deliver a powerful and cost-effective solution for reducing energy costs and enhancing the functionality of lighting and environmental systems. The GLS-OIR-CSM-EX-BATT is a low-profile, battery-powered occupancy sensor designed for small areas up to 500 square feet to detect when the room is occupied. The GLS-OIR-CSM-EX-BATT allows for wireless connection to a Crestron control system via the infiNET EX wireless network.

The GLA-PWS50 is a 50 Watt Cresnet Power Supply designed for use with a Crestron Green Light system, or anywhere a wall-mountable Cresnet power supply is needed. The GLA-PWS50 mounts conveniently over a 4" square or 2-gang electrical box. All connections are made inside the electrical box via flying leads using twist-on wire connectors. A partition is included to isolate high voltage from Class 2 wiring within the box.

The GLA-PWSI50 is a 50 Watt Cresnet Power Supply designed for use with a Crestron Green Light system, or anywhere a wall-mountable Cresnet power supply is needed. It is compatible with any line voltage from 100 to 240 Volts, 50 or 60 Hz.

The CNPWS-75 is a 75 Watt, 24 Volt regulated power supply for powering Cresnet control systems and devices. Two 4-pin network connectors are provided, wired in parallel to provide for versatile connectivity with pass-thru of the Cresnet data signal. The output is fuse protected. Up to three CNPWS-75 power supplies may be rack mounted together using the optional CNXRMAK (sold separately).

The CNPWS-75 is a 75 Watt, 24 Volt regulated power supply for powering Cresnet control systems and devices. Two 4-pin network connectors are provided, wired in parallel to provide for versatile connectivity with pass-thru of the Cresnet data signal. The output is fuse protected. Up to three CNPWS-75 power supplies may be rack mounted together using the optional CNXRMAK (sold separately).

The CLX-PWS75 is a 75 Watt Cresnet Power Supply Module designed to mount in a CAEN Automation Enclosure. A single CLX-PWS75 can be installed in any single-width enclosure, or up to two may be installed side-by-side in a double-width enclosure. Four (4) Cresnet power ports are provided on the CLX-PWS75, which may be used to supply power directly to Cresnet devices, or connect to the external power input ports of a PAC2 or PAC2M.

The PW-4830DUS is an optional accessory for the DMB-4K-I-C 8-Channel DM 8G+ Input Blade and DMB-4K-O-C 8-Channel DM 8G+ Output Blade. It is a high efficiency power pack that supplies up to 150 Watts of power to enable PoDM (Power over DigitalMedia sourcing capability through any, or all, of the blades eight DM 8G+ ports. The PW-4830DUS supports one (1) blade. Systems with multiple DM 8G+ blades require a dedicated PW-4830DUS per each individual blade.

A DM-MDA-PWS provides a hot-swappable backup replacement power supply for a CrestronDM-MD64X64 or DM-MD128X128 DigitalMedia Switcher. The DM-MDA-64-PWS is the power supply for the DM-MD64X64; the DM-MDA-128-PWS is the power supply for the DM-MD128X128. The DM-MD64X64 ships with two DM-MDA-64-PWS power supplies included; the DM-MD128X128 ships with three DM-MDA-128-PWS power supplies included. A single power supply on either switcher can be replaced in seconds on-site without requiring any...