Crestron

Power over DM® (PoDM) is a feature of Crestron® DigitalMedia 8G+® technology that enables many DM 8G+® transmitters and receivers to be powered over the same CATx cable that carries their video, audio, and data signals. Using PoDM affords a one-wire interface solution, and eliminates the need to install a bulky power pack at every transmitter and receiver location.[1]The DM-PSU-8-PLUS supplies power for up to eight PoDM, PoDM+, HDBaseT® PoE, or HDBaseT PoE+ powered devices. It is designed to...

A DM-MDA-PWS provides a hot-swappable backup replacement power supply for a Crestron® DM-MD64X64 or DM-MD128X128 DigitalMedia™ Switcher. The DM-MDA-64-PWS is the power supply for the DM-MD64X64; the DM-MDA-128-PWS is the power supply for the DM-MD128X128. The DM-MD64X64 ships with two DM-MDA-64-PWS power supplies included; the DM-MD128X128 ships with three DM-MDA-128-PWS power supplies included. A single power supply on either switcher can be replaced in seconds on-site without requiring any...

Power over DM® (PoDM) is a feature of Crestron® DigitalMedia 8G+® technology that enables operating power for DM 8G+® transmitters and receivers to be carried alongside video, audio, and data signals over a single CAT5e cable. As part of a complete DM system, PoDM can be used to deliver a centralized power distribution solution for a facility full of transmitter and receiver devices, eliminating all the bulky power packs and reducing the number of AC power outlets normally required at every...

The CEN-UPS1250 is a 1250 Watt, 120 Volt uninterruptible power supply and power conditioner Engineered by APC specifically for Crestron Designed to protect Crestron control systems, media servers, video displays and other devices, the CEN-UPS1250 employs pure sine wave battery backup to maintain continuous operation of critical components whenever power is disrupted. Remote monitoring and control through award-winning Crestron RoomView software, and full Crestron control system integration,...

The GLS-LDL-EX-BATT is a battery-powered, wireless, dual-loop photo sensor designed to provide superior natural light sensing and indoor light control in daylight harvesting applications. Two internal photocells one for open-loop daylight sensing and one for closed-loop ambient light sensing effectively cut costs while providing exceptional photo sensing in residential, commercial, or retro-fit applications. The GLS-LDL-EX-BATT monitors natural daylight from windows and signals the lighting...

Due to the manufacturer shortage 4TEC has built an after market part that is available as a temporary replacement for this power supply. Please go to part number: 4TEC after market replacement for Crestron CSA-PWS10S-HUB No Ethernet to order replacement if you do not require an ethernet control port. The price is the same as the Crestron unit. The CSA-PWS10S-HUB-ENET Power Supply powers up to 10 Crestron Quiet Motor Technology roller shade or drapery system motors and features an...

FlipTop AC Power Outlet Module, Dual, Universal

Desktop Power Pack, 24VDC, 2.5A, 2.1mm, Universal plug. The PW-2420RU is a universal regulated power pack that is included with certain Crestron® products, and is available separately to power a variety of other Crestron products. It features an IEC type power inlet to enable universal compatibility with all types of electrical outlets.

Wall Mount Power Pack, 24 VDC, 0.75 A, Flying Leads, Universal

The MK-QM-RMCRX provides a means of mounting a QM-RX or QM-RMCRX-BA QuickMedia Receiver directly to the display device mount. The Pole Mount Kit supports mounting to any steel pole with 1.5 to 2 inch outer diameter.

The QM-FTCMK is an optional accessory kit designed to provide an easy pull-out cable solution for the QM-FTMC, QM-FTCC, and QM-FTDC FlipTop boxes. By placing cables at-the-ready within the FlipTop compartment, the QM-FTCMK kit eliminates the need to furnish separate cables when connecting a portable computer.

The QMI-FTCMK is an optional accessory kit designed to provide an easy pull-out cable solution for the QMI-FTMC, QMI-FTCC, and QMI-FTDC International FlipTop boxes. By placing cables at-the-ready within the FlipTop compartment, the QMI-FTCMK kit eliminates the need to furnish separate cables when connecting a portable computer.