Crestron

The CLTIBN circuit breaker terminal blocks are designed to install in CAENIB automation enclosures to provide load-side circuit breakers, and facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Each CLTIBN model includes a front escutcheon panel and hinged door assembly, and weighs approximately 1.82 kg (4.0 lb).

The CAENIB Series automation enclosures are designed to house Crestron's CLXI-Series lighting control modules with optional load-side circuit breakers, and a PAC2 or PAC2M control system. CAENIB enclosures are available in an assortment of sizes, suitable for surface or flush wall mount installation. Each model has been engineered to provide a clean and manageable installation with abundant provisions for wire termination and electrical knockouts.

The Crestron DIN-AP3MEX is a 3-Series Control System designed for DIN rail mounting applications. Built-in infiNET EX and ER wireless technology makes the DIN-AP3MEX ideal for all types of lighting, shading, AV, and climate control applications wherever a reliable wireless control solution is preferred. Wired Cresnet and Ethernet communication is also supported. Featuring the 3-Series control engine, the DIN-AP3MEX forms the core of any modern networked home or commercial building, managing...

The DIN-DALI-2 is a DALI interface for Crestron systems that provides control of up to 2 individual DALI loops. Housed in a DIN-rail enclosure, the DIN-DALI-2 is a great low-profile Cresnet or Ethernet companion to the DIN-AP3processor or any 3-Series control system. In addition to controlling the DALI data bus, it includes an integrated DALI power supply. Single-wire connectivity simplifies both new and retrofit installations, and Power-over-Ethernet (Poe) versatility assists in situations...

Ethernet to Cresnet Bridge for CAEN Automation Enclosures

The CH-RTHS-N is a wall mount temperature and relative humidity sensor. It mounts in a single‑gang UK or EU style electrical box and communicates directly with any Crestron® Control System via the Cresnet® control network. A complete installation requires an FP-INTENSE FP-PURE series faceplate (sold separately).

The CH-RTHS-N is a wall mount temperature and relative humidity sensor that communicates directly with any Crestron® Control System via the Cresnet® control network.  A complete installation requires an FP-INTENSE or FP-PURE series faceplate (sold separately).

The CH-RTHS-N is a wall mount temperature and relative humidity sensor. It mounts in a single‑gang UK or EU style electrical box and communicates directly with any Crestron® Control System via the Cresnet® control network. A complete installation requires an FP-INTENSE or FP-PURE series faceplate (sold separately).

The CH-RTHS-N is a wall mount temperature and relative humidity sensor that communicates directly with any Crestron® Control System via the Cresnet® control network.

The CH-RTHS-WM is a surface mount temperature and relative humidity sensor that communicates directly with any Crestron® Control System via the Cresnet® control network.

The CCS-BRKT-200-UTK is an optional mounting accessory for the CCS-UC-CODEC-200 Crestron RL 2 System Codec. It provides a pair of metal flanges that attach to the sides of the codec, allowing it to be screwed to the underside of a table with its top panel facing up. The complete assembly hangs two inches below the underside of the table and maintains full access to the codec's front and rear panels.

A 50 ft. (15 m) plenum rated 4-conductor link cable for use in connecting the BPC-8 Basic Presentation Controller to its companion interface module. Cable is blunt cut on each end, ready to be cut to length, stripped, and terminated using the screw terminal connectors provided with the BPC-8.