Crestron

The GLS-EM-CT is a current transformer designed for use with a GLS-EM-MCU Crestron Green Light Power Meter Control Unit[1]. Current transformers are vital to metering power. Crestron offers various split core models that work with 600, 400, and 200 Amp feeds; these devices clamp around main feeds. Solid core models exist for 50 and 20 Amp circuits; the wire must be routed through the closed loop of the core.

The CAEN Series automation enclosures are designed to house Crestron's CLX-Series lighting control modules and PAC2 or PAC2M control systems. CAEN enclosures are available in an assortment of sizes, suitable for surface or flush wall mount installation. Each model has been engineered to provide a clean and manageable installation with abundant provisions for wire termination and electrical knockouts.

The CLTIBN circuit breaker terminal blocks are designed to install in CAENIB automation enclosures to provide load-side circuit breakers, and facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Each CLTIBN model includes a front escutcheon panel and hinged door assembly, and weighs approximately 1.82 kg (4.0 lb).

The CLWI-SWEX-delivers native Crestron control to any light or other switched load in new or retrofit 230 Volt applications. Featuring reliable infiNET EX wireless technology, the CLWI-SWEX-can be installed in virtually any location thanks to reliable mesh networking. Support for up to 2 Amp loads makes this switch perfect for most applications.

The CLWI-SWEX-delivers native Crestron control to any light or other switched load in new or retrofit 230 Volt applications. Featuring reliable infiNET EX wireless technology, the CLWI-SWEX-can be installed in virtually any location thanks to reliable mesh networking. Support for up to 2 Amp loads makes this switch perfect for most applications.

The C2N-SDC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling a variety of motorized window treatments as well as motorized doors, sunroofs, lifts and projection screens. The C2N-SDC is a Cresnet device with two independently controlled 120V AC outputs. Each output provides up/down or open/close control of a conventional three-wire bidirectional type motor. Built-in timing and interlock logic make it easy to program the...

The C2N-SDC-DC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling 24 Volt DC motorized shades and drapes. The C2N-SDC-DC is a Cresnet device with two independently controlled 24V DC outputs, each designed to provide standard up/down or open/close control of a conventional two-wire bidirectional type motor.

The C2N-SSC-2 Somfy Shade Controller is a compact Cresnet device designed to provide a bidirectional serial interface for up to two Somfy ILT[1] Intelligent Shade Motors. Window treatments equipped with the Somfy ILT motor offer enhanced capability compared to typical three-wire models.

CAEN-CK Cover Kits are designed to extend the depth of Crestron's CAEN and CAENIB Automation Enclosures, affording 1.5 inch (3.81 cm) additional depth to accommodate EX ess wiring and third-party devices.

The CLXI-4IND inductor module provides noise suppression for up to 4 dimmed loads. Each channel inserts a high-inductance filter choke inline between any channel of a CLXI-Series dimmer module and its load. The CLXI-4IND occupies a single module space in a CAEN or CAENIB automation enclosure. Termination of high-voltage wiring to the module is facilitated by either a CLTI-4IND terminal block or CLTIBN-4IND circuit breaker terminal block, each sold separately to enable termination of the wiring...

The C2N-MNETGW is a 2-way RF gateway/transceiver designed to enable communications and management for a complete infiNET wireless network of dimmers, keypads, and other devices. The C2N-MNETGW links the infiNET network to a Crestron control system via Cresnet.

CAEN-CK Cover Kits are designed to extend the depth of Crestron's CAEN and CAENIB Automation Enclosures, affording 1.5 inch (3.81 cm) additional depth to accommodate EX ess wiring and third-party devices.