Automation

Crestron® Gravity Cable Retractors (FT2A-CBLR-GR Series) offer a refined cable management solution for use with Crestron FT2 Series FlipTops™. Each cable pulls out smoothly to any length up to 3 feet ( 0.9 meter) and stays out as long as it remains laying on the tabletop. Simply lifting the cable vertically above the FlipTop™ allows the cable to retract gently back into the FlipTop. Gravity cable retractors use a precision gravity-assisted track and pulley mechanism housed in a vertical...

Crestron® Gravity Cable Retractors (FT2A-CBLR-GR Series) offer a refined cable management solution for use with Crestron FT2 Series FlipTops™. Each cable pulls out smoothly to any length up to 3 feet ( 0.9 meter) and stays out as long as it remains laying on the tabletop. Simply lifting the cable vertically above the FlipTop™ allows the cable to retract gently back into the FlipTop. Gravity cable retractors use a precision gravity-assisted track and pulley mechanism housed in a vertical...

The USB Rapid Charging Module (FT2A-CHGR-USBA/C) is a single-space module designed for installation in a Crestron® FT2 ELEC Series FlipTop™. It provides one USB Type-C™ charging port and one USB Type-A charging port, which may be used simultaneously to quickly charge two mobile phones, laptops, or tablet devices at the table. The module is labeled with a backlit icon depicting the international symbol for a high-powered USB charging port.The USB-C™ port supports rapid charging of a single...

Crestron® FT2-CP Series Connector Plates offer a panel-mount interface solution for use with Crestron FT2 ELEC Series FlipTops™. Each connector plate installs in a single module space within the FlipTop™ to provide connectivity for AV sources and mobile devices using separate interface cables (interface cables not included). Several models of connector plates are offered, including HDMI® and DisplayPort models, as well as a model that converts USB Type-C™ to HDMI. Each of these models is...

Crestron® FT2-CP Series Connector Plates offer a panel-mount interface solution for use with Crestron FT2 ELEC Series FlipTops™. Each connector plate installs in a single module space within the FlipTop™ to provide connectivity for AV sources and mobile devices using separate interface cables (interface cables not included). Several models of connector plates are offered, including HDMI® and DisplayPort models, as well as a model that converts USB Type-C™ to HDMI. Each of these models is...

Crestron® FT2-CP Series Connector Plates offer a panel-mount interface solution for use with Crestron FT2 ELEC Series FlipTops™. Each connector plate installs in a single module space within the FlipTop™ to provide connectivity for AV sources and mobile devices using separate interface cables (interface cables not included). Several models of connector plates are offered, including HDMI® and DisplayPort models, as well as a model that converts USB Type-C™ to HDMI. Each of these models is...

Crestron® FT2-CP Series Connector Plates offer a panel-mount interface solution for use with Crestron FT2 ELEC Series FlipTops™. Each connector plate installs in a single module space within the FlipTop™ to provide connectivity for AV sources and mobile devices using separate interface cables (interface cables not included). Several models of connector plates are offered, including HDMI® and DisplayPort models, as well as a model that converts USB Type-C™ to HDMI. Each of these models is...

Crestron® FT2-CP Series Connector Plates offer a panel-mount interface solution for use with Crestron FT2 ELEC Series FlipTops™. Each connector plate installs in a single module space within the FlipTop™ to provide connectivity for AV sources and mobile devices using separate interface cables (interface cables not included). Several models of connector plates are offered, including HDMI® and DisplayPort models, as well as a model that converts USB Type-C™ to HDMI. Each of these models is...

Crestron® FT2-CP Series Connector Plates offer a panel-mount interface solution for use with Crestron FT2 ELEC Series FlipTops™. Each connector plate installs in a single module space within the FlipTop™ to provide connectivity for AV sources and mobile devices using separate interface cables (interface cables not included). Several models of connector plates are offered, including HDMI® and DisplayPort models, as well as a model that converts USB Type-C™ to HDMI. Each of these models is...

Crestron® FT2-CP Series Connector Plates offer a panel-mount interface solution for use with Crestron FT2 ELEC Series FlipTops™. Each connector plate installs in a single module space within the FlipTop™ to provide connectivity for AV sources and mobile devices using separate interface cables (interface cables not included). Several models of connector plates are offered, including HDMI® and DisplayPort models, as well as a model that converts USB Type-C™ to HDMI. Each of these models is...

Crestron® FT2-CP Series Connector Plates offer a panel-mount interface solution for use with Crestron FT2 ELEC Series FlipTops™. Each connector plate installs in a single module space within the FlipTop™ to provide connectivity for AV sources and mobile devices using separate interface cables (interface cables not included). Several models of connector plates are offered, including HDMI® and DisplayPort models, as well as a model that converts USB Type-C™ to HDMI. Each of these models is...

Provides a quantity of ten blank plates for use with Crestron® FT2 Series FlipTops™ to cover any unused module spaces within the FlipTop™. Each blank plate module fills and covers a single empty module space.Note: FT2 Series FlipTops ship with a quantity of blank plate modules included. Refer to the appropriate FlipTop spec sheet for more information. The FT2A-PLT-BLANK-10 provides additional blank plate modules to supplement those provided with the FlipTop. Key FeaturesFills a single empty...

Provides a quantity of ten keystone plate modules for use with Crestron® FT2 Series FlipTops™ to accommodate standard flush-mount keystone connectors such as the Crestron DigitalMedia™ Ultra Keystone RJ45 Jack (model DM-CONN-ULTRA-RECP-20, sold separately). The keystone module format is a universal standard that allows manufactures to produce all types of low-voltage connectors that simply snap into a keystone opening. FT2A-PLT-KEY-10 keystone plates allow a wide variety of connector types to...

Provides a quantity of ten cable pass-through plate modules for use with Crestron® FT2 Series FlipTops™ to accommodate Crestron FT2A-CBL-PT Series Pass-Through Cables and various other interface cables. Cable pass-through plates allow interface cables to be easily pulled out for use, and then dropped back into the FlipTop™ when done. When stowed in the FlipTop, the cable simply drops beneath the table while the connector remains neatly nested in the pass-through plate.Each cable pass-through...

The Crestron® FT2A-PWR-UN-1-C14 AC Power Outlet Module is designed for installation within a Crestron FT2 Series FlipTop™ to provide a single universal type receptacle above the table. It occupies two module spaces within the FlipTop, and is suitable for use in the United States, Canada, Mexico, Europe, United Kingdom, Japan, Korea, Singapore, Saudi Arabia, Australia, New Zealand, China, and other countries or regions where Commerce Department Plug Types B, F, G, or I power outlets are...

Crestron® FT2A-PWR-US Series AC Power Outlet Modules are designed for use with a Crestron FT2 Series FlipTop™ to provide one or more convenience receptacles to power laptops and other AC powered devices at the table. Three models are offered, providing a choice of one, two, or three NEMA 5 Type B outlets above the table. Each model also provides two outlets below the table. A single 8 foot (2.44 meter) long cable with grounded plug connects the AC power outlet module to an AC power source.Each...

Crestron® FT2A-PWR-US Series AC Power Outlet Modules are designed for use with a Crestron FT2 Series FlipTop™ to provide one or more convenience receptacles to power laptops and other AC powered devices at the table. Three models are offered, providing a choice of one, two, or three NEMA 5 Type B outlets above the table. Each model also provides two outlets below the table. A single 8 foot (2.44 meter) long cable with grounded plug connects the AC power outlet module to an AC power source.Each...

Crestron® FT2A-PWR-US Series AC Power Outlet Modules are designed for use with a Crestron FT2 Series FlipTop™ to provide one or more convenience receptacles to power laptops and other AC powered devices at the table. Three models are offered, providing a choice of one, two, or three NEMA 5 Type B outlets above the table. Each model also provides two outlets below the table. A single 8 foot (2.44 meter) long cable with grounded plug connects the AC power outlet module to an AC power source.Each...

The FT2A-UTK-PWS is a power supply designed for use with a Crestron FT2 ELEC series FlipTop™. A single power supply is included with each FlipTop. A second power supply may be purchased separately when required to support more than one (but not more than two) USB Rapid Charging Modules (model FT2A-CHGR-USBA/C). Each FT2A-UTK-PWS includes a mounting bracket, which allows attachment of the power supply to the FlipTop chassis beneath the table. A maximum of two power supplies may be connected to...

Provides a convenient solution for holding a DigitalMedia™ transmitter or similar device beneath the table as part of a complete Crestron® FT2 series FlipTop™ installation. Measures 12.16 x 10.08 inches (309 x 256 mm) and supports a maximum weight of 5 pounds (2.3 kg). Includes raised edges to prevent items from sliding off. Attaches easily without tools to any side of the FlipTop chassis beneath the table.A maximum of two shelves may be attached to a single FlipTop, with each shelf installed...

Crestron FTA-CP Connector Plates are designed for use with 600 Series FlipTop to provide panel-mounted connectors within the FlipTop connection compartment. Up to four connector plates can be installed in a single FlipTop (refer to the FlipTop spec sheet for additional information). An assortment of connector plates is offered:

Crestron FTA-CP Connector Plates are designed for use with 600 Series FlipTop to provide panel-mounted connectors within the FlipTop connection compartment. Up to four connector plates can be installed in a single FlipTop (refer to the FlipTop spec sheet for additional information). An assortment of connector plates is offered:

Crestron FTA-CP Connector Plates are designed for use with 600 Series FlipTop to provide panel-mounted connectors within the FlipTop connection compartment. Up to four connector plates can be installed in a single FlipTop (refer to the FlipTop spec sheet for additional information). An assortment of connector plates is offered:

Crestron FTA-CP Connector Plates are designed for use with 600 Series FlipTop to provide panel-mounted connectors within the FlipTop connection compartment. Up to four connector plates can be installed in a single FlipTop (refer to the FlipTop spec sheet for additional information).