Automation

Crestron FTA-CP Connector Plates are designed for use with 600 Series FlipTop to provide panel-mounted connectors within the FlipTop connection compartment. Up to four connector plates can be installed in a single FlipTop (refer to the FlipTop spec sheet for additional information).

Crestron FTA-PWR series AC Power Outlet Modules are designed for use with any 600 Series FlipTop to provide convenience receptacles within the FlipTop connection compartment. A selection of modules is available to support a range of different countries and regions.

Crestron FTA-PWR series AC Power Outlet Modules are designed for use with any 600 Series FlipTop to provide convenience receptacles within the FlipTop connection compartment. A selection of modules is available to support a range of different countries and regions.

Crestron FTA-PWR series AC Power Outlet Modules are designed for use with any 600 Series FlipTop to provide convenience receptacles within the FlipTop connection compartment. A selection of modules is available to support a range of different countries and regions.

Crestron FTA-PWR series AC Power Outlet Modules are designed for use with any 600 Series FlipTop to provide convenience receptacles within the FlipTop connection compartment. A selection of modules is available to support a range of different countries and regions.

Crestron FTA-PWR series AC Power Outlet Modules are designed for use with any 600 Series FlipTop to provide convenience receptacles within the FlipTop connection compartment. A selection of modules is available to support a range of different countries and regions.

FlipTop AC Power Outlet Module, Dual, Universal

The FTI-PWR-D FlipTop Power Center by Crestron provides an elegant connectivity solution in a stylish flush mount tabletop design. Popping open the "FlipTop lid EX oses the cable storage compartment where interface cables are kept at the ready for plugging in laptop computers, mobile devices, AV sources, and other equipment.

The FTI-PWR-D FlipTop Power Center by Crestron provides an elegant connectivity solution in a stylish flush mount tabletop design. Popping open the "FlipTop lid EX oses the cable storage compartment where interface cables are kept at the ready for plugging in laptop computers, mobile devices, AV sources, and other equipment.

Building Management Systems Interface; requires factory configuration, programming and start-up. Please contact Crestron Sales Support Services. [Limited Supply]

The GLA-PWS50 is a 50 Watt Cresnet Power Supply designed for use with a Crestron Green Light system, or anywhere a wall-mountable Cresnet power supply is needed. The GLA-PWS50 mounts conveniently over a 4" square or 2-gang electrical box. All connections are made inside the electrical box via flying leads using twist-on wire connectors. A partition is included to isolate high voltage from Class 2 wiring within the box.

The GLA-PWSI50 is a 50 Watt Cresnet Power Supply designed for use with a Crestron Green Light system, or anywhere a wall-mountable Cresnet power supply is needed. It is compatible with any line voltage from 100 to 240 Volts, 50 or 60 Hz.

Crestron Green Light® Enclosure, Main Lug Only, 120 V, 42 Breakers, 250 A

The GLS-LDL-EX-BATT is a battery-powered, wireless, dual-loop photo sensor designed to provide superior natural light sensing and indoor light control in daylight harvesting applications. Two internal photocells one for open-loop daylight sensing and one for closed-loop ambient light sensing effectively cut costs while providing exceptional photo sensing in residential, commercial, or retro-fit applications. The GLS-LDL-EX-BATT monitors natural daylight from windows and signals the lighting...

Crestron Green Light sensors deliver a powerful and cost-effective solution for reducing energy costs and enhancing the functionality of lighting and environmental systems. The GLS-OIR-CSM-EX-BATT is a low-profile, battery-powered occupancy sensor designed for small areas up to 500 square feet to detect when the room is occupied. The GLS-OIR-CSM-EX-BATT allows for wireless connection to a Crestron control system via the infiNET EX wireless network.

Crestron® occupancy sensors and daylight sensors offer a powerful, cost-saving solution for reducing energy consumption and enhancing system functionality. As part of a complete Crestron system, they can be used to enable automation of lighting, shading, HVAC, and AV equipment in a conference room, classroom, office, hallway, or other space. Using Crestron sensors, room lighting can automatically turn on when the room is occupied, turn off when it is vacant, and dim to a lower level when there...

HD to USB Video Converter

Do you need to feed two video displays from one HDMI source Or, split an HDMI signal between a display and a surround sound processor Need to break out the HDMI audio signal and convert it to SPDIF or analog Or, merge separate digital audio and video sources into one HDMI stream Not a problem just use the HD-DA-2.

The Crestron® HD-DA4-4K-E is a simple to use, high-performance distribution amplifier designed to split a single HDMI® signal to feed up to four separate displays, switchers, AV receivers, and other devices. It handles Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP, 3D, Deep Color, and high-bitrate 7.1 audio. No programming or control system is required for operation.For smaller or larger applications, please see the two-output HD-DA2-4K-E and the eight-output...

1:4 HDMI® Distribution Amplifier w/4K60 4:4:4 & HDR SupportSplits one HDMI® source to four separate outputs. Supports 4K60 4:4:4 and HDR video signals with high-bitrate 7.1 audio.

The Crestron® HD-DA8-4K-E is a simple to use, high-performance distribution amplifier designed to split a single HDMI® signal to feed up to eight separate displays, switchers, AV receivers, and other devices. It handles Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP, 3D, Deep Color, and high-bitrate 7.1 audio. No programming or control system is required for operation.For smaller applications, please see the two-output HD-DA2-4K-E and the four-output HD-DA4-4K-E. Key...

The HD-EXT-USB-2000-C is a point-to-point signal extender for HDMI®, USB 2.0, RS-232, IR, and Ethernet signals. Analog audio input and/or output signals are also supported in combination with HDMI video. The HD-EXT-USB-2000-C is ideal for use with a single HD or UHD display device and USB camera to extend the signal wiring from an AV media source, computer, central equipment cabinet, or Crestron Mercury™ Tabletop Conference System.The extender is composed of a compact transmitter and receiver...

The Crestron4K HDMI over HDBaseT extender (HD-EXT3-C) delivers a professional-grade digital HD AV signal extension solution for use in the home, classroom, auditorium, or corporate boardroom. Without any special setup or configuration, the HD-EXT3-C enables the transmission of ultra high-definition digital video and audio, plus RS-232 and IR control, over wire runs up to 330 feet (100 meters) using a single CAT type twisted pair cable.[1]

The Crestron4K HDBaseT extender (HD-EXT3-C) delivers a professional-grade digital HD AV signal extension solution for use in the home, classroom, auditorium, or corporate boardroom. Without any special setup or configuration, the HD-EXT3-C enables the transmission of ultra high-definition digital video and audio, plus RS-232 and IR control, over wire runs up to 330 feet (100 meters) using a single CAT type twisted pair cable.[1]