Automation

The ST-CNB is a parallel distribution block and converter designed for termination of multiple Cresnet cables, and adapting between several 4-wire Cresnet cables and modular type Cresnet cables. Two 4-pin Cresnet connectors and four 6-pin RJ11 jacks are provided, all wired in parallel

The ST-CS is a Cresnet expansion module that provides power sensing of two individual devices such as televisions, AV receivers, and many other AC powered device. A typical application for current sensing is to provide confirmation of the device's power on/off state. This is often necessary to enable reliable power control for IR controlled devices that do not include discrete power commands in their IR control protocol. The ST-CS may be used to provide a current sensing interface wherever...

The ST-IO is a Cresnet expansion module that provides eight low-voltage relay outputs and four digital/analog input ports. Typical applications include control of lighting, screens, drapes, and more. In "closure" mode, each input port will sense a contact closure signal from a door switch, motion sensor, etc., and can also accept analog 0-24 Volt DC signals when in "voltage" mode. The ST-IO may be used to provide a low-voltage control interface at a remote location, or may be rack mounted in...

The ST-PC is a Cresnet expansion module that provides switching of AC power to two individual loads for on/off control of video monitors, tape decks, small audio amplifiers, and other AC powered devices. The ST-PC may be used to provide a power control interface wherever required for loads up to 1200 Watts, and may be rack-mounted using the optional ST-RMK rack mount kit (sold separately). Communication with the control system is via a single Cresnet connection.

The ST-SPL splits one Crestron iR port into five, allowing control of up to five dissimilar devices via multiple STIRP infrared probes.

The ST-VS is a Cresnet expansion module that is used to sense the

The ST-XX is an interface cable for connection of any controllable third-party device to an RJ11 type Crestron COM port. Contact Crestron for exact models and configurations.

The STCP-501 is an adaptor allowing for the connection of a DB9-equipped RS-232 cable to an RJ-11 type Crestron COM port.

The ST-CS is a Cresnet expansion module that provides power sensing of two individual devices such as televisions, AV receivers, and many other AC powered device. A typical application for current sensing is to provide confirmation of the device's power on/off state. This is often necessary to enable reliable power control for IR controlled devices that do not include discrete power commands in their IR control protocol. The ST-CS may be used to provide a current sensing interface wherever...

The ST-IO is a Cresnet expansion module that provides eight low-voltage relay outputs and four digital/analog input ports. Typical applications include control of lighting, screens, drapes, and more. In "closure" mode, each input port will sense a contact closure signal from a door switch, motion sensor, etc., and can also accept analog 0-24 Volt DC signals when in "voltage" mode. The ST-IO may be used to provide a low-voltage control interface at a remote location, or may be rack mounted in...

The ST-PC is a Cresnet expansion module that provides switching of AC power to two individual loads for on/off control of video monitors, tape decks, small audio amplifiers, and other AC powered devices. The ST-PC may be used to provide a power control interface wherever required for loads up to 1200 Watts, and may be rack-mounted using the optional ST-RMK rack mount kit (sold separately). Communication with the control system is via a single Cresnet connection.

The ST-VS is a Cresnet expansion module that is used to sense the

In order to provide a best-in-class end-user experience and continue to provide the highest level of customer support, all Crestron 3-Series® Control Systems require a Lighting System Activation Key in order to communicate with a Lutron® or Vantage® residential lighting system over IP.

In order to provide a best-in-class end-user experience and continue to provide the highest level of customer support, all Crestron 3-Series® Control Systems require a Lighting System Activation Key in order to communicate with a Lutron® or Vantage® residential lighting system over IP.

One platform, complete control and automation

Activates the built-in AirMedia® feature of the 3-Series® 4K DigitalMedia™ Presentation System 250 and 350 (models DMPS3-4K-250-C and DMPS3-4K-350-C). Enables wireless presentation of content from a laptop, smartphone, or tablet device via a Wi-Fi® wireless network.

Seamlessly monitor and manage boardrooms, classrooms, lecture halls, video conferencing rooms, and more with Fusion RV. View room and device statuses from the web-based user interface; remotely control and chat with rooms via the built-in help desk; view reports showing room usage; receive email alerts when a display is offline. With resource management, the Fusion RV room-scheduling engine seamlessly books rooms via Outlook, IBM Notes, College NET 25Live (R25), and Google Calendar or right...

Room SchedulingCrestron Fusion network room scheduling integrates with popular calendaring programs you’re already using to improve workflow and room usage.Connects to Microsoft Exchange®, Office 365, Google® Calendar™, IBM® Notes®, CollegeNet® R25® to 25Live®, and moreBook rooms from scheduling panels outside the room for ad hoc meetingsClearly see room availability on scheduling panels or room signs from down the hallDisplay room calendar on Crestron in-room touch screens and even on the...

Room SchedulingCrestron Fusion network room scheduling integrates with popular calendaring programs you’re already using to improve workflow and room usage.Connects to Microsoft Exchange®, Office 365, Google® Calendar™, IBM® Notes®, CollegeNet® R25® to 25Live®, and moreBook rooms from scheduling panels outside the room for ad hoc meetingsClearly see room availability on scheduling panels or room signs from down the hallDisplay room calendar on Crestron in-room touch screens and even on the...

Room SchedulingCrestron Fusion network room scheduling integrates with popular calendaring programs you’re already using to improve workflow and room usage.Connects to Microsoft Exchange®, Office 365, Google® Calendar™, IBM® Notes®, CollegeNet® R25® to 25Live®, and moreBook rooms from scheduling panels outside the room for ad hoc meetingsClearly see room availability on scheduling panels or room signs from down the hallDisplay room calendar on Crestron in-room touch screens and even on the...

Room SchedulingCrestron Fusion network room scheduling integrates with popular calendaring programs you’re already using to improve workflow and room usage.Connects to Microsoft Exchange®, Office 365, Google® Calendar™, IBM® Notes®, CollegeNet® R25® to 25Live®, and moreBook rooms from scheduling panels outside the room for ad hoc meetingsClearly see room availability on scheduling panels or room signs from down the hallDisplay room calendar on Crestron in-room touch screens and even on the...

Room SchedulingCrestron Fusion network room scheduling integrates with popular calendaring programs you’re already using to improve workflow and room usage.Connects to Microsoft Exchange®, Office 365, Google® Calendar™, IBM® Notes®, CollegeNet® R25® to 25Live®, and moreBook rooms from scheduling panels outside the room for ad hoc meetingsClearly see room availability on scheduling panels or room signs from down the hallDisplay room calendar on Crestron in-room touch screens and even on the...