Crestron

The DIN-1TSTAT8 is an 8-zone thermostat designed for use with radiant heating systems. Each zone requires a remote temperature sensor to be installed in each heating zone. Compatible sensors include models CHVI-RTS-1G-SM-W, CHVI-RTS-1G-N-W, and CHV-RTS. Each sensor connects to the DIN-1TSTAT8 via a single twisted pair wire. The DIN-1TSTAT8 installs at a central location in a DIN rail enclosure, and connects to a Crestron® control system or Crestron Pyng® system via Cresnet®.[1]Its connection...

The ENTTEC DIN-ODE POE Mk2 (sold by Crestron® as model DIN-SACN-DMX) is a cost-effective and reliable Ethernet to DMX convertor. It supports sACN, Art-Net, and ESP protocols, and is designed to enable integration between DMX and network controllable lighting devices and systems. As part of a Crestron architectural lighting system, it allows a 3-Series® control processor to communicate via sACN with any DMX lighting fixture or controller. Key FeaturesConverts between DMX512A and sACN, Art-Net,...

The DIN-TSTAT-FCU is a fan coil unit (FCU) controller designed for use in two-pipe applications. It may be operated as a standalone controller or integrated with a home automation system or building management system (BMS). A Cresnet® port is provided for integration with a Crestron® control system or Crestron Pyng® system. An RS-485 port is also included for communication with Modbus® or BACnet™. Full programmability enables use in various types of applications beyond control of FCUs....

The DIN-TSTATIM-FCU-120 High Voltage FCU Thermostat Interface adapts a Crestron® FCU type thermostat to control a 120 Volt Fan Coil Unit HVAC system. It includes a built-in 24 Volt AC transformer to power the thermostat, and is compatible with Crestron CHV-TSTAT-FCU and CHV-TSTATEX-FCU series thermostats (sold separately).Standard 35 mm DIN rail mounting allows the DIN-TSTATIM-FCU-120 to be installed in a DIN rail enclosure (Crestron DIN-EN series or similar). It occupies 9 DIN module spaces,...

The DIN-TSTATIM-FCU-277 High Voltage FCU Thermostat Interface adapts a Crestron® FCU type thermostat to control a 277 Volt Fan Coil Unit HVAC system. It includes a built-in 24 Volt AC transformer to power the thermostat, and is compatible with Crestron CHV-TSTAT-FCU and CHV-TSTATEX-FCU series thermostats (sold separately).Standard 35 mm DIN rail mounting allows the DIN-TSTATIM-FCU-277 to be installed in a DIN rail enclosure (Crestron DIN-EN series or similar). It occupies 9 DIN module spaces,...

A DMB-4K-CPU-128 CPU blade is included with every DM-MD128X128 DigitalMedia™ Switcher. It may also be purchased separately to provide a backup replacement or as an upgrade to an older CPU blade. Replacement of the CPU blade can be performed on site without requiring any tools and without removing the switcher from the equipment rack. Replacement takes just seconds, although a system reboot may be required to activate the new CPU.The DMB-4K-CPU-128 features several enhancements over its...

A DMB-4K-CPU-64 CPU blade is included with every DM-MD64X64 DigitalMedia™ Switcher. It may also be purchased separately to provide a backup replacement or as an upgrade to an older CPU blade. Replacement of the CPU blade can be performed on site without requiring any tools and without removing the switcher from the equipment rack. Replacement takes just seconds, although a system reboot may be required to activate the new CPU.The DMB-4K-CPU-64 features several enhancements over its...

The DMC-4KZ-C-DSP is an input card designed for use with any card-based Crestron® DigitalMedia™ Switcher. It provides one DM 8G+® input, with complementary HDMI® pass-through and analog audio outputs. Using a single CAT type twisted pair cable, the DM 8G+ input enables the connection of a DM 8G+ transmitter, the output of another DM® switcher, or an HDBaseT® certified source.[1]The DMC-4KZ-C-DSP provides all of the features of the DMC-4KZ-C with the addition of downmixing to enable the...

The DM-DA4-4K-C is a DigitalMedia™ accessory that converts and splits a single 4K60 HDMI® signal to feed four separate DM 8G+® or HDBaseT® receivers. A single HDMI output is included to pass the input through to a local display, audio processor, switcher, or another DM-DA4-4K-C. Video and audio are passed from the input to all five outputs simultaneously without any change or degradation.PoDM+ and HDBaseT PoE+ power sourcing is enabled at all four DM® ports by adding a PoDM power supply (model...

Power over DM® (PoDM) is a feature of Crestron® DigitalMedia 8G+® technology that enables many DM 8G+® transmitters and receivers to be powered over the same CATx cable that carries their video, audio, and data signals. Using PoDM affords a one-wire interface solution, and eliminates the need to install a bulky power pack at every transmitter and receiver location.[1]The DM-PSU-16-PLUS supplies power for up to sixteen PoDM, PoDM+, HDBaseT® PoE, or HDBaseT PoE+ powered devices. It is designed...

Provide a simple, scalable, and consistent classroom experienceCrestron® Campus Technology Solutions offer a quick path to transforming and standardizing every classroom, lab, and meeting space across an entire college campus. Each kit comes ready-to-deploy and includes everything you need to provide a consistent multimedia classroom experience for instructors and students. Each room features simple and intuitive functionality, so an instructor or guest lecturer can simply walk into any room...

Provide a simple, scalable, and consistent classroom experienceCrestron® Campus Technology Solutions offer a quick path to transforming and standardizing every classroom, lab, and meeting space across an entire college campus. Each kit comes ready-to-deploy and includes everything you need to provide a consistent multimedia classroom experience for instructors and students. Each room features the same informative on-display welcome screen and intuitive touch screen UI, so an instructor or...