Automation

Designed for use with a Crestron V-Panel HD Touch Screen Display[1,2], the DGE-2 Digital Graphics Engine allows for a very streamlined touch screen installation by placing the bulk of the electronics out of sight at the central equipment location. Mounted within an equipment rack, the DGE-2 connects directly to the head end AV sources, switchers, and control network, while the touch screen display can be up to 300 feet (91 meters) away with just a single cable between them[3].

The DIN-1TSTAT8 is an 8-zone thermostat designed for use with radiant heating systems. Each zone requires a remote temperature sensor to be installed in each heating zone. Compatible sensors include models CHVI-RTS-1G-SM-W, CHVI-RTS-1G-N-W, and CHV-RTS. Each sensor connects to the DIN-1TSTAT8 via a single twisted pair wire. The DIN-1TSTAT8 installs at a central location in a DIN rail enclosure, and connects to a Crestron® control system or Crestron Pyng® system via Cresnet®.[1]Its connection...

The Crestron® DIN-2LEDPWM8 is a two channel RGBW dimmer that uses PWM (pulse width modulation) frequency for flicker-free performance. A Cresnet® control port is provided for integration with a Crestron control system.The Crestron® DIN-2LEDPWM8 is a two-channel RGBW LED and LED strip dimmer. It uses PWM (pulse width modulation) frequency to provide flicker-free performance throughout the dimming range.Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron...

4-Series™ DIN Rail Control System

The ENTTEC DIN-ODE POE Mk2 (sold by Crestron® as model DIN-SACN-DMX) is a cost-effective and reliable Ethernet to DMX convertor. It supports sACN, Art-Net, and ESP protocols, and is designed to enable integration between DMX and network controllable lighting devices and systems. As part of a Crestron architectural lighting system, it allows a 3-Series® control processor to communicate via sACN with any DMX lighting fixture or controller. Key FeaturesConverts between DMX512A and sACN, Art-Net,...

The DIN-TSTAT-FCU is a fan coil unit (FCU) controller designed for use in two-pipe applications. It may be operated as a standalone controller or integrated with a home automation system or building management system (BMS). A Cresnet® port is provided for integration with a Crestron® control system or Crestron Pyng® system. An RS-485 port is also included for communication with Modbus® or BACnet™. Full programmability enables use in various types of applications beyond control of FCUs....

The DIN-TSTATIM-FCU-120 High Voltage FCU Thermostat Interface adapts a Crestron® FCU type thermostat to control a 120 Volt Fan Coil Unit HVAC system. It includes a built-in 24 Volt AC transformer to power the thermostat, and is compatible with Crestron CHV-TSTAT-FCU and CHV-TSTATEX-FCU series thermostats (sold separately).Standard 35 mm DIN rail mounting allows the DIN-TSTATIM-FCU-120 to be installed in a DIN rail enclosure (Crestron DIN-EN series or similar). It occupies 9 DIN module spaces,...

The DIN-TSTATIM-FCU-277 High Voltage FCU Thermostat Interface adapts a Crestron® FCU type thermostat to control a 277 Volt Fan Coil Unit HVAC system. It includes a built-in 24 Volt AC transformer to power the thermostat, and is compatible with Crestron CHV-TSTAT-FCU and CHV-TSTATEX-FCU series thermostats (sold separately).Standard 35 mm DIN rail mounting allows the DIN-TSTATIM-FCU-277 to be installed in a DIN rail enclosure (Crestron DIN-EN series or similar). It occupies 9 DIN module spaces,...

The DM-DA4-4K-C is a DigitalMedia™ accessory that converts and splits a single 4K60 HDMI® signal to feed four separate DM 8G+® or HDBaseT® receivers. A single HDMI output is included to pass the input through to a local display, audio processor, switcher, or another DM-DA4-4K-C. Video and audio are passed from the input to all five outputs simultaneously without any change or degradation.PoDM+ and HDBaseT PoE+ power sourcing is enabled at all four DM® ports by adding a PoDM power supply (model...

The DM-DR is designed for use with DM CAT transmitters and receivers to enable extended cable lengths up to 450 ft. (137 m)[1]. Up to 2 repeaters per DM device may be required. Please consult the spec sheet for each DM CAT device to confirm actual capabilities.

Crestron® DM® Switchers provide the foundation for a complete DigitalMedia™ system, delivering an advanced 4K ultra high-definition AV signal routing solution that’s extremely flexible and installer-friendly. The DM-MD128X128 is a modular matrix switcher designed for large-scale projects demanding ultimate reliability. It delivers ultra fast signal routing and pure, lossless distribution of HDMI® and other signals to support all the digital media players, HDTV receivers, computers, cameras,...